How to replace the endgate bumper on a utility on GMC Jimmy?

You should start by removing the lower side bumper bolt before loosening the upper side bumper bolt to rotate the side bumper along with its spacer (if available) away from the lower side bumper bolt hole. Move on to install the lower side bumper bolt while tightening it for solid backing plate attachment. Following this stage remove the upper side bumper bolt before later taking out the spacer (if present) and side bumper. Start the installation process by putting on the side bumper followed by the spacer (if equipped) and finish by installing the upper side bumper bolt. After proper alignment of the threaded hole, remove the lower side bumper bolt so you can position the side bumper together with its spacer (if present) through the backing plate's threaded hole. After proper alignment of the threaded hole, install the lower side bumper bolt by applying 22 N.m (16 lb ft) of torque.

OEM GMC Jimmy Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Bumpers found

View related parts
GMC Jimmy Bumper Cover, Front Part Number: 12377116
Product Specifications
- Other Name: Fascia Assembly, Front Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 GMC Jimmy | Diamond Edition, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Wedge Plate Part Number: 20083699
Product Specifications
- Other Name: Bumper; Plate; Bumper, End Gate Support; Plate, Lift Gate
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 GMC Jimmy | Base, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Wedge, Driver Side Part Number: 16627258
Product Specifications
- Other Name: Bumper; Bumper, End Gate Support; Wedge, Lift Gate
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 GMC Jimmy | Base, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Wedge, Passenger Side Part Number: 16627257
Product Specifications
- Other Name: Bumper; Bumper, End Gate Support; Wedge, Lift Gate
- Position: Passenger Side
- Replaces: 20083693
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 GMC Jimmy | Base, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Bumper Cover, Black Part Number: 12549246
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 GMC Jimmy | Base, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Bumper Cover, Front Part Number: 12377119
Product Specifications
- Other Name: Fascia Assembly, Front Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 GMC Jimmy | Diamond Edition, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Bumper Cover, Front Part Number: 12377118
Product Specifications
- Other Name: Fascia Assembly, Front Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 GMC Jimmy | Diamond Edition, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Bumper Cover Part Number: 12377117
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 GMC Jimmy | Diamond Edition, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Bumper Cover, Front Part Number: 12377115
Product Specifications
- Other Name: Fascia Assembly, Front Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2000 GMC Jimmy | Envoy | 6 Cyl 4.3 L GAS
View related parts
GMC Jimmy Bumper Cover, Rear Part Number: 12377098
Product Specifications
- Other Name: Fascia Assembly, Rear Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2001 GMC Jimmy | Diamond Edition, Envoy, SL, SLE, SLS, SLT | 6 Cyl 4.3 L GAS

GMC Jimmy Bumper

Want to cut long-term maintenance and repair costs? Choose OEM Bumper. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Jimmy parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Jimmy Bumper includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

GMC Jimmy Bumper Parts and Q&A

Bumper Cover, Front
12377116
Q: How to replace the endgate bumper on a utility on GMC Jimmy?
A:
You should start by removing the lower side bumper bolt before loosening the upper side bumper bolt to rotate the side bumper along with its spacer (if available) away from the lower side bumper bolt hole. Move on to install the lower side bumper bolt while tightening it for solid backing plate attachment. Following this stage remove the upper side bumper bolt before later taking out the spacer (if present) and side bumper. Start the installation process by putting on the side bumper followed by the spacer (if equipped) and finish by installing the upper side bumper bolt. After proper alignment of the threaded hole, remove the lower side bumper bolt so you can position the side bumper together with its spacer (if present) through the backing plate's threaded hole. After proper alignment of the threaded hole, install the lower side bumper bolt by applying 22 N.m (16 lb ft) of torque.