Make sure this part fits

GM 12560967
Camshaft

1999-2007 GM

Customer Questions & Expert Answers (11)
GM 12560967 Camshaft
GM 12560967 Camshaft
  • Part Description
    Camshaft, Engine
  • Manufacturer
    General Motors
Make sure this part fits
$495.61 MSRP: $816.41
You Save: $320.80 (40%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Vehicle Fitment

    Year Make Model Trim Engine
    2004 Buick RainierCXL, CXL Plus8 Cyl 5.3 L GAS
    2003-2007 Chevrolet Express 2500Base, LS, LT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L GAS
    2003-2007 Chevrolet Express 3500Base, LS8 Cyl 4.8 L GAS
    2003-2004 Chevrolet SSRBase8 Cyl 5.3 L GAS
    2000-2006 Chevrolet Silverado 1500Base, Hybrid, LS, LT, WT, Z71 Off-Road8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS
    2007 Chevrolet Silverado 1500 ClassicHybrid, LS, LT, WT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS
    1999-2000 Chevrolet Silverado 2500Base, LS, LT8 Cyl 6.0 L GAS
    2000 Chevrolet Suburban 2500Base, LS, LT8 Cyl 6.0 L GAS
    2003-2004 Chevrolet Trailblazer EXTLS, LT, North Face8 Cyl 5.3 L GAS
    2003-2004 GMC Envoy XLSLE, SLT8 Cyl 5.3 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is this 12560967 designed for my car? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 12560967 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    How should the camshaft journals and lobes be prepared for installation for the 2004 Buick Rainier? Posted by Customer
    A:
    Coat them with clean engine oil.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What is the torque specification for the camshaft retainer bolts for the 2006 Chevrolet Express 2500? Posted by Customer
    A:
    Tighten them to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What should be done if the O-ring seal is intact for the 2005 Chevrolet Express 3500? Posted by Customer
    A:
    Lubricate it with clean engine oil and install the camshaft sensor and bolt, tightening to 25 Nm (18 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What should be done after removing the camshaft for the 2004 Chevrolet Silverado 1500? Posted by Customer
    A:
    Clean and inspect the camshaft or bearings as necessary.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What is the torque specification for the camshaft retainer bolts for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Tighten them to 12 Nm (106 inch lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    How should the camshaft be removed for the 2003 Chevrolet SSR? Posted by Customer
    A:
    Install three M8-1.25 x 100 mm bolts into the front bolt holes of the camshaft, using them as a handle to carefully rotate and pull the camshaft out of the engine block, then remove the bolts.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What is the first step to replace the camshaft for the 2005 GMC Savana 2500? Posted by Customer
    A:
    Remove the radiator support, engine front cover, and valve lifters.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What is the procedure for installing the camshaft back into the engine block for the 2006 GMC Savana 3500? Posted by Customer
    A:
    Use the same three bolts to carefully install the camshaft and then remove the bolts afterward.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What is the next step after installing the camshaft retainer for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Install the camshaft sprocket and position the timing chain, followed by the installation of the camshaft sprocket bolts, which should be tightened to 35 Nm (26 ft. lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    Q:
    What should be done after removing the camshaft for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Clean and inspect the camshaft or bearings as needed.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Camshaft 12560967 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 12560967 Camshaft is available in the market under the name GM Camshaft. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 12560967 Camshaft fits certain Chevrolet SSR, Silverado 1500, Express 2500 models, as well as GMC Sierra 1500, Envoy XL, Envoy XUV. Additionally, it is compatible with Buick Rainier models.
The original GM component designated by Manufacturer Part Number 12560967 maintains top performance when functioning as the Camshaft, Engine unit. The component 12560967 is constructed from durable material and its dimensions span 3.4 x 3.4 x 29.2 inches while weighing 10.00 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 12560967 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.