Make sure this part fits

GM 19371505
Intake Manifold

2004-2012 GM

Customer Questions & Expert Answers (8)
GM 19371505 Intake Manifold
  • Part Description
    Manifold, Engine Fuel Intake Manifold
  • Replaces
    12571079, 92068635
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2005-2008 Buick LaCrosseCXS6 Cyl 3.6 L GAS
    2004-2005 Buick RendezvousCXL, CXL Plus, Ultra6 Cyl 3.6 L GAS
    2004-2009 Cadillac CTSBase6 Cyl 2.8 L GAS, 6 Cyl 3.6 L GAS
    2004-2009 Cadillac SRXBase6 Cyl 3.6 L GAS
    2005-2007 Cadillac STSBase6 Cyl 3.6 L GAS
    2008-2009 Chevrolet EquinoxSport6 Cyl 3.6 L GAS
    2008-2012 Chevrolet MalibuLT, LTZ6 Cyl 3.6 L GAS
    2007-2009 Pontiac G6
    2008-2009 Pontiac G8Base6 Cyl 3.6 L GAS
    2008-2009 Pontiac TorrentGXP6 Cyl 3.6 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 19371505 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 19371505 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the final step in the process for the 2006 Buick LaCrosse? Posted by Customer
    A:
    Install the fuel pressure and EVAP hoses to the engine and the air inlet duct.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    Which wiring harness connectors should be disconnected for the 2005 Buick Rendezvous? Posted by Customer
    A:
    Disconnect the wiring harness connectors from the throttle position (TP) sensor and idle air control (IAC) valve.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    How is the oil filler spout installed for the 2004 Cadillac CTS? Posted by Customer
    A:
    Install the oil filler spout by twisting it clockwise and snapping it in place.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What are the steps for reconnecting the fuel line and EVAP components for the 2007 Cadillac SRX? Posted by Customer
    A:
    Reinstall the fuel line to the retainer at the rear of the right head and connect it to the fuel rail. Install the EVAP purge valve line to the retainer at the rear of the right head, followed by the EVAP purge valve line and electrical connector.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be reconnected after installing the upper intake manifold for the 2007 Cadillac STS? Posted by Customer
    A:
    Reconnect the barometric pressure sensor electrical connector, intake manifold runner control solenoid electrical connector, and PCV hose to the right bank camshaft cover.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What is the torque sequence for the lower intake manifold bolts for the 2009 Chevrolet Equinox? Posted by Customer
    A:
    Clean all lower intake manifold bolts and torque them in sequence: first to 13 Nm (115 lb in), then to 20 Nm (15 lb ft) for bolts (1, 2, 3, 4), and finally to 25 Nm (18 lb ft) for bolts (5, 6, 7, 8).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    Q:
    What should be done after installing the intake manifold for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Reattach the engine wiring harness clips to the intake manifold, position the oil level indicator tube, and install the knock sensor electrical connector clip and the oil level indicator tube bolt, tightening it to 10 N.m (89 lb in).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Intake Manifold
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Intake Manifold 19371505 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19371505 Intake Manifold is available in the market under the name GM Intake Manifold. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19371505 Intake Manifold fits certain Chevrolet Malibu, Equinox models, as well as Cadillac CTS, SRX, STS. Additionally, it is compatible with Buick LaCrosse, Rendezvous and Pontiac G8, G6, Torrent models.
The original GM component designated by Manufacturer Part Number 19371505 maintains top performance when functioning as the Manifold, Engine Fuel Intake Manifold unit. The component 19371505 is constructed from durable material and its dimensions span 7.2 x 7.3 x 15.6 inches while weighing 6.20 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19371505 has available replacement options 12571079, 92068635. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.