How to replace the front wheel bearing, hub, and seal on Chevrolet S10?

Before you start working on the hub assembly you need to support your vehicle with safety stands while raising it. Place a punch into the wheel rotor vanish slots to prevent rotation during repair on 4wd vehicles. Separate both drive axle components from the 4wd model by taking out the nut and washer first. 4wd drivers should disconnect the driveshaft from the hub and bearing by using the axle remover j 45859. Take out the Wheel Speed Sensor mounting bolt and sensor from the Wheel Hub to bearing assembly. Keep the Wheel Hub and bearing safe while removing its mounting bolts through the installation on the Wheel Hub studs on the vehicle's outside face. Take away both the splash shield and the Wheel Hub and bearing seal unit. Just before adding the Wheel Hub and bearing put the seal on the hub first and place the splash shield onto the Steering Knuckle at the correct position. Align the threaded openings of the Steering Knuckle and Wheel Hub before tightening the bolts to 105 nm (77 ft. Lbs.). You should bolt the Wheel Speed Sensor to its place using 18 nm (13 ft. Lbs.) torque settings afterwards. Return the rotor to its place before inserting the rotor vanes punch in 4wd applications. After fitting the drive axle washer, fasten the nut until it reaches 140 nm (103 ft. Lbs.) torque. Replace the wheel and tire once you have finished lowering the vehicle.

OEM Chevrolet S10 Wheel Bearing

Hub Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Wheel Bearings found

View related parts
Chevrolet S10 Axle Bearings, Front Part Number: 457434
$10.48 MSRP: $27.74
You Save: $17.26 (63%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Drive Axle Inner Shaft; Wheel Bearing; Axle Bearing; Output Shaft Bearing; Inner Pinion Bearing; Bearing; Bearings; Bearing, Rear Axle Shaft; Bearing, Front Axle
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-2004 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Wheel Bearing, Front Part Number: 457196
$23.04 MSRP: $43.24
You Save: $20.20 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Front Wheel Brace; Axle Bearing; Wheel Bearings; Front Inner Bearing; Transmission Countershaft Gear Bearing; Front Wheel Inner Bearing.
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-2003 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Output Shaft Bearing, Front Part Number: 26041515
$29.20 MSRP: $54.84
You Save: $25.64 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Wheel Bearing; Axle Bearing; Inner Pinion Bearing
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Wheel Bearing, Rear Part Number: 88927028
$26.51 MSRP: $49.79
You Save: $23.28 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Rear Wheel; Axle Bearing; Axle Bearings; Shaft Bearings; Housing Bearing; Bearing; Bearing, Transmission Countershaft Gear
- Position: Rear
- Replaces: 15595140
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2001 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Axle Bearings, Front Part Number: 26053326
$11.46 MSRP: $20.46
You Save: $9.00 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Axle; Wheel Bearing; Axle Bearing; Output Shaft Bearing; Bearing; Bearings; Bearing, Front Wheel Drive Axle Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet S10 | Base, LS, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Wheel Bearing, Front Outer Part Number: 14066918
$11.29 MSRP: $20.16
You Save: $8.87 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing, Front Wheel Outer; Axle Bearing; Front Wheel Bearing; Front Bearing; Outer Bearing; Bearing
- Position: Front Outer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-2003 Chevrolet S10 | Baja, Base, Durango, EL, LS, Sport, SS, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Hub & Bearing, Front Part Number: 12413045
$234.10 MSRP: $454.33
You Save: $220.23 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hub Kit, Front Wheel; Wheel Bearing & Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.
- Position: Front
- Replaces: 07470607, 19150096, 7470607
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Wheel Bearing, Rear Part Number: 12471606
$8.06 MSRP: $14.39
You Save: $6.33 (44%)
Product Specifications
- Other Name: Bearing, Rear Wheel; Axle Bearing; Shaft Bearings; Bearing Assembly; Housing Bearing; Axle Shaft Bearing; Transmission Countershaft Gear Bearing.
- Position: Rear
- Replaces: 09428573, 07451785, 9428573, 7451785
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-2004 Chevrolet S10 | Baja, Base, Durango, EL, LS, SS, Sport, Tahoe, Xtreme, ZR2, ZR5 | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Axle Bearings, Rear Part Number: 7451785
$8.06 MSRP: $14.39
You Save: $6.33 (44%)
Product Specifications
- Other Name: Bearing Assembly-Rear Wheel R5; Wheel Bearing; Axle Bearing; Shaft Bearings; Bearing, Transmission Counter Gear; Bearing, Rear Axle U Joint; Bearing, Countershaft
- Position: Rear
- Replaced by: 12471606
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1991 Chevrolet S10 | Baja, Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Hub & Bearing, Front Part Number: 7470013
Product Specifications
- Other Name: Hub Kit, Front; Wheel Bearing and Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Hub Kit, Front Wheel
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1997 Chevrolet S10 | Base, LS, SS, ZR2 | 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Front Hub & Bearing Part Number: 7470005
Product Specifications
- Other Name: Hub Kit, Front Wheel; Wheel Bearing & Hub Assembly; Wheel Hub Repair Kit; Axle Bearing.; Front Hub; Hub & Bearing; Hub
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1993 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS

Chevrolet S10 Wheel Bearing

Want to cut long-term maintenance and repair costs? Choose OEM Wheel Bearing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Wheel Bearing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet S10 vehicles have a component known as the Wheel Bearing, which assists the wheels in rotating freely and hence, is related to performance and safety. The hub and bearing assemblies are 3 variants, with the widespread unit assembly that contains the ABS sensor. If the bearings are loose or worn, there will be noise and vibration, which in turn may lead to a wheel coming off. The regularity of inspection and maintenance requirements is to inspect whether it is rough, has play or other damage. Replacement may be necessary, new races and high-quality grease should be used to maintain the correct operation. In summing up, the Wheel Bearing is needed for comfortable and risk-free driving of Chevrolet S10 automobiles.

Chevrolet S10 Wheel Bearing Parts and Q&A

Output Shaft Bearing, Front
26041515
Q: How to replace the front wheel bearing, hub, and seal on Chevrolet S10?
A:
Before you start working on the hub assembly you need to support your vehicle with safety stands while raising it. Place a punch into the wheel rotor vanish slots to prevent rotation during repair on 4wd vehicles. Separate both drive axle components from the 4wd model by taking out the nut and washer first. 4wd drivers should disconnect the driveshaft from the hub and bearing by using the axle remover j 45859. Take out the Wheel Speed Sensor mounting bolt and sensor from the Wheel Hub to bearing assembly. Keep the Wheel Hub and bearing safe while removing its mounting bolts through the installation on the Wheel Hub studs on the vehicle's outside face. Take away both the splash shield and the Wheel Hub and bearing seal unit. Just before adding the Wheel Hub and bearing put the seal on the hub first and place the splash shield onto the Steering Knuckle at the correct position. Align the threaded openings of the Steering Knuckle and Wheel Hub before tightening the bolts to 105 nm (77 ft. Lbs.). You should bolt the Wheel Speed Sensor to its place using 18 nm (13 ft. Lbs.) torque settings afterwards. Return the rotor to its place before inserting the rotor vanes punch in 4wd applications. After fitting the drive axle washer, fasten the nut until it reaches 140 nm (103 ft. Lbs.) torque. Replace the wheel and tire once you have finished lowering the vehicle.