Drain the cooling system by using either the vac-n-fill or static fill procedure as the first step. Then, move the surge tank inlet hose clamp away from the
Radiator and take the surge tank inlet hose off the Radiator. Then, moved the surge tank inlet hose clamp onto the surge tank and take the surge tank inlet hose off from the surge tank. Install the surge tank inlet hose to the surge tank, then make sure the surge tank inlet hose clamp goes on the surge tank. Subsequently, attach the surge tank inlet hose to the Radiator, and put the surge tank inlet hose clamp on the Radiator. After everything else is done, fill the cooling system by following either the vac-n-fill or static fill process.