What is the method for measuring and adjusting Drive Belt tension on Pontiac Fiero?

Check the tension of each belt by pushing on it at a distance halfway between the pulleys. Push firmly with your thumb and measure this deflection with a ruler. The belt should deflect 114-inch if the distance from pulley center to pulley center is between 7 and 11 inches. The belt should deflect 112:inch if the distance from pulley center to pulley center is between 12 and 16 inches. Another, more precise method of measuring and adjusting belt deflection is accomplished with special belt tension tools which are available from General Motors (J-23600-B or BT 33-95-ACBN). These tools measure the amount of force required to deflect a belt a specified distance. To adjust belt tension, loosen the pivot bolt(s) securing the belt-driven component to the engine block and the retaining nut or bolt securing the component to the slotted adjustment bracket. Use a levering device, such as a large screwdriver or pry bar, to pivot the component until the specified tension is achieved. Be careful not to damage either the component or the engine. Tighten the retaining nut or bolt securing the component to its slotted adjustment bracket snug enough to hold it. Check the belt tension again. Adjust as necessary. Tighten the component securely. If inspection reveals that a belt must be replaced, loosen the pivot bolt of the appropriate accessory (alternator, air conditioning compressor, etc.), slip the old belt off the crankshaft pulley and accessory pulley, then lift it out. Before installing the new belt, make sure it's the same width and length as the old one. Once the new belt is in place, tighten and adjust it just like you would a used belt.

