ChevyParts
My Garage
My Account
Cart
OEM GMC Yukon Shock Absorber
Suspension Shock Absorber- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
146 Shock Absorbers found
GMC Yukon Strut Part Number: 84081998
$111.97 MSRP: $200.86You Save: $88.89 (45%)Ships in 1-2 Business Days
GMC Yukon Shock Absorber Part Number: 20955486
$67.96 MSRP: $186.79You Save: $118.83 (64%)Ships in 1-2 Business Days
GMC Yukon Shock, Rear Part Number: 19331452
$292.85 MSRP: $798.88You Save: $506.03 (64%)Ships in 1-2 Business Days
GMC Yukon Strut Part Number: 22811853
$119.08 MSRP: $231.13You Save: $112.05 (49%)Ships in 1-2 Business Days
GMC Yukon Shock Absorber Part Number: 23148688
$223.60 MSRP: $419.90You Save: $196.30 (47%)Ships in 1-2 Business Days
GMC Yukon Strut Part Number: 84844872
$76.37 MSRP: $209.89You Save: $133.52 (64%)Ships in 1-3 Business Days
GMC Yukon Shock Absorber Part Number: 22811843
$30.46 MSRP: $106.44You Save: $75.98 (72%)Ships in 1-2 Business Days
GMC Yukon Shock Absorber Part Number: 23183849
$230.25 MSRP: $413.00You Save: $182.75 (45%)Ships in 1-2 Business Days
GMC Yukon Shock Absorber Part Number: 84171361
$111.41 MSRP: $209.22You Save: $97.81 (47%)Ships in 1-2 Business Days
GMC Yukon Strut Mount Part Number: 22827168
$96.64 MSRP: $187.56You Save: $90.92 (49%)Ships in 1-2 Business Days
GMC Yukon Shock Absorber, Rear Part Number: 19432783
$174.12 MSRP: $337.97You Save: $163.85 (49%)GMC Yukon Shock Absorber Part Number: 84458384
$107.39 MSRP: $210.26You Save: $102.87 (49%)Ships in 1-2 Business DaysGMC Yukon Strut Part Number: 23124596
$304.33 MSRP: $550.82You Save: $246.49 (45%)Ships in 1-2 Business DaysGMC Yukon Strut Part Number: 84043190
$72.35 MSRP: $129.20You Save: $56.85 (44%)Ships in 1-2 Business DaysGMC Yukon Strut Part Number: 23179303
$113.94 MSRP: $221.14You Save: $107.20 (49%)Ships in 1-2 Business DaysGMC Yukon Strut Part Number: 23183876
$113.94 MSRP: $221.14You Save: $107.20 (49%)Ships in 1-2 Business DaysGMC Yukon Strut Part Number: 23179308
$123.29 MSRP: $221.14You Save: $97.85 (45%)Ships in 1-2 Business DaysGMC Yukon Shock Absorber Part Number: 84082043
$44.69 MSRP: $122.84You Save: $78.15 (64%)Ships in 1-2 Business DaysGMC Yukon Shock Absorber Part Number: 84482168
$106.86 MSRP: $209.22You Save: $102.36 (49%)Ships in 1-2 Business Days
GMC Yukon Shock Absorber, Front Part Number: 19420489
$344.61 MSRP: $647.16You Save: $302.55 (47%)Ships in 1-2 Business Days
| Page 1 of 8 |Next >
1-20 of 146 Results
GMC Yukon Shock Absorber
Want to cut long-term maintenance and repair costs? Choose OEM Shock Absorber. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Yukon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Yukon Shock Absorber includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
The component known as The Shock Absorber in GMC Yukon cars is very significant in the suspension system since it collaborates with the struts. Thus, the operation of changing kinetic energy to heat and its effect on bouncing, as well as the absorption of shock impulses, the Shock Absorber enhances ride quality and steering when on or off road. Throughout the years of designing innovation, several types of Shock Absorber have been developed such as the twin tube and mono tube where the controlling mechanism of the hydraulic fluid and the further strengthening of the performance under different form of driving situations varies with each types. More specific features of the Shock Absorber are PSD, ASD, electrorheological dampers, magnetorheological dampers enhancing the shock absorption and comfort by managing the suspension system activities themselves.
GMC Yukon Shock Absorber Parts and Q&A
- Q: How to replace the shock absorber on GMC Yukon?A:The initial step for Shock Absorber (1500) replacement requires raising and supporting both vehicle and rear axle. The electronic suspension control connector needs to be disconnected if it is present. Before proceeding, you should enable air leveling using an on ignition alongside a scan tool then clear all air pressure from the system for 60 seconds. The replacement process begins by disconnecting the air line when present followed by the removal of upper Shock Absorber nuts and bolts and then lower Shock Absorber nuts and bolts and finally the Shock Absorber. The procedure starts by installing the Shock Absorber followed by placement of the upper Shock Absorber nut and bolt . Keep in mind the fastener caution guidelines during the process. Move to the installation of the lower Shock Absorber nut and bolt while torquing upper and lower nuts and to 115 nm (85 lb ft). The installation requires reconnecting the electronic suspension control connector when present together with reconnecting the air line when fitted. Lower the vehicle by removing the support which holds the rear axle. Turn on ignition with engine off along with the start of a scan tool process followed by air compressor operation for 30 seconds until the vehicle rear section starts to elevate. Reconnect the scan tool while turning off and then back on the ignition key with engine running to allow the air suspension system to adjust its rear suspension position.
- Q: How Should Front Coil Springs and Shock Absorber Be Serviced Using the CH-48845 (Spring Compressor) on GMC Yukon?A:The ch-48845 (Spring Compressor) represents the sole acceptable tool for suspension component servicing to prevent harm because regular tools lack sufficient strength to deal with these springs. First position the front shock absorber assembly inside the ch-48845 while ensuring an adjustment of the upper retaining bracket protects front suspension mounts on vehicles with electronic suspension control. Install the shock absorber into the upper retaining bracket of ch-48845 before using the ch-48845 to compress the front spring. You need an appropriate sized wrench to hold the shock absorber shaft before you remove its nut which must get discarded for a new one. Proceed with removing the front lower shock absorber followed by the front spring lower insulator and subsequent removal of the front suspension strut mount front spring upper seat front suspension strut bumper front spring upper insulator along with the front suspension spring from the spring compressor. You need to install the front suspension strut mount , front spring upper seat , front suspension strut bumper , front spring upper insulator , and front suspension spring into the spring compressor with an inboard strut mounting stud position close to the outboard stud that should align outward. Set the spring seat stop and outboard stud along with the lower strut mount center at a point across from the spring seat notch situated right of the outboard stud. Place the shock absorber into the upper retaining bracket of the ch-48845 then repeat compression of the front spring. Secure the shock absorber shaft using a proper wrench before placing the new shock absorber nut and applying torque at 80 nm (59 lb ft) when electronics are present or 60 nm (44 lb ft) for non-elec. Sistem vehicles. There must be a 20 nm (15 lb ft) torque using the electrical connector when installing the electronic suspension. The shock absorber assembly should be taken from the spring compressor before mounting it inside the vehicle.
Related GMC Yukon Parts
GMC Yukon Axle Beam Mount
GMC Yukon Axle Shaft
GMC Yukon Axle Support Bushings
GMC Yukon Control Arm Bushing
GMC Yukon Lateral Arm
GMC Yukon Leaf Spring Plate
GMC Yukon Shock And Strut Mount
GMC Yukon Spindle
GMC Yukon Suspension Control Module
GMC Yukon Sway Bar Bracket
GMC Yukon Sway Bar Kit
GMC Yukon Trailing Arm