How to Service and Repair the Automatic Transmission Shifter on GMC Canyon?

The first step to replace an automatic transmission shift lever requires disabling the sir system. First remove upper and lower trim covers if needed before taking wire harness straps from the wire harness assembly. The shift lever connector at the column base needs disconnecting before you lift the shift lever seal and move it up the shift lever. Remove the shift lever screw from the shift lever assembly before taking out the shift lever assembly along with the seal from the column. The shift lever seal should be pulled towards the narrow part of the shift lever (base). Detaching the shift lever seal from the shift lever becomes necessary if so instructed. You should position the shift lever seal onto the shift lever assembly before installing the shift lever assembly to the Steering Column. Install the shift lever screw inside the shift lever assembly and create 20 n.m (15 lb ft) torque. Pursue the shift lever seal downward along the shift lever assembly and restore the upper and lower trim covers if required while guiding the shift lever seal into its place within the Steering Column trim covers. Finally, enable the sir system.

How to replace the Automatic Transmission Shifter lever on GMC Canyon?

The first procedure to replace an automatic transmission shift lever requires the disabling of the supplemental inflatable restraint (SIR) system. You must pull the shift lever seal upwards along the shift lever by removing it from steering column trim covers. Unfasten the shift lever bolt on the shift lever before pulling out both pieces along with their shift lever seal from the steering column. Transfer any necessary parts. The shift lever installation requires repositioning it together with the shift lever seal onto the steering column while you should place the shift lever bolt by tightening it to 20 nm (15 lb ft). The shift lever seal requires installation to the column trim covers before reactivating the sir system.

OEM GMC Canyon Automatic Transmission Shifter

AT Shifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Automatic Transmission Shifters found

View related parts
GMC Canyon Shifter Assembly Part Number: 23397472
$142.60 MSRP: $215.13
You Save: $72.53 (34%)
ADD TO CART
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Shift Lever; Gear Shift Assembly; Control, Transmission Shift Control; Control, Transmission Shift
- Replaced by: 85533426
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Shifter Assembly Part Number: 85665134
$70.80 MSRP: $110.82
You Save: $40.02 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control Assembly-Automatic Transmission; Gear Shift Assembly; Control, Transmission Shift
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Gear Shift Assembly Part Number: 24272748
$88.35 MSRP: $131.48
You Save: $43.13 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Control, Transmission Shift Control; Control, Transmission Shift
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2019 GMC Canyon | All Terrain, Base, Denali, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Lock Assembly Part Number: 26086256
Product Specifications
- Other Name: Control Assembly, Automatic Transmission; Control, Transmission Shift Control Lever; Control, Transmission Shift
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Shift Lever Part Number: 15112814
Product Specifications
- Other Name: Lever Assembly-Manual Transmission Control; Gear Shift Assembly; Lever, Transmission Gear Shift Control
- Replaces: 25890708
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Shift Lever Part Number: 25890709
$46.93 MSRP: $69.84
You Save: $22.91 (33%)
Product Specifications
- Other Name: Lever Assembly-Manual Transmission Control; Gear Shift Assembly; Lever, Transmission Control Lever
- Replaces: 15112813
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Lock Assembly Part Number: 19259682
Product Specifications
- Other Name: Control Assembly, Automatic Transmission; Control, Transmission Shift Control Lever; Control, Transmission Control Lever; Control, Transmission Shift
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Shift Lever Part Number: 88964365
$73.63 MSRP: $109.59
You Save: $35.96 (33%)
Product Specifications
- Other Name: Lever Assembly, Automatic Transmission Control; Gear Shift Assembly; Lever, Transmission Gear Shift Control; Lever, Steering Column
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

GMC Canyon Automatic Transmission Shifter

Want to cut long-term maintenance and repair costs? Choose OEM Automatic Transmission Shifter. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Canyon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Canyon Automatic Transmission Shifter includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The GMC Canyon Automatic Transmission Shifter stands as a principal vehicle component which improves driving comfort through all versions of this well-regarded GMC Canyon vehicle line. The shifter system enables users to easily switch between park and reverse together with neutral and drive for complete vehicle transmission management. The GMC Canyon Automatic Transmission Shifter finds its position on the center console or steering column to provide users with easy operation which shows GMC's focus on driver convenience. The automotive manufacturer GMC adopted a shift in shifter design methods during time which led them to replace column-based models with contemporary floor units to match their seating and console requirements. The implementation of electronic shift-by-wire technology represents an important design breakthrough because it removes mechanical links which enables smaller and flexible design options. The innovation delivers dual advantages to GMC Canyon users by improving operational efficiency yet simultaneously enhancing driving safety through exact control facilities. The manufacturer Canyon Automatic Transmission Shifter distinguishes itself as a market-leading component because it efficiently blends with the vehicle capabilities thus providing drivers with an exceptional choice for capable and comfortable transportation. The shifter shows its importance in both driving performance quality and brand brand because it works with many the automaker Canyon models throughout the lineup.

GMC Canyon Automatic Transmission Shifter Parts and Q&A

Shift Lever
25890709
Q: How to Service and Repair the Automatic Transmission Shifter on GMC Canyon?
A:
The first step to replace an automatic transmission shift lever requires disabling the sir system. First remove upper and lower trim covers if needed before taking wire harness straps from the wire harness assembly. The shift lever connector at the column base needs disconnecting before you lift the shift lever seal and move it up the shift lever. Remove the shift lever screw from the shift lever assembly before taking out the shift lever assembly along with the seal from the column. The shift lever seal should be pulled towards the narrow part of the shift lever (base). Detaching the shift lever seal from the shift lever becomes necessary if so instructed. You should position the shift lever seal onto the shift lever assembly before installing the shift lever assembly to the Steering Column. Install the shift lever screw inside the shift lever assembly and create 20 n.m (15 lb ft) torque. Pursue the shift lever seal downward along the shift lever assembly and restore the upper and lower trim covers if required while guiding the shift lever seal into its place within the Steering Column trim covers. Finally, enable the sir system.
Shift Lever
88964365
Q: How to replace the Automatic Transmission Shifter lever on GMC Canyon?
A:
The first procedure to replace an automatic transmission shift lever requires the disabling of the supplemental inflatable restraint (SIR) system. You must pull the shift lever seal upwards along the shift lever by removing it from steering column trim covers. Unfasten the shift lever bolt on the shift lever before pulling out both pieces along with their shift lever seal from the steering column. Transfer any necessary parts. The shift lever installation requires repositioning it together with the shift lever seal onto the steering column while you should place the shift lever bolt by tightening it to 20 nm (15 lb ft). The shift lever seal requires installation to the column trim covers before reactivating the sir system.