OEM Pontiac Drive Belt

Serpentine Belt

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

110 Drive Belts found

View related parts
Pontiac Serpentine Belt Part Number: 12634319
$23.30 MSRP: $42.17
You Save: $18.87 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
- Replaces: 12618358, 24435940, 24466972
Fits the following Pontiac Models:
- G5 | 2007-2009 | Base, GT | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
- Grand Am | 2002-2005 | SE, SE1 | 4 Cyl 2.2 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 92248982
$25.76 MSRP: $46.00
You Save: $20.24 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Water Pump & A/C Compressor & Generator & Power Steering Pump; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt, Drive
- Replaces: 92068267, 92241372
Fits the following Pontiac Models:
- G8 | 2008-2009 | Base | 6 Cyl 3.6 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 12578274
$38.90 MSRP: $69.48
You Save: $30.58 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
Fits the following Pontiac Models:
- Montana | 2006 | SV6 | 6 Cyl 3.9 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 12596249
$55.17 MSRP: $98.52
You Save: $43.35 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
Fits the following Pontiac Models:
- Grand Prix | 2005-2008 | GXP | 8 Cyl 5.3 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 12576750
$62.47 MSRP: $111.58
You Save: $49.11 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
- Replaces: 12563072, 12596340, 12574093
Fits the following Pontiac Models:
- Grand Prix | 2004-2008 | Base, GT, GT1, GT2, GTP | 6 Cyl 3.8 L GAS
- Torrent | 2006-2009 | Base | 6 Cyl 3.4 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 88984192
$3.62 MSRP: $6.45
You Save: $2.83 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Water Pump, A/C Compressor, Generator, Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt.; Belt, Drive
- Replaces: 12569536, 24577363, 24576765
Fits the following Pontiac Models:
- Sunfire | 1998-2002 | GT, SE | 4 Cyl 2.2 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 88971576
$37.04 MSRP: $66.12
You Save: $29.08 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Water Pump, A/C Compressor, Generator, Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt.; Belt, Drive
Fits the following Pontiac Models:
- Vibe | 2003-2008 | Base | 4 Cyl 1.8 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 19355282
$39.35 MSRP: $70.26
You Save: $30.91 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Water Pump & A/C Compressor & Generator & Power Steering Pump; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt; Belt, Drive
- Replaces: 12588413, 12569591, 24505853, 24507294
Fits the following Pontiac Models:
- Bonneville | 2000-2005 | SE, SLE, SSEi | 6 Cyl 3.8 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 12591059
$39.38 MSRP: $70.30
You Save: $30.92 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt-Water Pump & A/C Compressor & Generator; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, Drive
- Replaces: 12583316
Fits the following Pontiac Models:
- G6 | 2005-2006 | Base, GT | 6 Cyl 3.5 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 12577771
$41.40 MSRP: $73.92
You Save: $32.52 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt
Fits the following Pontiac Models:
- G6 | 2006-2010 | Base, GT, GTP | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 12588412
$17.91 MSRP: $29.47
You Save: $11.56 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Water Pump; Serpentine Belt Drive Kit; Accessory Drive Belt; Water Pump Belt; Serpentine Tensioner; Belt, Drive
- Replaces: 03545016, 12555957, 12570499, 3545016
Fits the following Pontiac Models:
- Bonneville | 2004-2005 | GXP | 8 Cyl 4.6 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 19172681
$18.40 MSRP: $30.27
You Save: $11.87 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, A/C Compressor; Serpentine Belt Drive Kit; Drive Belt; V-Belt; A/C Belt; Belt, Drive
- Replaces: 12559327, 12569529
Fits the following Pontiac Models:
- Firebird | 1998-2002 | Formula, Trans Am | 8 Cyl 5.7 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 19244956
$29.09 MSRP: $33.02
You Save: $3.93 (12%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Generator & A/C Compressor & Power Steering Pump; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt; Belt, Drive
- Replaces: 12550149, 88986810
Fits the following Pontiac Models:
- Firebird | 1995-1997 | Formula, Trans Am | 8 Cyl 5.7 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 88984195
$18.86 MSRP: $26.33
You Save: $7.47 (29%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Generator & A/C Compressor; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Alternator Belt; A/C Belt; Belt, Drive
- Replaces: 12569539, 24573205, 24575751, 24573206, 24575537, 24576787
Fits the following Pontiac Models:
- Grand Am | 1992-2001 | GT, SE, SE1, SE2 | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
- Sunfire | 1995-2002 | GT, SE | 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 12588408
$41.39 MSRP: $56.60
You Save: $15.21 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Drive Belt; V-Belt
- Replaces: 12569376, 24508562
Fits the following Pontiac Models:
- Aztek | 2001-2005 | Base, GT, Rally | 6 Cyl 3.4 L GAS
- Grand Am | 1999-2005 | GT, GT1, SE, SE1, SE2 | 6 Cyl 3.4 L GAS
- Montana | 2001-2005 | Base | 6 Cyl 3.4 L GAS
View More
View related parts
Pontiac A.I.R. Pump Belt Part Number: 9433772
$23.80
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Belt, A/C Compressor; Serpentine Belt; Drive Belt; V-Belt; Belt; Belt, Drive
Fits the following Pontiac Models:
- J2000 Sunbird | 1985 | Base, LE, SE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Sunbird | 1986-1987 | Base, GT, SE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 12639468
$20.87 MSRP: $37.28
You Save: $16.41 (45%)
Product Specifications
- Other Name: Belt, Generator & A/C Compressor; Serpentine Belt Drive Kit; Accessory Drive Belt; Drive Belt; V-Belt; Belt, Drive
- Replaces: 12600851
Fits the following Pontiac Models:
- G6 | 2007-2010 | Base | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 12569527
$31.39 MSRP: $56.07
You Save: $24.68 (45%)
Product Specifications
- Other Name: Belt; Serpentine Belt Drive Kit; Drive Belt; V-Belt; Belt, Drive
- Replaces: 12561860, 12562626
Fits the following Pontiac Models:
- Firebird | 1998-2002 | Formula, Trans Am | 8 Cyl 5.7 L GAS
View related parts
Pontiac Serpentine Belt Part Number: 12576454
$34.41 MSRP: $61.46
You Save: $27.05 (45%)
Product Specifications
- Other Name: Belt, Fan & Water Pump & Generator & Power Steering Pump; Serpentine Drive Kit; Accessory Drive Belt; V-Belt; Fan Belt; Belt, Drive
- Replaces: 10243936, 12564760, 12569351
Fits the following Pontiac Models:
- Montana | 2001-2005 | Base | 6 Cyl 3.4 L GAS
View related parts
Pontiac Drive Belt Part Number: 19244951
$45.89 MSRP: $71.87
You Save: $25.98 (37%)
Product Specifications
- Other Name: Belt, Drive; Serpentine Belt Drive Kit; Serpentine Belt; V-Belt; Supercharger Belt
- Replaces: 12574914, 24507210
Fits the following Pontiac Models:
- Grand Prix | 1997-2003 | GTP | 6 Cyl 3.8 L GAS

