OEM GMC Savana 3500 Cruise Control Module

GMC Savana 3500 Cruise Control Module Parts and Q&A

• Control Module
  15752335
  Q: How to replace the cruise control module on GMC Savana 3500?

  A:

  First, lift and support the hood, and pull out the air cleaner assembly from the car. For the 4.3l engine, and for the 4.8l, 5.3l, and 6.0l engines, remove the electrical connection from the Cruise Control Module and cruise control cable from the Cruise Control Module. Take the two nuts that hold the Cruise Control Module to the cruise control bracket and remove it from the cruise control bracket and the vehicle. For installation, have the Cruise Control Module go back into the vehicle and mount it over the cruise control bracket , and tighten the two nuts to 5 n.m (44 lb in). Next, connect the cruise control cable and the electrical connector to the Cruise Control Module, reinsert the air cleaner assembly, and, eventually, close the hood.
• Control Module
  25315088
  Q: How to service the Cruise Control Module on GMC Savana 3500?

  A:

  The Cruise Control Module service process starts by raising and supporting the hood followed by air cleaner assembly removal from the vehicle. First disconnect both the electrical connector and the cruise control cable attached to the Cruise Control Module. Remove the two nuts from the Cruise Control Module to the cruise control bracket and carefully extract the Cruise Control Module from both components. To install the Cruise Control Module position it first into the vehicle bracket system after placing the unit on the cruise control bracket. Tighten the two mounting nuts that attach the Cruise Control Module to the cruise control bracket while using a 5 n.m torque wrench (44 lb in). To complete this task reconnect the electrical connector and cruise control cable to the Cruise Control Module before reinstalling the air cleaner assembly. The hood closure follows as the last step.