How to remove and install the backup Back Up Light Switch and Neutral Safety Switch on Pontiac Fiero?

To take off the backup light/Neutral start switch, first disconnect the electrical harness at the Neutral start switch so that the clip on the switch connection part is open. Then, force the cable by unscrewing the pivot pin at the bottom of the shift lever then, unscrew the nut that joins the lever with the transaxle shaft. After that, there are two bolts that run from the top of the transaxle to secure the backup light/Neutral start switch which is then pulled out. For installation, it is required that the transaxle shaft be in the Neutral before the backup light/Neutral start switch is installed onto the transaxle and the mounting bolts tightened to the prescribed torque. Subsequently, place one of the retrieving levers' nut bearing the lever to the transaxle shaft and the cable assembly should be linked to the pivot pin as well. The backup light and the Neutral start switch are set at the factory and do not call for any settings to be made on the operator part.

OEM Pontiac Back Up Light Switch

Reverse Light Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

50 Back Up Light Switches found

View related parts
Pontiac Neutral Safety Switch Part Number: 12450002
$48.41 MSRP: $105.72
You Save: $57.31 (55%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Transmission Safety Starting Switch Or Speed Sensing; Back Up Light Switch; Back-Up Switch
- Replaced by: 88987185
Fits the following Pontiac Models:
- Bonneville | 1996-1999 | SE, SSE, SSEi | 6 Cyl 3.8 L GAS
- Grand Prix | 1996-1997 | Base, GT, GTP, SE | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Pontiac Back-Up Switch Part Number: 9185908
$17.01
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Back Up Lamp
Fits the following Pontiac Models:
- G6 | 2006-2007 | Base, GT, GTP | 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
Pontiac Neutral Safety Switch Part Number: 1994362
Product Specifications
- Other Name: Switch Assembly-Parking/Neutral Position; Back Up Light Switch; Back-Up Switch; Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Safety Start/Warning
Fits the following Pontiac Models:
- Grand Am | 1994-1995 | GT, SE | 4 Cyl 2.3 L GAS, 6 Cyl 3.1 L GAS
View related parts
Pontiac Neutral Safety Switch Part Number: 12450157
Product Specifications
- Other Name: Switch, Transmission Safety Starting Switch Or Speed Sensing; Range Sensor; Switch, Transmission Safety Start/Warning
Fits the following Pontiac Models:
- Aztek | 2001-2002 | Base, GT | 6 Cyl 3.4 L GAS
- Bonneville | 1996-1999 | SE, SSE, SSEi | 6 Cyl 3.8 L GAS
- Grand Prix | 1998-2003, 1996 | Base, GT, GTP, SE | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
- Montana | 1999-2002 | Base | 6 Cyl 3.4 L GAS
- Trans Sport | 1997-1998 | Base, Montana | 6 Cyl 3.4 L GAS
View More
View related parts
Pontiac Neutral Safety Switch Part Number: 24222729
Product Specifications
- Other Name: Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Safety Start/Warning
Fits the following Pontiac Models:
- Montana | 2003-2005 | Base | 6 Cyl 3.4 L GAS
View related parts
Pontiac Neutral Safety Switch Part Number: 24220734
Product Specifications
- Other Name: Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Safety Start/Warning
Fits the following Pontiac Models:
- Torrent | 2006 | Base | 6 Cyl 3.4 L GAS
View related parts
Pontiac Neutral Safety Switch Part Number: 14066569
Product Specifications
- Other Name: Switch, Transmission Neutral Start; Switch, Transmission Safety Starting Switch Or Speed Sensing
Fits the following Pontiac Models:
- Firebird | 1984-1986 | Base, S/E, Trans Am | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Pontiac Back-Up Switch Part Number: 90069100
Product Specifications
- Other Name: Switch, Back Up Lamp; Back Up Light Switch
Fits the following Pontiac Models:
- LeMans | 1988-1990 | Aerocoupe, Aerocoupe YL, Base, GSE, LE, SE, Value Leader | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
View related parts
Pontiac Neutral Safety Switch Part Number: 11516166
Product Specifications
- Other Name: Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Safety Start/Warning
Fits the following Pontiac Models:
- Sunfire | 1996 | GT, SE | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Pontiac Neutral Safety Switch Part Number: 11516113
Product Specifications
- Other Name: Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Safety Start/Warning
Fits the following Pontiac Models:
- Sunfire | 1996 | GT, SE | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
Pontiac Neutral Safety Switch Part Number: 88974039
Product Specifications
- Other Name: Switch, Parking/Neutral Position & Back Up Lamp; Switch, Transmission Safety Starting or Speed Sensing; Safety Start/Warning Switch.
Fits the following Pontiac Models:
- Vibe | 2005-2010 | AWD, Base, GT | 4 Cyl 1.8 L GAS, 4 Cyl 2.4 L GAS
View related parts
Pontiac Back-Up Switch Part Number: 88975060
Product Specifications
- Other Name: Switch, Back Up Lamp; Back Up Light Switch
Fits the following Pontiac Models:
- Vibe | 2009-2010 | Base | 4 Cyl 1.8 L GAS
View related parts
Pontiac Neutral Safety Switch Part Number: 12450159
Product Specifications
- Other Name: Switch, Transmission Safety Starting Switch Or Speed Sensing; Back Up Light Switch; Back-Up Switch; Switch, Transmission Safety Start/Warning
- Replaces: 11516115
Fits the following Pontiac Models:
- Grand Am | 1996-1998 | GT, SE | 6 Cyl 3.1 L GAS
View related parts
Pontiac Back-Up Switch Part Number: 14009262
Product Specifications
- Other Name: Switch; Back Up Light Switch; Switch, Back Up Lamp
Fits the following Pontiac Models:
- Fiero | 1984-1985 | Base, GT, SE, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
- J2000 Sunbird | 1984-1985 | Base, LE, SE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Phoenix | 1984 | Base, LE, SE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
- Sunbird | 1986-1990 | Base, GT, LE, SE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View More
View related parts
Pontiac Neutral Safety Switch Part Number: 14047186
Product Specifications
- Other Name: Switch A; Back Up Light Switch; Back-Up Switch; Switch, Back Up Lamp
Fits the following Pontiac Models:
- Grand Am | 1985-1990 | Base, LE, SE | 4 Cyl 2.0 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
- J2000 Sunbird | 1984-1985 | Base, LE, SE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
- Sunbird | 1986-1990 | Base, GT, LE, SE | 4 Cyl 1.8 L GAS, 4 Cyl 2.0 L GAS
View More
View related parts
Pontiac Neutral Safety Switch Part Number: 469085
Product Specifications
- Other Name: Switch Assembly, Neutral Start Trans; Switch, Transmission Safety Starting Switch; Speed Sensing; Neutral Start; Safety Start/Warning
Fits the following Pontiac Models:
- T1000 | 1984-1987 | Base | 4 Cyl 1.6 L GAS
View related parts
Pontiac Neutral Safety Switch Part Number: 10045862
Product Specifications
- Other Name: Switch; Switch, Transmission Safety Starting Switch Or Speed Sensing; Switch, Transmission Safety Start/Warning
Fits the following Pontiac Models:
- Fiero | 1984-1988 | Base, GT, SE, Sport, Value Leader | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
- LeMans | 1988-1993 | Aerocoupe, Aerocoupe YL, Base, GSE, LE, SE, Value Leader | 4 Cyl 1.6 L GAS, 4 Cyl 2.0 L GAS
View related parts
Pontiac Back-Up Switch Part Number: 10094661
Product Specifications
- Other Name: Switch, Back Up Lamp; Back Up Light Switch
Fits the following Pontiac Models:
- Grand Am | 1991-1998 | GT, LE, SE, Value Leader | 4 Cyl 2.3 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.1 L GAS
- Sunbird | 1991-1994 | GT, LE, LE Value Leader, SE, Value Leader | 4 Cyl 2.0 L GAS, 6 Cyl 3.1 L GAS
- Sunfire | 1995-1999 | GT, SE | 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View More
View related parts
Pontiac Neutral Safety Switch Part Number: 10075403
Product Specifications
- Other Name: Switch, Back Up Lamp; Back Up Light Switch; Back-Up Switch
Fits the following Pontiac Models:
- 6000 | 1986-1990 | Base, LE, SE, Special Edition, STE | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
- Fiero | 1984-1988 | Base, GT, SE, Sport, Value Leader | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
Pontiac Neutral Safety Switch Part Number: 14101881
Product Specifications
- Other Name: Switch Assembly-Back Up Lamp; Back Up Light Switch; Back-Up Switch; Switch, Back Up Lamp
Fits the following Pontiac Models:
- Grand Prix | 1988-1993 | Base, GT, GTP, LE, Mclaren, SE, STE | 4 Cyl 2.3 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS

