How to Inspect and Maintain Brake Components, Including Pads and Brake Booster on Saturn Vue?

In addition to the specified intervals, the brakes should be inspected every time the wheels are removed or whenever a defect is suspected. Symptoms indicating a potential brake system defect include the vehicle pulling to one side when the brake pedal is depressed, squealing or dragging noises when the brakes are applied, excessive brake pedal travel, pulsating of the pedal, or brake fluid leaks, typically onto the inside of the tire or wheel. Begin by loosening the wheel lug nuts, then raise the vehicle and place it securely on jack stands before removing the wheels. Each caliper contains two pads (an outer and an inner), which are visible with the wheels removed. Check the pad thickness by looking at each end of the caliper and through the inspection window in the caliper body; if the lining material is less than the specified thickness, replace the pads. If it is difficult to determine the exact thickness, remove the caliper(s) and pads for further inspection. Clean the pads with brake cleaner and re-measure them, then measure the disc thickness with a micrometer to ensure it has service life remaining; replace any disc thinner than the specified minimum thickness and check for scoring, gouging, or burned spots. Before installing the wheels, inspect all brake lines and hoses for damage, wear, or leakage, and ensure they are clear of sharp edges and moving parts. All models have rear drum brakes; with the rear wheels removed, ensure the parking brake is off and tap on the outside of the brake drums to loosen them before removing the drums. Clean the brake assemblies and note the thickness of the lining material on both front and rear shoes; if any lining is thinner than specified, replace all brake shoes, especially if they are cracked or soaked with brake fluid. Ensure all brake springs are connected and in good condition, check the wheel cylinders for fluid leakage, and inspect hoses and connections for signs of leakage. Wipe the inside of the brake drums with a clean rag and check for score marks or deep scratches; if imperfections cannot be removed, the drum must be machined. If all parts are in good condition, install the drums, wheels, and lower the vehicle. To check the brake booster, sit in the driver's seat and perform a series of tests: with the brake fully depressed, start the engine and observe if the pedal moves down slightly; with the engine running, depress the brake pedal several times to ensure the travel distance does not change; then, with the engine off, hold the pedal for about 30 seconds to check for sinking or rising. Restart the engine, run it for about a minute, and turn it off, then firmly depress the brake several times to see if the pedal travel decreases with each application; if not, the brake booster has failed. For the parking brake, park the vehicle on a steep hill with the parking brake set and the transmission in Neutral; if the parking brake cannot prevent the vehicle from rolling, it requires attention.

OEM Saturn Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Brake Boosters found

