How to replace the Tail Light on Chevrolet Monte Carlo?

To replace the taillamp, open the rear compartment and disconnect the rear compartment convenience net. Unscrew the upper wingnut of the taillamp and pull back the rear compartment trim panel. Next, take the lower wingnuts out and pull the taillamp from the rear body panel while disconnecting the electrical connector. Then unscrew the taillamp socket to the left, as well as remove and take out the bulb. Perform this operation for the sidemarker lamp socket as well as the bulb. For installation, begin by reconnecting the bulb at the taillamp socket, then at the sidewamker lamp socket, tighten them clockwise. Connect the electrical connector back to the taillamp and then return the taillamp to rear body panel and secure it with the lower wingnuts. Pull the rear compartment trim panel to its place and secure with the upper wingnut. Finally, reconnect the rear compartment convenience net and close the rear compartment.

How to service the tail light on Chevrolet Monte Carlo?

Service of the tail lamp begins by first opening the rear compartment then disconnecting the rear compartment convenience net. Use a screwdriver to remove the upper wingnut securing the tail lamp before pulling the rear trim panel back from the tail lamp assembly. First extract the lower wingnuts (WINGNUT) from the tail lamp before you can remove the lamp from its position within the rear body panel. Begin by turning off the power to the tail lamp then follow the electrical wiring routing notice in service precautions. Twist the tail lamp socket counterclockwise to detach it from the fixture then remove the bulb in the socket. To replace the bulb begin by turning the sidemarker lamp socket counterclockwise then take out the bulb from its socket. Start by putting the bulb into the tail lamp socket followed by the sidemarker lamp socket for installation. First turn the sidemarker lamp socket clockwise before moving on to the tail lamp socket which also needs to be positioned clockwise. You should reconnect the electrical connector to the tail lamp after which you can put the tail lamp back onto the rear body panel. Secure both lower wingnuts (WINGNUT) then pull the rear compartment trim panel away from the tail lamp before installing the upper wingnut (WINGNUT) to the tail lamp. Reinstall the rear compartment convenience net after you close the rear compartment.

OEM Chevrolet Monte Carlo Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Tail Lights found

View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 5978583
$78.38 MSRP: $149.52
You Save: $71.14 (48%)
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 5978586
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Tail Lamp; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 5978585
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Tail Lamp; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 5978584
Product Specifications
- Other Name: Lamp Assembly, Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 15913299
Product Specifications
- Other Name: Lamp, Tail Lamp; Tail Light
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 15913298
Product Specifications
- Other Name: Lamp, Tail Lamp; Tail Light
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Backup Lamp Assembly, Driver Side Part Number: 10440612
Product Specifications
- Other Name: Lamp Assembly-Back Up (Left-Hand); Back Up Light; Lens & Housing; Lamp, Back Up Lamp
- Position: Driver Side
- Replaces: 10289899
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Driver Side Part Number: 10326670
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 10419774, 10440909
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Tail Lamp Assembly, Passenger Side Part Number: 10326669
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 10419773, 10440908
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Backup Lamp Assembly, Passenger Side Part Number: 10440611
$54.81 MSRP: $81.58
You Save: $26.77 (33%)
Product Specifications
- Other Name: Lamp Assembly-Back Up (Right-Hand); Back Up Light; Lens & Housing; Lamp, Back Up Lamp
- Position: Passenger Side
- Replaces: 10289898
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2007 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, LTZ, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS

Chevrolet Monte Carlo Tail Light

Want to cut long-term maintenance and repair costs? Choose OEM Tail Light. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Tail Light includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Monte Carlo Tail Light is appropriately labelled as the Tail Light, the significance of this indicates the reliability and performance of the car. Playing a significant role in increase of safety, the tail light enlightens the rear part of the Chevrolet Monte Carlo to allow other drivers note the size and the distance of the Monta Carlo and indicate stopsigns and turns. Through time, the Chevrolet Monte Carlo has incorporated numerous types of tail lightings; the incandescent, the LED and even the fiber optic style that integrates style and function in the vehicle's lighting system. This implies that every tail light should conform to these standards to work well with the different Monte Carlo models and blend well with the car's design and appearance. Other features like Rear position lamps and centre high mount stop lamps are other features that make the Chevrolet Monte Carlo efficient and safer in roads hence minimizing on accidents that may occur. The Monte Carlo model, which is characterized by a luxurious and sports character and suspension, has gone through six successive generations; however, all of them for many years demonstrated experimental V6 and V8 engines. It has been estimated that every detailed component of the Monte Carlo's model is crucial in the continuity of its tradition and the effecting of its performance and safety. Chevrolet Monte Carlo Tail Light is one of the most popular models with unique designs and improved functions in automotive market, which well represents Chevrolet's policy of excellent quality and technology. Turning to the case of the Chevrolet Monte Carlo, this vital component- specifically, the tail light- now not only extends the functionality of the car but strengthens the vehicle's status as an emblem of the personal luxury car segment.

Chevrolet Monte Carlo Tail Light Parts and Q&A

Tail Lamp Assembly, Passenger Side
10326669
Q: How to replace the Tail Light on Chevrolet Monte Carlo?
A:
To replace the taillamp, open the rear compartment and disconnect the rear compartment convenience net. Unscrew the upper wingnut of the taillamp and pull back the rear compartment trim panel. Next, take the lower wingnuts out and pull the taillamp from the rear body panel while disconnecting the electrical connector. Then unscrew the taillamp socket to the left, as well as remove and take out the bulb. Perform this operation for the sidemarker lamp socket as well as the bulb. For installation, begin by reconnecting the bulb at the taillamp socket, then at the sidewamker lamp socket, tighten them clockwise. Connect the electrical connector back to the taillamp and then return the taillamp to rear body panel and secure it with the lower wingnuts. Pull the rear compartment trim panel to its place and secure with the upper wingnut. Finally, reconnect the rear compartment convenience net and close the rear compartment.
Backup Lamp Assembly, Passenger Side
10440611
Q: How to service the tail light on Chevrolet Monte Carlo?
A:
Service of the tail lamp begins by first opening the rear compartment then disconnecting the rear compartment convenience net. Use a screwdriver to remove the upper wingnut securing the tail lamp before pulling the rear trim panel back from the tail lamp assembly. First extract the lower wingnuts (WINGNUT) from the tail lamp before you can remove the lamp from its position within the rear body panel. Begin by turning off the power to the tail lamp then follow the electrical wiring routing notice in service precautions. Twist the tail lamp socket counterclockwise to detach it from the fixture then remove the bulb in the socket. To replace the bulb begin by turning the sidemarker lamp socket counterclockwise then take out the bulb from its socket. Start by putting the bulb into the tail lamp socket followed by the sidemarker lamp socket for installation. First turn the sidemarker lamp socket clockwise before moving on to the tail lamp socket which also needs to be positioned clockwise. You should reconnect the electrical connector to the tail lamp after which you can put the tail lamp back onto the rear body panel. Secure both lower wingnuts (WINGNUT) then pull the rear compartment trim panel away from the tail lamp before installing the upper wingnut (WINGNUT) to the tail lamp. Reinstall the rear compartment convenience net after you close the rear compartment.