Make sure this part fits

GM 19417578
Stabilizer Link, Front

1997-2016 GM

Parts Q&A (10)
19417578 GM Stabilizer Link, Front Illustration 1 of 1
19417578 GM Stabilizer Link, Front Product Photo 1 of 1
  • Part Description
    Link Assembly, Front Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
  • Position
    Front
  • Replaces
    10285683, 10292672, 10403402
  • Manufacturer
    General Motors
Make sure this part fits
$27.29 MSRP: $51.23
You Save: $23.94 (47%)
Ships in 1-2 Business Days
1
ADD TO CART
  • Product Details

    BrandGenuine GM
    Manufacturer Part Number19417578
    Part DescriptionLink Assembly, Front Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link
    Other NamesLink Kit; Link; Link, Stabilizer Shaft
    Item Dimensions6.7 x 2.2 x 1.8 inches
    Item Weight0.80 Pounds
    PositionFront
    ConditionNew
    Fitment TypeDirect Replacement
    Replaces10285683, 10292672, 10403402
    ManufacturerGeneral Motors
    SKU19417578
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Compatible Vehicles

    Year Make Model Trim Engine
    1997-2005 Buick CenturyCustom, Limited, Special Edition6 Cyl 3.1 L GAS
    2005-2009 Buick LaCrosseCX, CXL, CXS, Super6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
    1997-2004 Buick Regal25th Anniversary Edition, GS, GSE, LS, LSE6 Cyl 3.8 L GAS
    2002-2007 Buick RendezvousCX, CX Plus, CXL, CXL Plus, Ultra6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
    2005-2006 Buick TerrazaCX, CXL6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    2000-2013 Chevrolet Impala50th Anniversary Edition, Base, LS, LS Sport, LT, LTZ, Police, SS6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2014-2016 Chevrolet Impala LimitedLS, LT, LTZ, Police6 Cyl 3.6 L FLEX
    2000-2007 Chevrolet Monte CarloLS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
    2005-2006 Chevrolet UplanderBase, LS, LT6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
    1997-2005 Chevrolet VentureBase, LS, LT, Plus, Value, Warner Bros.6 Cyl 3.4 L GAS
    View More
  • Q&A for 19417578

    Q:
    Is this the same part I would get from a dealership? Posted by ChevyPartsDeal Specialist
    A:
    Yes! This is a genuine OEM GM part, identical to the original equipment products available through authorized dealerships. Your order ships directly from an authorized U.S. dealership.
    Posted by ChevyPartsDeal Specialist
    Installation and Repair Tips
    Q:
    What is the final step in the process for the 2005 Buick Century? Posted by Customer
    A:
    Lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be removed from the stabilizer shaft link for the 2007 Buick LaCrosse? Posted by Customer
    A:
    Remove the stabilizer shaft link nut from the stabilizer shaft link and the stabilizer shaft.
    Posted by ChevyPartsDeal Specialist
    Q:
    How do you take out the stabilizer shaft link insulators and the spacer for the 2003 Buick Rendezvous? Posted by Customer
    A:
    Use a pry bar.
    Posted by ChevyPartsDeal Specialist
    Q:
    After removing the nut, what is the next step for the 2001 Buick Regal? Posted by Customer
    A:
    Disconnect the rear stabilizer shaft link from the strut and then remove the stabilizer shaft link.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the first step to replace the stabilizer shaft link in the rear suspension for the 2005 Buick Terraza? Posted by Customer
    A:
    First, raise and support the vehicle.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the first step to replace the stabilizer shaft link in the rear suspension for the 2006 Chevrolet Monte Carlo? Posted by Customer
    A:
    Raise and support the vehicle.
    Posted by ChevyPartsDeal Specialist
    Q:
    What should be removed after raising the 2002 Chevrolet Impala? Posted by Customer
    A:
    The tire and wheel assembly.
    Posted by ChevyPartsDeal Specialist
    Q:
    How do you install the stabilizer link for the 2001 Chevrolet Venture? Posted by Customer
    A:
    Place the stabilizer link into the vehicle, ensuring to adhere to the Fastener Notice in Service Precautions.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the final step after replacing the stabilizer shaft link for the 2006 Chevrolet Uplander? Posted by Customer
    A:
    Finally, lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See Complete Installation and Repair Tips

OEM GM Stabilizer Link, Front 19417578 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19417578 Stabilizer Link, Front is available in the market under the name GM Sway Bar Link. This genuine product has the full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19417578 Stabilizer Link, Front fits certain Chevrolet Impala, Monte Carlo, Uplander models, as well as Buick Regal, LaCrosse, Century. Additionally, it is compatible with Pontiac Grand Prix, Aztek, Montana and Oldsmobile Intrigue, Silhouette models. Please select your vehicle to confirm that the component is the right fit before ordering.
The original GM component designated by Manufacturer Part Number 19417578 maintains top performance when functioning as the Link Assembly, Front Stabilizer Shaft; Suspension Stabilizer Bar Link Kit; Stabilizer Bar Link Kit; Sway Bar Link unit at its Front. The component 19417578 is constructed from durable material and its dimensions span 6.7 x 2.2 x 1.8 inches while weighing 0.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Link Kit; Link; Link, Stabilizer Shaft. The part 19417578 has available replacement options 10285683, 10292672, 10403402. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.