How to replace the rear Tail Light assembly or turn signal bulb on Chevrolet S10?

The first step to change the tail lamp and turn signal bulbs involves opening either the end or liftgate. Twist the bulb sockets in a counterclockwise direction by 1/4 turn to disconnect them from the tail lamp assembly after unscrewing all holding screws. You can take the bulbs out by turning the sockets in a 1/4 counter-clockwise direction. To mount the new bulbs you insert them into sockets and tighten each one by rotating it 1/4 turn clockwise back into the lamp assembly. Connect the tail lamp assembly back to the vehicle and fasten it with screws while tightening them to 1.9 n.m (17 lb in).

How to service the tail light on Chevrolet S10?

Start tail lamp servicing by opening the endgate or liftgate first. Unscrew the tail lamp assembly screws that hold the lamp in place before using a 1/4 turn counter-clockwise rotation to free the bulb sockets from the tail lamp assembly. You need to pull each bulb from its socket to finish removing it. You should place bulbs into their sockets before attaching the bulb sockets to the tail lamp assembly with a clockwise rotation of 1/4 turn. After reattaching the tail lamp assembly to the vehicle follow the fastener notice in service precautions then install screws for assembly retention. The final step involves screw tightening until they reach 1.9 n.m (17 lb in).

OEM Chevrolet S10 Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Tail Lights found

View related parts
Chevrolet S10 Tail Lamp Assembly, Passenger Side Part Number: 5978196
$67.01 MSRP: $99.74
You Save: $32.73 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp, Tail; Tail Light Assembly; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2002 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Tail Lamp Assembly, Passenger Side Part Number: 15166764
$15.03 MSRP: $22.37
You Save: $7.34 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Tail Lamp Part Number: 915707
$44.92 MSRP: $49.66
You Save: $4.74 (10%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Lamp, Tail Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1993 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Tail Lamp Assembly, Driver Side Part Number: 5978195
Product Specifications
- Other Name: Lamp, Tail; Tail Light Assembly; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-2002 Chevrolet S10 | Base, LS, SS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Tail Lamp, Black; Black Bezel Part Number: 919650
Product Specifications
- Other Name: Lamp Assembly-Tail; Lamp, Tail Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993, 1985-1989 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Tail Lamp, Black; Black Bezel Part Number: 919649
Product Specifications
- Other Name: Lamp Assembly-Tail; Lamp, Tail Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1991-1993, 1985-1989 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Tail Lamp Part Number: 915710
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Lamp, Tail Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1993 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Tail Lamp Part Number: 915709
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Lamp, Tail Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1993 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Tail Lamp Part Number: 915708
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Lamp, Tail Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1993 Chevrolet S10 | Baja, Base, Durango, EL, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Tail Lamp, Passenger Side Part Number: 370868
Product Specifications
- Other Name: Lamp Assembly-Tail Combination; Tail Light Assembly; Tail Lamps; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Tail Lamp, Driver Side Part Number: 370867
Product Specifications
- Other Name: Lamp Assembly-Tail Combination; Tail Light Assembly; Tail Lamps; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1988 Chevrolet S10 | Base, Durango, Sport, Tahoe | 4 Cyl 1.9 L GAS, 4 Cyl 2.2 L DIESEL, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 4.3 L GAS
View related parts
Chevrolet S10 Tail Lamp Assembly, Driver Side Part Number: 15166763
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2004 Chevrolet S10 | Base, LS, Xtreme, ZR2, ZR5 | 4 Cyl 2.2 L FLEX, 4 Cyl 2.2 L GAS, 6 Cyl 4.3 L GAS

Chevrolet S10 Tail Light

Want to cut long-term maintenance and repair costs? Choose OEM Tail Light. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet S10 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet S10 Tail Light includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Tail Light is one of the Chevrolet S10's important parts that speaking about its reliability and functionality of the vehicle that belongs to the compact pickup trucks and was firstly produced in 1981. Proclaimed as one of the most effective safety systems, Chevrolet S10 TAIL LIGHT is responsible for the reliable lighting of the automobile's rear part, helping other drivers estimate distances and sizes and indicate intentions of stopping or turning. Able to fit in the S10 models across the three generations, the Tail Light's engineering allows it to meet and functions in compliance with the set safety standards, augmenting the automobiles in question's overall performance. These novelties are the different illumination styles, which include incandescent bulbs, LED, and fiber optics; thus, they can be personalized without causing any problem. The versatility further serves to improve the aesthetic appeal of the Chevrolet S10 while the tail lights are crucial in the safety of the vehicle since a properly functioning part minimizes on cases of accidents. Furthermore, the Tail Light may be ordered with different configurations; it is possible to put in the totally customized backgrounds and lenses, which makes this product specific in automotive industry. In conclusion, the Tail Light represents the focus of the brand on the quality and innovation, which supports the Chevrolet S10 model's reputation that is defined as reliable and effective for the consumers with a wide range of needs.

Chevrolet S10 Tail Light Parts and Q&A

Tail Lamp Assembly, Passenger Side
15166764
Q: How to replace the rear Tail Light assembly or turn signal bulb on Chevrolet S10?
A:
The first step to change the tail lamp and turn signal bulbs involves opening either the end or liftgate. Twist the bulb sockets in a counterclockwise direction by 1/4 turn to disconnect them from the tail lamp assembly after unscrewing all holding screws. You can take the bulbs out by turning the sockets in a 1/4 counter-clockwise direction. To mount the new bulbs you insert them into sockets and tighten each one by rotating it 1/4 turn clockwise back into the lamp assembly. Connect the tail lamp assembly back to the vehicle and fasten it with screws while tightening them to 1.9 n.m (17 lb in).
Tail Lamp Assembly, Passenger Side
5978196
Q: How to service the tail light on Chevrolet S10?
A:
Start tail lamp servicing by opening the endgate or liftgate first. Unscrew the tail lamp assembly screws that hold the lamp in place before using a 1/4 turn counter-clockwise rotation to free the bulb sockets from the tail lamp assembly. You need to pull each bulb from its socket to finish removing it. You should place bulbs into their sockets before attaching the bulb sockets to the tail lamp assembly with a clockwise rotation of 1/4 turn. After reattaching the tail lamp assembly to the vehicle follow the fastener notice in service precautions then install screws for assembly retention. The final step involves screw tightening until they reach 1.9 n.m (17 lb in).