Choose OEM Wiper Switch, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Pontiac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Pontiac Wiper Switch. You can shop at highly competitive prices and protect your budget. All our genuine Pontiac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
The Pontiac Wiper Switch is the steering stick allowing drivers to select between mist, intermittent, low, high, or wash to ensure the windshield remains clear and vision is not blurred. Pontiac was a creation of the 1920s racing grit, which developed a reputation for track steadiness, putting the tires on and making corners like sticking to the tracks. Each Pontiac cockpit places the seat, shifter, and gauges in the center of the cockpit so that the information and controls are right where the hands and eyes are supposed to be, and even the lowly Wiper Switch gets back with a sharp clicking noise that seems mechanical and sure. Aggressive body lines are also functional, which reduce the center of gravity, thus ensuring that the car remains flat when you pitch against an off ramp, and the updated electronics provide continuous power supply to lights, audio, and other components without fading or slowing. The philosophy makes Pontiac drivers continue smiling over the fact that power, balance, and feedback always remain the same regardless of the road. It is easy to replace the Wiper Switch, and to do it correctly one needs to disconnect the battery to prevent sparks, then the steering column shroud using the screwdriver to reveal the switch. Disconnect the wiring connector, loosen the two locking screws, and slide out the old unit. Install the new Wiper Switch, then screw the screws tight and snap the harness until it clips, and then re-insert the wires into their channels. Install the shroud again, reattach the battery, and go through each setting and see the blades glide around with washer spray on command.