Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 19257047
Knuckle, Passenger Side

1999-2007 GM

Customer Questions & Expert Answers (13)
GM 19257047 Knuckle, Passenger Side
GM 19257047 Knuckle, Passenger Side
GM 19257047 Knuckle, Passenger Side
  • Part Description
    Knuckle, Steering
  • Position
    Passenger Side
  • Replaces
    18048229, 18060556
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 19257047 Knuckle, Passenger Side is Ref No. 1 in the diagram below

    2007 Chevy Silverado 1500 Knuckle, Passenger Side Diagram for 19257047
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 19257047

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2005 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    1999-2007 Chevrolet Silverado 1500Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, SS, WT6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2005-2006, 2001-2003 Chevrolet Silverado 1500 HDBase, LS, LT8 Cyl 6.0 L GAS
    2007 Chevrolet Silverado 1500 HD ClassicLT8 Cyl 6.0 L GAS
    2000-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2000-2006 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 19257047 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 19257047 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    What is the first step to service and repair the steering knuckle in a torsion bar suspension system for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Raise and support the vehicle, then remove the tire and wheel.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What should be installed after the new steering knuckle for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Install the upper ball joint and lower ball joint.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What is the torque specification for the brake hose bracket retaining bolt for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Tighten it to 9 Nm (80 inch lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What should be removed after the tire and wheel for the 2005 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Next, remove the wheel hub and bearing, followed by the upper ball joint and lower ball joint.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What should be disconnected from the knuckle for the 2000 Chevrolet Suburban 1500? Posted by Customer
    A:
    Disconnect the outer tie rod from the knuckle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What should be installed after the lower ball joint for the 2007 Chevrolet Silverado 1500? Posted by Customer
    A:
    Install the upper ball joint and the outer tie rod end.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What should be done after reassembling for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Remove the lower control arm support, lower the vehicle, and align it.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What should be done after installing the park brake cable retaining bolt for the 2005 Chevrolet Tahoe? Posted by Customer
    A:
    Install the wheel hub and bearing, then the outer tie rod retaining nut, tightening it to 55 Nm (40 ft. lbs.), followed by the outer tie rod retaining bracket tightened to 65 Nm (48 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    How do you support the lower control arm for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Use a suitable jack to support the lower control arm.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What needs to be disconnected from the steering knuckle for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Disconnect the outer tie rod from the steering knuckle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What is the next step after disconnecting the ESC link rod and outer tie rod for the 2004 GMC Yukon? Posted by Customer
    A:
    Remove the brake hose bracket retaining bolt from the knuckle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    Q:
    What is the procedure for connecting the upper ball joint for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Connect the upper ball joint to the steering knuckle and install the retaining nut, tightening it to 50 Nm (37 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Steering Knuckle
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Knuckle, Passenger Side 19257047 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 19257047 Knuckle, Passenger Side is available in the market under the name GM Steering Knuckle. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 19257047 Knuckle, Passenger Side fits certain Chevrolet Tahoe, Silverado 1500, Suburban 1500 models, as well as GMC Sierra 1500, Yukon, Yukon XL 1500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 19257047 maintains top performance when functioning as the Knuckle, Steering unit at its Passenger Side. The component 19257047 is constructed from durable material and its dimensions span 16.7 x 16.4 x 6.9 inches while weighing 17.80 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 19257047 has available replacement options 18048229, 18060556. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.