Choose OEM Evaporator, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Hummer's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Hummer Evaporator. You can shop at highly competitive prices and protect your budget. All our genuine Hummer parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
The Hummer Evaporator cools and dehumidifies the cabin to make sure that the adventures are comfortable at all times even when the outside trail becomes hot and humid and the driver should find it much easier after each mile. Owners of Hummer will value rock-solid suspension, big ground clearance and intelligent four wheel drive that allows them to roll over boulders, cross streams and even pull up on highway lanes with the same level of confidence. On the inside, the Hummer sends broad seats, sharp digital displays of the terrain, and easy controls that complement its out-spoken exterior style, therefore teenagers or adults do not have to worry about intricate buttons. Computed force is combined with even-handed handling, allowing the Hummer to retain its military inspired legendary toughness and provide current comfort. The Evaporator per se is housed on the HVAC case where liquid refrigerant boils, absorbing heat and humidity, and forcing it out by the vents into crisp air. To remove an old Evaporator and install a new one, disconnection of the battery is required and then safely drain the refrigerant and take out interior trim and the glove box to access the HVAC case. The next steps should be unbolting refrigerant lines and electrical plugs, the case and removing the old core. Apply transfer seals, sensors, and new O-rings, install the new Evaporator, reoil the case and reconnect ducts. Re-install, reconnect wiring, vacuum and re-charge the system, re-tighten fittings and run the engine to ensure a cold airflow on all fan speeds and to check for any leakage.