How to replace the Engine Oil Cooler Hose/Pipe on Chevrolet Monte Carlo?

For replacement of the Engine Oil Cooler hose/pipe, to begin with, you must remove the Engine Oil Cooler from your vehicle as well as the right engine splash shield. Remove the Engine Oil Cooler lines from the engine oil filter adapter and then unscrew the Engine Oil Cooler line mounting bolt along with the Engine Oil Cooler line mounting block. Cut and take the tie strap used to attach the Engine Oil Cooler lines to the frame off, and then remove the Engine Oil Cooler lines from the vehicle. For installation, make sure to route the Engine Oil Cooler lines beneath the Battery Cable before routing the same back to the vehicle alongside the Engine Oil Cooler. Cook on a low heat if one exists, occasionally stirring the spices and oil, until you get a rich, deep color from the spices -- this could take anywhere from twenty minutes to an hour, depending how strong you want the curry and the quantities of coconut milk and tomatoes used. Remove the lid to look for the right shade of brown, testing the flavor on a lump of rice or a small piece of saute onion. Mount the Engine Oil Cooler lines to the mounting block of the Engine Oil Cooler lines, and install the bolt to through the mounting block screws, tightening it into a torque of 3.4 nm (30 in lb). Lastly, tighten a new tie strap on the lines and frame, reinstall the right engine splash shield, and add the correct amount of engine oil.

OEM Chevrolet Monte Carlo Oil Cooler Hose

Oil Cooler Line

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Oil Cooler Hoses found

View related parts
Chevrolet Monte Carlo Cooler Pipe Part Number: 24506765
$7.70 MSRP: $14.77
You Save: $7.07 (48%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Engine Oil Cooler
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Outlet Hose Part Number: 24506766
$12.01 MSRP: $18.81
You Save: $6.80 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Oil Cooler; Oil Cooler Hose; Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Cooler Pipe Part Number: 15213201
$28.64 MSRP: $47.18
You Save: $18.54 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Transmission Fluid Cooler; Transmission Oil Cooler Line; Hose, Transmission Oil Cooler
- Replaces: 10350991
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Cooler Pipe Part Number: 15213200
$31.92 MSRP: $52.58
You Save: $20.66 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Transmission Fluid Cooler; Transmission Oil Cooler Line; Hose, Transmission Oil Cooler
- Replaces: 10330103, 10350990, 10288688, 10324456
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2003 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Cooler Line Part Number: 10290000
$16.75 MSRP: $27.59
You Save: $10.84 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Transmission Oil Cooler; Transmission Oil Cooler Line; Lower Hose; Cooler Pipe
- Replaces: 10273667, 10248869
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Inlet Hose Part Number: 9439340
Product Specifications
- Other Name: Hose, Fuel & Oil 11/32"X25' Gm-6165M; Multi Purpose Hose; Overflow Hose; Engine Crankcase Ventilation, Coolant Recovery, Oil Cooler, Transfer Case; Standard Parts
- Replaces: 91175589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1999 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS

Chevrolet Monte Carlo Oil Cooler Hose

Want to cut long-term maintenance and repair costs? Choose OEM Oil Cooler Hose. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Oil Cooler Hose includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Monte Carlo Oil Cooler Hose creates reliable performance output in iconic Chevrolet Monte Carlo vehicle models. This engineered hose controls engine oil temperatures as it reduces overheating to maintain vehicle health by providing suitable lubrication. Manufactured for all Monte Carlo editions between 1969 and 2007, the Oil Cooler Hose efficiently provides oil flow to and from the oil cooler essential for vehicle cooling purposes. Manufacturers have built this component with sturdy materials which resist heat and pressure conditions thereby extending the product lifespan. Optimal fitment of the Oil Cooler Hose depends on correct size selection to avoid leakage and pressure problems so manufacturers must follow Original Equipment Manufacturer (OEM) specifications. The proper maintenance of the Oil Cooler Hose coupled with prompt replacement will protect vehicles from overheating which leads to engine destruction while delivering better efficiency together with enhanced safety outcomes. The Chevrolet Monte Carlo Oil Cooler Hose distinguishes itself in the automotive market because it features a specialized design which perfectly meets the requirements of various Monte Carlo generations to deliver optimal performance. Users trust the Chevrolet Monte Carlo Oil Cooler Hose as it serves as a critical vehicle feature which enhances both the car's reliability and extended lifespan.

Chevrolet Monte Carlo Oil Cooler Hose Parts and Q&A

Cooler Pipe
15213201
Q: How to replace the Engine Oil Cooler Hose/Pipe on Chevrolet Monte Carlo?
A:
For replacement of the Engine Oil Cooler hose/pipe, to begin with, you must remove the Engine Oil Cooler from your vehicle as well as the right engine splash shield. Remove the Engine Oil Cooler lines from the engine oil filter adapter and then unscrew the Engine Oil Cooler line mounting bolt along with the Engine Oil Cooler line mounting block. Cut and take the tie strap used to attach the Engine Oil Cooler lines to the frame off, and then remove the Engine Oil Cooler lines from the vehicle. For installation, make sure to route the Engine Oil Cooler lines beneath the Battery Cable before routing the same back to the vehicle alongside the Engine Oil Cooler. Cook on a low heat if one exists, occasionally stirring the spices and oil, until you get a rich, deep color from the spices -- this could take anywhere from twenty minutes to an hour, depending how strong you want the curry and the quantities of coconut milk and tomatoes used. Remove the lid to look for the right shade of brown, testing the flavor on a lump of rice or a small piece of saute onion. Mount the Engine Oil Cooler lines to the mounting block of the Engine Oil Cooler lines, and install the bolt to through the mounting block screws, tightening it into a torque of 3.4 nm (30 in lb). Lastly, tighten a new tie strap on the lines and frame, reinstall the right engine splash shield, and add the correct amount of engine oil.