Make sure this part fits

GM 15110651
Lock, Rear Driver Side

2000-2007 GM

Customer Questions & Expert Answers (20)
GM 15110651 Lock, Rear Driver Side
GM 15110651 Lock, Rear Driver Side
  • Part Description
    Latch, Rear Side Door; Door Latch Assembly; Door Lock
  • Position
    Rear Driver Side
  • Replaces
    15068504
  • Manufacturer
    General Motors
Make sure this part fits
$250.16 MSRP: $372.34
You Save: $122.18 (33%)
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2001-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2001-2004 Chevrolet Silverado 2500Base, LS, LT, WT8 Cyl 6.0 L BI-FUEL, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 15110651 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 15110651 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the first step to replace the front door lock actuator for the 2002 Cadillac Escalade? Posted by Customer
    A:
    Raise the window glass.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What should be done after tightening the bottom two bolts for the 2004 Cadillac Escalade EXT? Posted by Customer
    A:
    Open the door and install the upper bolt.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Latch Assembly
    Q:
    What is the next step after disconnecting the manual door lock rod for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Remove the rubber plug to disengage the outside handle rod retainer, then disconnect the cylinder lock rod.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What should be done if the door lock actuator is equipped with an electrical connector for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Disconnect the electrical connector from the door lock actuator and remove the control rods as necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What should be removed after raising the window glass for the 2002 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Remove the door trim panel and the water deflector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What needs to be disconnected from the handle retainer clip for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Disconnect the inside door lock rod.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What is the next step after disconnecting the latch rod for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Install the latch rod to the latch.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Latch Assembly
    Q:
    What is the final step in the process for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Reinstall the door trim panel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Latch Assembly
    Q:
    What should be connected to the handle retainer clip for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    Connect the inside door lock rod to the handle retainer clip.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What should be connected to the door lock actuator during installation for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    The electrical connectors, if equipped.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What is the torque specification for tightening the bolts for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    9 N.m (80 lb in).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What should be connected after securing the door lock actuator for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    The manual door lock to the door retainer clips.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What should be done if the door lock actuator is equipped with an electrical connector for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Disconnect the electrical connector from the door lock actuator and remove the control rods as necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What is the final step in the process for the 2004 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the latch retaining bolts and the door trim panel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Latch Assembly
    Q:
    What should be removed after raising the window glass for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Remove the door trim panel and the water deflector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What is the torque specification for tightening the upper bolt for the 2004 GMC Yukon? Posted by Customer
    A:
    Tighten it to 9 N.m (80 lb in).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Latch Assembly
    Q:
    What needs to be removed to disengage the outside handle rod retainer for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    The rubber plug.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What is the next step after disconnecting the rods for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Remove the bolts that retain the door lock actuator to the door.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    Q:
    What is the next step after disconnecting the manual door lock rod for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Remove the rubber plug to disengage the outside handle rod retainer, then disconnect the cylinder lock rod.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Door Lock Actuator
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Lock, Rear Driver Side 15110651 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15110651 Lock, Rear Driver Side is available in the market under the name GM Door Lock, Door Lock Actuator, Door Latch Assembly. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15110651 Lock, Rear Driver Side fits certain Chevrolet Tahoe, Silverado 1500, Silverado 2500 HD models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 15110651 maintains top performance when functioning as the Latch, Rear Side Door; Door Latch Assembly; Door Lock unit at its Rear Driver Side. The component 15110651 is constructed from durable material and its dimensions span 12.2 x 8.3 x 6.2 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Latch; Latch, Door Lock. The part 15110651 has available replacement options 15068504. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.