OEM Chevrolet Monte Carlo Transmission Pan

Chevrolet Monte Carlo Transmission Pan Parts and Q&A

• Oil Pan
  24206181
  Q: How to replace the transmission pan in an automatic transmission on Chevrolet Monte Carlo?

  A:

  The vehicle needs lifting while support makes the procedure possible by placing a drain pan below the automatic transmission Oil Pan. The Oil Pan bolts need removal while handling these components to preserve the integrity of Oil Pan-case connections preventing fluid leaks. A rubber mallet or screwdriver serves to slowly free the Oil Pan from its position as the technician takes out both the Oil Pan and the Oil Pan Gasket. Check the Oil Pan and filter screen for any presence of metal particles along with clutch facing material and rubber fragments and engine coolant particles and examine the Oil Pan flange for any deformation which requires an immediate replacement. Replace the bolt assembly together with a washer if an inverted washer is detected during the inspection of Oil Pan bolt washers. Clean and dry the Oil Pan and case flange surfaces before removing all residue of old gasket material using solvent on the case and Oil Pan Gasket surfaces. Allow them to air dry. Set the automatic transmission Oil Pan in place while mounting its gasket with proper torque of 14 nm (10 ft. Lbs.) onto the installed Oil Pan bolts. Through the lowering of the vehicle fill automatic transmission fluid with care to stop against excessive fluid addition which could produce foam and damage the system. Use the park gear setting to start the engine while maintaining a slow idle without quick accelerations and check for automatic transmission fluid leaks before taking off the drain pan located beneath the vehicle.