Make sure this part fits

GM 19152329
Inner Tie Rod

1999-2007 GM

Customer Questions & Expert Answers (14)
GM 19152329 Inner Tie Rod
GM 19152329 Inner Tie Rod
  • Part Description
    Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Tie Rod End
  • Position
    Inner
  • Replaces
    26079801, 26076543
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    1999-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 5.3 L GAS, 8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19152329 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 19152329 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What adjustment should be made after installation for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Adjust the front toe.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    What is the lubrication step for installation for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Lubricate the tie rod threads with chassis lubricant.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    What are the final steps after installation for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Reinstall the rack and pinion boot, the tire and wheel, lower the vehicle, and perform a four-wheel alignment.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    What type of nut should be secured to the outer tie rod ball stud for the 2006 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Secure the new prevailing torque nut.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    What should be done to the tapered surface of the steering knuckle for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Clean the tapered surface.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    Can the nut from the outer tie rod ball stud be reused for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    No, do not reuse the nut.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    What is the first step in servicing and repairing the steering linkage inner tie rod for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Begin by removing the engine shield if equipped.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    What are the torque specifications for tightening the nut for the 2006 Chevrolet Tahoe? Posted by Customer
    A:
    Tighten it to 50 Nm (37 ft. lbs.) for 15 series vehicles or 65 Nm (48 ft. lbs.) for 25/35 series vehicles.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    What should be done after separating the tie rods and ball joints for the 2006 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the nut from the outer tie rod ball stud.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    What is the first step in servicing and repairing the steering linkage inner tie rod for the 2007 GMC Sierra 1500? Posted by Customer
    A:
    Begin by removing the engine shield if equipped.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    What should be done after securing the outer tie rod end to the steering knuckle for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Install the outer tie rod end retaining bracket and tighten the retaining bolts to 65 Nm (48 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    How do you separate the inner tie rod from the steering gear rack for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Use a pipe wrench on the steering gear rack next to the steering linkage inner tie rod housing and a wrench on the flats of the steering linkage inner tie rod housing. Rotate the housing counterclockwise while holding the steering gear rack stationary until the inner tie rod separates from the rack.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    Q:
    What is the lubrication step for installation for the 2006 GMC Yukon? Posted by Customer
    A:
    Lubricate the tie rod threads with chassis lubricant.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Tie Rod
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Inner Tie Rod 19152329 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19152329 Inner Tie Rod is available in the market under the name GM Tie Rod. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19152329 Inner Tie Rod fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 19152329 maintains top performance when functioning as the Rod Kit, Steering Linkage Inner Tie; Steering Tie Rod End; Tie Rod End unit at its Inner. The component 19152329 is constructed from durable material and its dimensions span 4.2 x 4.0 x 19.6 inches while weighing 2.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Rod Kit, Steering Tie Rod Inner. The part 19152329 has available replacement options 26079801, 26076543. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.