How to replace the A/C Condenser on Chevrolet Silverado 1500?

The replacement process of the air conditioning condenser requires refrigerant recovery as its first step. Begin by removing the bolts from the radiator support bracket which requires access from the rear of the upper radiator support. Finally remove the radiator support bracket bolts. After removing the compressor discharge hose assembly bolt you should disconnect the compressor discharge hose assembly. Use a socket wrench to remove the evaporator tube nut then unplug the tube from the condenser. Begin by removing each insulator retainer bolt before taking out the condenser from the vehicle. Implement new condenser installation by adding refrigerant oil which adheres to refrigerant system requirements. Fix the condenser while installing both upper insulator retainers and insulator retainer bolts to achieve 2.4 nm (21 lb in) torque. Fit new sealing washers between the evaporator tube and condenser then install the evaporator tube nut before tightening the connection to 16 nm (12 lb ft). After attaching the compressor discharge hose to the condenser through new sealing washers you must tighten the discharge hose nut to achieve 16 nm (12 lb ft) torque. Add the lower bolts to the hood latch support bracket while torquing them to 9 nm (80 lb in). Then install the radiator support using the upper bolts accessed from behind the upper radiator support until reaching 16 nm (12 lb ft). The radiator support bracket bolts need installation followed by the fascia mounting. The system evacuation and recharging follows after which the component fixtures undergo a leak test with j 39400-a (Halogen Leak Detector).

OEM Chevrolet Silverado 1500 A/C Condenser

Air Conditioning Condenser

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 A/C Condensers found

View related parts
Chevrolet Silverado 1500 Condenser Part Number: 20913752
$252.74 MSRP: $358.19
You Save: $105.45 (30%)
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser A/C; Accumulator; Condenser, A/C Condenser
- Replaces: 15940252, 89018831, 10358953, 15112383, 15922892, 15197203, 52475996, 25967386, 25807797
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013, 2000-2007 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS
View related parts
Chevrolet Silverado 1500 Condenser Part Number: 20913751
$139.54 MSRP: $197.78
You Save: $58.24 (30%)
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser A/C; Accumulator; Condenser, A/C Condenser
- Replaces: 10358952, 15197204, 15922891, 15112272, 25967385, 25807796, 52481720, 89018832, 52487303
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2013 Chevrolet Silverado 1500 | Base, Hybrid, LS, LT, LTZ, SS, WT, XFE, Z71 Off-Road | 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L FLEX
View related parts
Chevrolet Silverado 1500 Condenser Part Number: 87823303
$132.81 MSRP: $267.69
You Save: $134.88 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-A/C; Condenser, A/C Condenser
- Replaced by: 85822146
- Replaces: 84497061, 84537760, 84537761
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2023 Chevrolet Silverado 1500 | Custom, Custom Trail Boss, High Country, LT, LT Trail Boss, LTZ, PPV, RST, SSV, WT, ZR2 | 4 Cyl 2.7 L GAS, 6 Cyl 3.0 L DIESEL, 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Silverado 1500 Condenser Part Number: 84621303
$216.46 MSRP: $326.47
You Save: $110.01 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
- Replaces: 20936312, 20982844
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2018 Chevrolet Silverado 1500 | Custom, High Country, LS, LT, LTZ, SSV, WT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Silverado 1500 Condenser Part Number: 84243592
$363.16 MSRP: $547.76
You Save: $184.60 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser, A/C Condenser
- Replaced by: 84655553
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Silverado 1500 | Custom, High Country, LS, LT, LTZ, SSV, WT | 6 Cyl 4.3 L FLEX, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Silverado 1500 Condenser Assembly Part Number: 84537373
Product Specifications
- Other Name: Condenser Assembly-A/C (Windshield); A/C Condenser; Condenser
- Replaced by: 85145960
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2018 Chevrolet Silverado 1500 | Custom, High Country, LS, LT, LTZ, SSV, WT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS
View related parts
Chevrolet Silverado 1500 Condenser Assembly Part Number: 84802253
$168.44 MSRP: $251.78
You Save: $83.34 (34%)
Product Specifications
- Other Name: Condenser Assembly-A/C; A/C Condenser; Condenser; Condenser, A/C Condenser
- Replaced by: 85145960
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2019 Chevrolet Silverado 1500 | Custom, Custom Trail Boss, High Country, LS, LT, LT Trail Boss, LTZ, RST, SSV, WT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 5.3 L MILD HYBRID EV-GAS (MHEV), 8 Cyl 6.2 L GAS

Chevrolet Silverado 1500 A/C Condenser

Want to cut long-term maintenance and repair costs? Choose OEM A/C Condenser. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Silverado 1500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Silverado 1500 A/C Condenser includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Silverado 1500 A/C Condenser Parts and Q&A

Condenser
20913751
Q: How to replace the A/C Condenser on Chevrolet Silverado 1500?
A:
The replacement process of the air conditioning condenser requires refrigerant recovery as its first step. Begin by removing the bolts from the radiator support bracket which requires access from the rear of the upper radiator support. Finally remove the radiator support bracket bolts. After removing the compressor discharge hose assembly bolt you should disconnect the compressor discharge hose assembly. Use a socket wrench to remove the evaporator tube nut then unplug the tube from the condenser. Begin by removing each insulator retainer bolt before taking out the condenser from the vehicle. Implement new condenser installation by adding refrigerant oil which adheres to refrigerant system requirements. Fix the condenser while installing both upper insulator retainers and insulator retainer bolts to achieve 2.4 nm (21 lb in) torque. Fit new sealing washers between the evaporator tube and condenser then install the evaporator tube nut before tightening the connection to 16 nm (12 lb ft). After attaching the compressor discharge hose to the condenser through new sealing washers you must tighten the discharge hose nut to achieve 16 nm (12 lb ft) torque. Add the lower bolts to the hood latch support bracket while torquing them to 9 nm (80 lb in). Then install the radiator support using the upper bolts accessed from behind the upper radiator support until reaching 16 nm (12 lb ft). The radiator support bracket bolts need installation followed by the fascia mounting. The system evacuation and recharging follows after which the component fixtures undergo a leak test with j 39400-a (Halogen Leak Detector).