| Page 1 of 6 |Next >

1-20 of 110 Results

Pontiac Drive Belt

Choose OEM Drive Belt, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Pontiac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Pontiac Drive Belt. You can shop at highly competitive prices and protect your budget. All our genuine Pontiac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Pontiac Drive Belt diverts engine to important parts making the entire car alive. Pontiac was born in 1926 and had a reputation of having wide track confidence and being road hungry with a stance that made its rivals appear timid. Drivers connected with the fact that Pontiac preferred cockpit designs that placed all the controls within easy reach so that individuals could concentrate on the road rather than searching and finding buttons. Along the Firebird to family cruisers, Pontiac combined violent fashion with practicality and demonstrated that muscle and practicality could be riding in the same tin. Length of the hood, taut suspensions and frivolous treatment indicated that fun was more important than corporate oily skin. Owners also appreciated the appearance of the cars as being daring but still being practical to commute to work, go on errands and blowouts on the weekend so the brand remained stuck in the minds even when no longer in production. Such swagger and service made intergenerational loyalty. A Drive Belt goes around the crankshaft pulley and sends the alternator, water pump and A/C compressor around in one continuous motion of rubber and fiber. A Drive Belt may be durable in the range of 100,000 miles but replacing it earlier may avert expensive damage to parts. Toothed designs provide grip at high rotational velocity whereas V-profiles remain silent when making low-speed creeps. Whichever the profile, a Drive Belt acts as a silent traffic cop which according to the engine alone cannot access. Frequent checking of cracks, glazing or frayed edges indicate when time to replace is near even before failure.

Pontiac Drive Belt Parts and Q&A

Belt
10029077
Q: What is the method for measuring and adjusting Drive Belt tension on Pontiac Fiero?
A:
Check the tension of each belt by pushing on it at a distance halfway between the pulleys. Push firmly with your thumb and measure this deflection with a ruler. The belt should deflect 114-inch if the distance from pulley center to pulley center is between 7 and 11 inches. The belt should deflect 112:inch if the distance from pulley center to pulley center is between 12 and 16 inches. Another, more precise method of measuring and adjusting belt deflection is accomplished with special belt tension tools which are available from General Motors (J-23600-B or BT 33-95-ACBN). These tools measure the amount of force required to deflect a belt a specified distance. To adjust belt tension, loosen the pivot bolt(s) securing the belt-driven component to the engine block and the retaining nut or bolt securing the component to the slotted adjustment bracket. Use a levering device, such as a large screwdriver or pry bar, to pivot the component until the specified tension is achieved. Be careful not to damage either the component or the engine. Tighten the retaining nut or bolt securing the component to its slotted adjustment bracket snug enough to hold it. Check the belt tension again. Adjust as necessary. Tighten the component securely. If inspection reveals that a belt must be replaced, loosen the pivot bolt of the appropriate accessory (alternator, air conditioning compressor, etc.), slip the old belt off the crankshaft pulley and accessory pulley, then lift it out. Before installing the new belt, make sure it's the same width and length as the old one. Once the new belt is in place, tighten and adjust it just like you would a used belt.