View related parts
Saturn Brake Booster Part Number: 20996840
$156.64 MSRP: $303.97
You Save: $147.33 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Power Brake; Power Booster; Booster; Booster, Hydraulic Power Brake Booster
- Replaces: 25847530
Fits the following Saturn Models:
- Vue | 2009 | Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Saturn Brake Booster Part Number: 19418519
$493.40 MSRP: $966.02
You Save: $472.62 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Power Booster
- Replaced by: 19432799
Fits the following Saturn Models:
- Outlook | 2007-2009 | XE, XR | 6 Cyl 3.6 L GAS
View related parts
Saturn Brake Booster Part Number: 84635614
$129.44 MSRP: $234.28
You Save: $104.84 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Power Booster
- Replaced by: 19432798
Fits the following Saturn Models:
- Outlook | 2010 | XE, XR | 6 Cyl 3.6 L GAS
View related parts
Saturn Brake Booster Part Number: 25878055
$136.56 MSRP: $256.46
You Save: $119.90 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Power Brake; Booster; Booster, Hydraulic Power Brake Booster
Fits the following Saturn Models:
- Aura | 2008-2009 | Green Line, XE, XR | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Saturn Brake Booster Part Number: 15835854
$297.91 MSRP: $578.18
You Save: $280.27 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Power Brake; Power Booster; Booster, Hydraulic Power Brake Booster
Fits the following Saturn Models:
- Vue | 2008-2010 | Green Line, Hybrid, Red Line, XE, XR | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Saturn Brake Booster Part Number: 15214486
$231.57 MSRP: $434.89
You Save: $203.32 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Power Booster
- Replaces: 22698038
Fits the following Saturn Models:
- Vue | 2002-2007 | Base, Green Line, Red Line | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.5 L GAS
View related parts
Saturn Brake Booster Part Number: 21010181
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Power Booster
Fits the following Saturn Models:
- SC | 1991-1992 | Base | 4 Cyl 1.9 L GAS
- SC1 | 1993-1999 | Base | 4 Cyl 1.9 L GAS
- SC2 | 1993-1999 | Base | 4 Cyl 1.9 L GAS
- SL | 1991-1999 | Base | 4 Cyl 1.9 L GAS
- SL1 | 1991-1999 | Base | 4 Cyl 1.9 L GAS
- SL2 | 1991-1999 | Base | 4 Cyl 1.9 L GAS
- SW1 | 1993-1999 | Base | 4 Cyl 1.9 L GAS
- SW2 | 1993-1999 | Base | 4 Cyl 1.9 L GAS
View More
View related parts
Saturn Booster Part Number: 19208178
Product Specifications
- Other Name: Booster Assembly, Power Brake (Remanufacture); Brake Booster
Fits the following Saturn Models:
- Aura | 2007 | XE, XR | 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Saturn Brake Booster Part Number: 19208154
Product Specifications
- Other Name: Booster Assembly, Power Brake (Remanufacture); Booster
Fits the following Saturn Models:
- Aura | 2007-2008 | Green Line, XE, XR | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Saturn Brake Booster Part Number: 93189714
Product Specifications
- Other Name: Booster, Power Brake; Power Booster; Booster, Hydraulic Power Brake Booster
Fits the following Saturn Models:
- Astra | 2008-2009 | XE, XR | 4 Cyl 1.8 L GAS
View related parts
Saturn Brake Booster Part Number: 25878056
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Power Booster; Booster
Fits the following Saturn Models:
- Aura | 2009 | Hybrid | 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV)
View related parts
Saturn Brake Booster Part Number: 22707256
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Booster Assembly
Fits the following Saturn Models:
- L100 | 2001-2002 | Base | 4 Cyl 2.2 L GAS
- L200 | 2001-2003 | Base | 4 Cyl 2.2 L GAS
- L300 | 2001-2005 | 1, 2, 3, Base | 4 Cyl 2.2 L GAS, 6 Cyl 3.0 L GAS
- LS | 2000 | Base | 4 Cyl 2.2 L GAS
- LS1 | 2000 | Base | 4 Cyl 2.2 L GAS
- LS2 | 2000 | Base | 6 Cyl 3.0 L GAS
- LW1 | 2000 | Base | 4 Cyl 2.2 L GAS
- LW2 | 2000 | Base | 6 Cyl 3.0 L GAS
- LW200 | 2001-2003 | Base | 4 Cyl 2.2 L GAS
- LW300 | 2001-2003 | Base | 6 Cyl 3.0 L GAS
View More
View related parts
Saturn Brake Booster Part Number: 21013196
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Power Booster; Booster Assembly
Fits the following Saturn Models:
- SC1 | 2000-2002 | Base | 4 Cyl 1.9 L GAS
- SC2 | 2000-2002 | Base | 4 Cyl 1.9 L GAS
- SL | 2000-2002 | Base | 4 Cyl 1.9 L GAS
- SL1 | 2000-2002 | Base | 4 Cyl 1.9 L GAS
- SL2 | 2000-2002 | Base | 4 Cyl 1.9 L GAS
- SW2 | 2000-2001 | Base | 4 Cyl 1.9 L GAS
View More
View related parts
Saturn Brake Booster Part Number: 15271723
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Power Booster
Fits the following Saturn Models:
- Sky | 2007-2010 | Base, Red Line | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
Saturn Brake Booster Part Number: 15234621
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Booster Assembly
- Replaces: 15189237
Fits the following Saturn Models:
- Relay | 2005-2007 | 1, 2, 3 | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Saturn Brake Booster Part Number: 15212016
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Booster
Fits the following Saturn Models:
- Ion | 2003-2007 | 1, 2, 3, Red Line | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS

