Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 9436881
Wheel Bearing

1984-2019 GM

Customer Questions & Expert Answers (28)
GM 9436881 Wheel Bearing
GM 9436881 Wheel Bearing
GM 9436881 Wheel Bearing
  • Part Description
    Bearing, Differential; Differential Pinion Bearing; Differential Bearing
  • Manufacturer
    General Motors
Make sure this part fits
$57.71 MSRP: $145.36
You Save: $87.65 (61%)
Ships in 1-3 Business Days
1
ADD TO CART

  • 9436881 Wheel Bearing is Ref No. 3 in the diagram below

    1994 Chevy K1500 Suburban Wheel Bearing Diagram for 9436881
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 9436881

  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006, 1999-2000 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    1987-1994 Chevrolet BlazerBase, Cheyenne, Custom Deluxe, Scottsdale, Silverado, Silverado Sport8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL
    1984-1986 Chevrolet C10Custom, Scottsdale, Silverado6 Cyl 4.1 L GAS, 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
    1984-1986 Chevrolet C10 SuburbanCustom, Scottsdale, Silverado8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL
    1988-1999 Chevrolet C1500454 SS, Base, Cheyenne, LS, Scottsdale, Silverado, WT6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.2 L DIESEL, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
    1992-1999 Chevrolet C1500 SuburbanBase, LS, LT, Silverado8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
    View More
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Hey, is 9436881 a good match for my vehicle? Posted by ChevyPartsDeal Specialist
    A:
    Please Select Your Vehicle model to see if part number 9436881 is suitable before ordering.
    Posted by ChevyPartsDeal Specialist
    Q:
    How do you remove the bearing for the 8.6 inch axle for the 2003 Cadillac Escalade? Posted by Customer
    A:
    Use the J45871 around the pinion bearing and the J22912-01 in an inverted position around the J45871 to press the bearing off.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you install the inner and outer pinion bearing cups for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    Install the inner pinion bearing cup with the Pinion Bearing Installer (J 37624) and Universal Driver Handle - 3/4 in - 10 (J 8092), followed by the outer pinion bearing cup using the Rear Pinion Bearing Installer (J 8608) and Universal Driver Handle - 3/4 in - 10 (J 8092).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What shim should be installed if the original shim is unavailable for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    A 0.41 mm (0.016 inch) shim.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the final step for the wheel drive shaft assembly for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Install the nut and washer retaining the wheel drive shaft assembly to the wheel hub and bearing, tightening the nut to 240 N.m (177 lb ft).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How do you install the inner and outer pinion bearing cups for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Install the inner pinion bearing cup with the Pinion Bearing Installer (J 37624) and Universal Driver Handle - 3/4 in - 10 (J 8092), followed by the outer pinion bearing cup using the Rear Pinion Bearing Installer (J 8608) and Universal Driver Handle - 3/4 in - 10 (J 8092).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What are the final steps after installing the bearings for the 2006 Chevrolet Express 1500? Posted by Customer
    A:
    Reinstall the differential assembly, fill the axle with the appropriate lubricant, and lower the vehicle.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you install the inner pinion bearing cup for the 2008 Chevrolet Express 2500? Posted by Customer
    A:
    Use the Pinion Bearing Cup Installer (J 45870) along with the Universal Driver Handle (J 8092).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the procedure for installing the outer wheel bearing and cup for the 2000 Chevrolet K3500? Posted by Customer
    A:
    Install the outer wheel bearing and outer bearing cup, then drive the bearing cup into the wheel hub using the J 45364 and J 8092.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How do you install the axle shaft seal for the 3.6-inch axle for the 2004 Chevrolet Express 3500? Posted by Customer
    A:
    Use the Axle Pinion Oil Seal Installer (J21128), ensuring the seal is fully seated in the axle tube.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How is the inner pinion bearing installed for the 2009 Chevrolet Silverado 1500? Posted by Customer
    A:
    Use the J 24433 (Pinion Bearing Installer) and a hydraulic press.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after tightening the drive shaft assembly for the 2004 Chevrolet Silverado 2500? Posted by Customer
    A:
    Install the wheel speed sensor and brake hose mounting bracket bolt to the steering knuckle, tightening the brake hose clip bolt to 12 Nm (106 inch lbs.).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How is the pinion oil seal installed for the 2004 Chevrolet Tahoe? Posted by Customer
    A:
