Choose OEM Hood Latch, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Pontiac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Pontiac Hood Latch. You can shop at highly competitive prices and protect your budget. All our genuine Pontiac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
The Pontiac Hood Latch is the easy yet important catch-and-release clamp that will hold the hood closed at high speed and only crack it open when you desire it. All Pontiacs are street fighters who have been raised on broad highways and street-light races. The position is low and aggressive and provides you with confident handling via sharp turns. Turning with a hand, not with sweet electronic whispers but with true road feel, you never fail to sense the point of attack of the front wheels. Power is instant and the revs scramble up with a hearty roar that leaves you smiling even at the grocery store. Gauges are tilted towards the driver on the inside such that your information falls in the direction of sight and not distractions. Chairs embrace your ribs without constricting, suited to the long highway run or the short speed push. A Pontiac layers smartphone-friendly tech over the top of that raw attitude, allowing you to play your tunes and the traction to remain in check. It is necessary to disconnect the battery when changing the Pontiac Hood Latch in a level area. Open the hood, remove grille trim, and unbolt the worn-out unit keeping track of striker and cable location. Install the new Hood Latch into the factory holes, then finger tighten, then screw tight and do not shake anything loose. Plug the release cable into the groove and stick a bit of grease and run the lever by hand. Bend the striker until the Hood Latch snaps into position and the panel snaps into place. Reconnect the battery, close the hood, and have your Pontiac clicking with a sense of authority.