Saturn Brake Booster

Choose OEM Brake Booster, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Saturn's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Saturn Brake Booster. You can shop at highly competitive prices and protect your budget. All our genuine Saturn parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

The Saturn Brake Booster magnifies the force of the pedal, making the act of stopping light and fast each time. Saturn has also established its reputation based on such ingenious concepts as dent-resistant panels and accurate lost foam cast engines that reduced weight, retained rust resistance, and enabled ordinary drivers to have confidence in their cars. Saturn was not like many of its badges that reused old components but created its own factory and culture, demanded cleaner processes of paint that kept shine on the car during winters, and talked honestly to its customers who cared about solid bodies rather than chrome ornamentation, building customer loyalty through high integrity in design choices. Saturn is practical and no-frills in its delivery and welcomes anybody to board the ship and drive instead of being impressed by marketing rhetoric, and that low-brow ethos informs the manner in which the brand tackled all the parts of the chassis that need to be addressed, such as engines and braking systems. Within that line of thinking, the Brake Booster works by taking engine vacuum, pushing it against a diaphragm, ramping hydraulic pressure, and transforming a simple foot press into hard-cutting clamp force at the calipers. The vacuum supply can be low, and then hydraulic style Brake Booster steps in, supplying power steering pressure which provides the same certain pedal sensation on steep ascents. Normal driving can hardly be considered a serious load on the Brake Booster, but the sealed chambers always have enough reserve to halt hard deceleration in sudden traffic. Drivers who want to pursue an even faster response can change to a performance unit or install a power conversion kit that fuss-free tightens bite.

Saturn Brake Booster Parts and Q&A

Brake Booster
15214486
Q: How to Inspect and Maintain Brake Components, Including Pads and Brake Booster on Saturn Vue?
A:
In addition to the specified intervals, the brakes should be inspected every time the wheels are removed or whenever a defect is suspected. Symptoms indicating a potential brake system defect include the vehicle pulling to one side when the brake pedal is depressed, squealing or dragging noises when the brakes are applied, excessive brake pedal travel, pulsating of the pedal, or brake fluid leaks, typically onto the inside of the tire or wheel. Begin by loosening the wheel lug nuts, then raise the vehicle and place it securely on jack stands before removing the wheels. Each caliper contains two pads (an outer and an inner), which are visible with the wheels removed. Check the pad thickness by looking at each end of the caliper and through the inspection window in the caliper body; if the lining material is less than the specified thickness, replace the pads. If it is difficult to determine the exact thickness, remove the caliper(s) and pads for further inspection. Clean the pads with brake cleaner and re-measure them, then measure the disc thickness with a micrometer to ensure it has service life remaining; replace any disc thinner than the specified minimum thickness and check for scoring, gouging, or burned spots. Before installing the wheels, inspect all brake lines and hoses for damage, wear, or leakage, and ensure they are clear of sharp edges and moving parts. All models have rear drum brakes; with the rear wheels removed, ensure the parking brake is off and tap on the outside of the brake drums to loosen them before removing the drums. Clean the brake assemblies and note the thickness of the lining material on both front and rear shoes; if any lining is thinner than specified, replace all brake shoes, especially if they are cracked or soaked with brake fluid. Ensure all brake springs are connected and in good condition, check the wheel cylinders for fluid leakage, and inspect hoses and connections for signs of leakage. Wipe the inside of the brake drums with a clean rag and check for score marks or deep scratches; if imperfections cannot be removed, the drum must be machined. If all parts are in good condition, install the drums, wheels, and lower the vehicle. To check the brake booster, sit in the driver's seat and perform a series of tests: with the brake fully depressed, start the engine and observe if the pedal moves down slightly; with the engine running, depress the brake pedal several times to ensure the travel distance does not change; then, with the engine off, hold the pedal for about 30 seconds to check for sinking or rising. Restart the engine, run it for about a minute, and turn it off, then firmly depress the brake several times to see if the pedal travel decreases with each application; if not, the brake booster has failed. For the parking brake, park the vehicle on a steep hill with the parking brake set and the transmission in Neutral; if the parking brake cannot prevent the vehicle from rolling, it requires attention.