Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 17113698
Injector

2001-2007 GM

Customer Questions & Expert Answers (26)
GM 17113698 Injector
  • Part Description
    Injector, Multiport Fuel; Fuel Injector
  • Manufacturer
    General Motors
Make sure this part fits
$112.36 MSRP: $228.20
You Save: $115.84 (51%)
1
ADD TO CART
  • 2004 GMC Envoy XUV Injector Diagram for 17113698
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 17113698

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004 Buick RainierCXL, CXL Plus8 Cyl 5.3 L GAS
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2007 Chevrolet Express 1500Base, LS, LT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2003-2007 Chevrolet Express 2500Base, LS, LT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2003-2007 Chevrolet Express 3500Base, LS, LT8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L GAS
    2003-2004 Chevrolet SSRBase8 Cyl 5.3 L GAS
    2001-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, SS, WT, Z71 Off-Road8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 17113698 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 17113698 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What are the steps after filling the injector cleaning tank for the 2004 Buick Rainier? Posted by Customer
    A:
    Disable the vehicle's fuel pump, disconnect the fuel lines, and plug them using the appropriate shut-off adapters. Connect the J 38500-A to the fuel rail, pressurize it to 510 kPa (75 psi), and run the engine until it stalls.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What is the next step after installing the O-ring seals for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Attach a new retainer clip to the fuel injector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What additional step should be taken for maintaining injector performance for the 2005 Cadillac Escalade EXT? Posted by Customer
    A:
    Add one ounce of Port Fuel Injector Cleaner (GM P/N 12345104 or Canadian P/N 10953467) to the fuel tank for each gallon of gasoline and advise the customer to change fuel brands and use the cleaner regularly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What type of cleaner should be used and how should it be applied for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Use GM Top Engine Cleaner exclusively, ensuring it is not added to the fuel tank to avoid damage to the fuel pump and components. Maintain a maximum concentration of 10% cleaning solution, utilizing a total of 960 ml (32.4 oz) of solution for the J 38500-A.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What is special about the Denso fuel injectors in the 5.3L (L59) E85 application for the 2004 Chevrolet Express 1500? Posted by Customer
    A:
    They do not have O-rings and retaining clips serviced separately; they must be replaced whenever an O-ring or clip needs replacement.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What happens if the O-rings and retaining clips need to be replaced for the 2007 Chevrolet Express 2500? Posted by Customer
    A:
    The entire injector must be replaced if these components need to be replaced.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    How should the fuel injector be inserted into the fuel rail injector socket for the 2003 Chevrolet Express 3500? Posted by Customer
    A:
    With the electrical connector facing outward, ensuring the retainer clip locks onto a flange on the fuel rail injector socket.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What should be ensured when locking the retainer clip for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Ensure the retainer clip locks onto a flange on the fuel rail injector socket.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What should US dealers do with GM Top-Engine Cleaner for the 2004 Chevrolet SSR? Posted by Customer
    A:
    Empty two 24 ml (0.812 oz) containers of GM Top-Engine Cleaner (P/N 12346535) into the J 38500-A.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    Why is it important to be aware of leaking fuel injectors for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Leaking fuel injectors may contaminate the engine oil.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What is the final step in the process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Reinstall the fuel meter body.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    How long should the engine be idled during the cleaning process for the 2006 Chevrolet Silverado 3500? Posted by Customer
    A:
    Start and idle the engine until it stalls due to lack of fuel, which should take about 15-20 minutes.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What should be done before installing the new injector for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Lubricate the new injector O-ring seals (2, 4) with clean engine oil and install them on the injector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    How do you pressurize the fuel system for the 2006 Chevrolet Silverado 1500? Posted by Customer
    A:
    Connect the J 44466-10 hose to the J 44466-12 and open the valve on the J 44466-10 to pressurize the fuel system, ensuring a minimum pressure of 150 psi is achieved.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    How should the cleaning agent be used for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    It should not be added to the fuel tank and the concentration must not exceed 10 percent.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What test should be performed after cleaning the injectors for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Perform the Injector Balance Test, recording the fuel pressure drop from each injector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What test should be performed after cleaning the injectors for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Perform the Injector Balance Test, recording the fuel pressure drop from each injector, and replace any injector with a drop greater than 15 kPa (2 psi) if necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What is the mixing instruction if using another brand for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Mix 96 ml (3.24 oz) of Top-Engine Cleaner with 864 ml (29.16 oz) of regular unleaded gasoline.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What is special about the Denso fuel injectors in the 5.3L (L59) E85 application for the 2004 GMC Savana 1500? Posted by Customer
    A:
    They do not have O-rings and retaining clips serviced separately; they must be replaced whenever an O-ring or clip needs replacement.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What should be done before installing the new injector for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Lubricate the new injector O-ring seals (2, 4) with clean engine oil and install them on the injector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    How should the O-ring seals be prepared before installation for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    They should be lubricated with clean engine oil.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What test should be performed after cleaning the injectors for the 2005 GMC Yukon? Posted by Customer
    A:
    Perform the Injector Balance Test, recording the fuel pressure drop from each injector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What tools are necessary to clean the fuel injectors for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Fuel Line Shut-Off Adapters (J 37287), Fuel Injector Cleaner (J 35800-A), 3/8 Fuel Line Shut-Off Valve (J 42873-1), 5/16 Return Pipe Shut-Off Valve (J 42873-2), 3/8 Fuel Pipe Shut-Off Valve (J 42964-1), and 5/16 Fuel Pipe Shut-Off Valve (J 42964-2).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What is the final step in the process for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Reinstall the fuel meter body.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    Q:
    What final step should be taken after the cleaning process for the 2006 GMC Sierra 3500? Posted by Customer
    A:
    Road test the vehicle to ensure the customer concern is resolved.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Fuel Injector
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Injector 17113698 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 17113698 Injector is available in the market under the name GM Fuel Injector. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 17113698 Injector fits certain Chevrolet Tahoe, SSR, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT and Buick Rainier models.
The original GM component designated by Manufacturer Part Number 17113698 maintains top performance when functioning as the Injector, Multiport Fuel; Fuel Injector unit. The component 17113698 is constructed from durable material and its dimensions span 4.7 x 1.7 x 1.6 inches while weighing 0.50 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Injector, Fuel Injection. The part 17113698 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.