Choose OEM Alternator Brush, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Pontiac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Pontiac Alternator Brush. You can shop at highly competitive prices and protect your budget. All our genuine Pontiac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
The Pontiac Alternator Brush is a small carbon block that rides on the rotor slip rings within your generator, supplying field current to keep the battery alive. The Wide-Track stance that Pontiac developed in gluing the tires to corners is what gives any Firebird or any Grand Am a sense of being stuck and willing to take off upon smashing the throttle body button. The aggressive split grille, bold fenders, and tilted cockpit that is tilted towards the driver make ordinary errands seem like small road rallies, but the chassis absorbs potholes without any make-a-spectacle. Contemporary electronic fuel injection and close ratio steering are coupled with one another, and hence a Pontiac of any age responds immediately to the signals and leaves one smiling throughout a weekend trip. Basic components such as the Alternator Brush are low priced and can be stored in the glove box to ensure that the charging system is reliable during long highway pulls. Replace with a new Alternator Brush using simple hand tools and ensure it begins by disconnecting the battery, unbolting the alternator, then snapping off the rear. Lift the spring onto the brush mark, slide the worn part out, clean the slip rings using fine grit paper, place the new Alternator Brush so that it slides freely, then tighten the leads and reassemble the housing. Bolt the alternator to the Pontiac bracket, reconnect the belt, adjust tension by twisting the thumb firmly, reconnect the battery, and start the engine to ensure that it is running at a constant voltage and not making any noise.