Choose OEM Trunk Lock Cylinder, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Pontiac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Pontiac Trunk Lock Cylinder. You can shop at highly competitive prices and protect your budget. All our genuine Pontiac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
The keyed barrel of the decklid connected to a latch is referred to as a Pontiac Trunk Lock Cylinder and allows the driver to lock or unlock the trunk easily. Each Pontiac got its stripes by combining broad-track attitude, quick steering, and performance-oriented engines that were pleading to be put on open pavement. Corners are flat due to the low center of gravity. The ownership of a Pontiac is about belonging to the road prior to the engine cracking. Cockpits lean forward towards the driver, and instruments are illuminated in red, and the controls are right in your hand, and you find yourself driving at night as a matter of muscle memory. Even base models received some suspension tuning that did not turn the ride into jello when hitting potholes. The exterior lines are sharp, aggressive, but still intentional, directing air to cool the brakes and keep the rear down in speed. Sound systems in factories blast the gears on, and optional heads-up displays keep the eyes on the road, which proves that excitement had not lost control. In order to replace a Trunk Lock Cylinder, you need to unscrew the negative battery cable and lift the decklid. Unzip the carpet panel, unlock the latch, and unscrew plastic retainers using a trim tool. Pry open the linkage rod, push out the horseshoe clip, squeeze out the old core in the sheet metal. Install a new Trunk Lock Cylinder, position it on the outside, make sure that the tang fits into the latch arm, and then snap the rod back, tighten the clip, and test key action. Mostly feel the fresh Trunk Lock Cylinder turn freely. Install a final finishing trim and check your Pontiac trunk seals.