| Page 1 of 3 |Next >

1-20 of 50 Results

Pontiac Back Up Light Switch

Choose OEM Back Up Light Switch, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Pontiac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Pontiac Back Up Light Switch. You can shop at highly competitive prices and protect your budget. All our genuine Pontiac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Pontiac Back Up Light Switch switches to reverse lighting as soon as you switch to reverse. Pontiac was born in 1926 and developed its reputation on the basis of wide track stance, rollicking handling and styling that made daily commutes feel like a lap of honor. Pontiac displayed the capability to combine practicality and a smile-inducing spurt whenever the light changed to green with muscle cars like the Firebird and aggressive sedans like the Grand Am. Drivers adored the fact that Pontiac could provide affordable speed without compromising on everyday comfort and making both parking lots and highways playgrounds. The trait was the combination of solid building, control instinct and the readiness to accept punishment without any cries. Owners valued such an attitude, as they would not have to spend as much time trying to keep such delicate trimming and having time to pursue sunsets. On boulevard tours and snowy roads, the model never seemed like it was out of its element. The Back Up Light Switch is another device, an addition to the transmission case or hydraulic circuit, that closes in only after the gear lever is thrown into reverse and fills the rear area with sharp light to ensure that other automobile drivers and lost pets understand just what you intend to do, reducing the chances of being hit in dark lanes and overcrowded driveways. The Back Up Light Switch is designed with tough contacts and a closed casing to withstand grit, vibration and repeated heat cycles that would worry other parts with less durability into a premature death. Have it installed once and the Back Up Light Switch quietly takes years to continue with its work and requests that you change the gear to reverse as usual.

Pontiac Back Up Light Switch Parts and Q&A

Neutral Safety Switch
1994255
Q: How to remove and install the backup Back Up Light Switch and Neutral Safety Switch on Pontiac Fiero?
A:
To take off the backup light/Neutral start switch, first disconnect the electrical harness at the Neutral start switch so that the clip on the switch connection part is open. Then, force the cable by unscrewing the pivot pin at the bottom of the shift lever then, unscrew the nut that joins the lever with the transaxle shaft. After that, there are two bolts that run from the top of the transaxle to secure the backup light/Neutral start switch which is then pulled out. For installation, it is required that the transaxle shaft be in the Neutral before the backup light/Neutral start switch is installed onto the transaxle and the mounting bolts tightened to the prescribed torque. Subsequently, place one of the retrieving levers' nut bearing the lever to the transaxle shaft and the cable assembly should be linked to the pivot pin as well. The backup light and the Neutral start switch are set at the factory and do not call for any settings to be made on the operator part.