    Use the J 22388.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the first step in the process for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Begin by raising the vehicle and removing the differential assembly.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What tools are required to replace the drive pinion bearings on a 9.75 Inch Axle for the 2004 Chevrolet Silverado 3500? Posted by Customer
    A:
    The required tools are: J 22536 Pinion Driver, J 22912-01 Split-Plate Bearing Puller, J 42176 Universal Driver Handle - Non-Threaded, J 45703 Pinion Bearing Race Remover - Dana 248, J 45704 Pinion Bearing Race Installer - Dana 248, J 45705 Pinion Bearing Race Remover - Dana 248/267, J 7818 Inner Bearing Race Installer, and J 8092 Universal Drive Handle - ¾ in - 10.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you remove the axle shaft for the 2001 Chevrolet Suburban 1500? Posted by Customer
    A:
    Remove the axle shaft, then use the J 44685 (8.6 inch axle) and J 2619-01 to extract the axle shaft seal and bearing from the axle housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the next step after installing the inner pinion bearing for the 2007 Chevrolet Silverado 3500 Classic? Posted by Customer
    A:
    Install a new collapsible spacer and lubricate the pinion bearings.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    Which tools are used to install the drive pinion pilot gear bearing for the 2010 GMC Savana 1500? Posted by Customer
    A:
    The J 22761 installer and J 8092 driver.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What tool is used to press the bearing off the drive pinion for the 2006 GMC Savana 2500? Posted by Customer
    A:
    Use the Split-Plate Bearing Puller (J22912-01).
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What should be done after adjusting the wheel bearings for the 2000 GMC C3500? Posted by Customer
    A:
    Install the cotter pin and replace the retainer/cap.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How do you determine the selective shim thickness for the drive pinion for the 2008 GMC Sierra 1500? Posted by Customer
    A:
    Determine the selective shim thickness and install it between the inner pinion bearing and the shoulder on the gear.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you install the inner pinion bearing for the 2007 GMC Sierra 3500 Classic? Posted by Customer
    A:
    Use the appropriate installer (J 24433, J 36614, or J 44412) to install the inner pinion bearing, pressing it on until the cone seats on the pinion shim.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the next step after installing the inner pinion bearing for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Install a new collapsible spacer and lubricate the pinion bearings.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    What is the procedure for installation for the 2000 GMC Savana 3500? Posted by Customer
    A:
    Ensure all parts are clean and grease the spindle at the inner and outer bearing seat, shoulder, and seal seat with approved high-temperature front wheel bearing grease.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    What is the first step to service and repair the wheel bearing with rear wheel steering for the 2005 GMC Sierra 3500? Posted by Customer
    A:
    Begin by raising the vehicle using appropriate lifting techniques.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How do you remove the pinion for the 2004 GMC Yukon? Posted by Customer
    A:
    Install the J 22536 Pinion Driver, ensuring it is firmly seated on the pinion, and drive the pinion out using the J 22536 and a hammer, taking care not to let the pinion fall out of the rear axle housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    Q:
    How do you remove the axle shaft for the 2001 GMC Yukon XL 1500? Posted by Customer
    A:
    Remove the axle shaft, then use the J 44685 (8.6 inch axle) and J 2619-01 to extract the axle shaft seal and bearing from the axle housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Wheel Bearing
    Q:
    How do you remove the pinion for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Install the J 22536 Pinion Driver, ensuring it is firmly seated on the pinion, and drive the pinion out using the J 22536 and a hammer, taking care not to let the pinion fall out of the rear axle housing.
    Posted by ChevyPartsDeal Specialist
    See vehicle specific detailed answers for this Pinion Bearing
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Wheel Bearing 9436881 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 9436881 Wheel Bearing is available in the market under the name GM Pinion Bearing, Wheel Bearing, Differential Bearing. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 9436881 Wheel Bearing fits certain Chevrolet C10, Tahoe, Silverado 1500 models, as well as GMC Sierra 1500, Yukon, Sierra 2500 HD. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by Manufacturer Part Number 9436881 maintains top performance when functioning as the Bearing, Differential; Differential Pinion Bearing; Differential Bearing unit. The component 9436881 is constructed from durable material and its dimensions span 5.1 x 1.5 x 5.0 inches while weighing 1.70 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Axle Bearings; Shaft; Inner; Side; Differential Gear; Front Wheel; Rear Wheel; Nut.. The part 9436881 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts? Our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.