Other Name: Pump Assembly-Power Steering; Pump, Power Steering
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996 GMC Savana 3500 | Base, SLE | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS
GMC Savana 3500 Power Steering Pump
Want to cut long-term maintenance and repair costs? Choose OEM Power Steering Pump. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Savana 3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Savana 3500 Power Steering Pump includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
Q: How to replace the power steering pump on GMC Savana 3500?
A:
The power steering pulley remover (J25034-C) should be used first to detach the Power Steering Pump pulley from the vehicle. A drain pan should be placed below the vehicle while technicians disconnect three hoses from the pump. The team members should use end caps to prevent dirt entrance into the pump and the hoses. The installation begins by removing Power Steering Pump mounting bolts together with accessory mounting bracket bolts and nuts before pulling forward the accessory bracket to extract the Power Steering Pump. The rear bracket installation requires users to connect it to the pump then tighten the nut to 50 nm (37 ft. Lbs.). Begin installation by mounting the engine pump with bolts at 50 nm (37 ft. Lbs. Torque) followed by relocating the accessory bracket for bolting with bolts and a nut at specified torque values (50 Nm for bolts and 41 Nm for the nut). Next slip off the caps from the Power Steering Hoses while following their previous placement and join the pressure hose to the pump before securing the fitting to 27 nm (20 ft. Lbs.). Utilize retaining clamps to secure the power steering return hose before doing the same procedure for the reservoir outlet hose. Insert the pulley onto the pump shaft before using the Power Steering Pump pulley installer (J25033-C) for assembly. Complete the system by adding power steering fluid before performing a bleeding procedure while removing the drain pan situated under the vehicle.