How to replace the Electric Cooling Fan Motor on Chevrolet Monte Carlo?

The first step to replace the electric cooling Fan Motor requires disconnecting the negative Battery Cable for safety purposes. The j 38185 hose clamp pliers help technicians to detach the right and left engine mount struts and also the air cleaner assembly. The first step is to remove the transmission oil cooler lines from their bottom retainer clip at the cooling Fan Shroud and then take out the Fan Shroud bolts. You must first remove the bolt between the Fan Shroud and condenser hold down bracket before taking off the radiator upper brackets with their connecting bolts. Before removing the cooling Fan Shroud together with the heat shield users must disconnect and detach the engine fan electrical connector with its corresponding wiring. After removing the engine cooling Fan Blade nut you must uninstall the blade and check that damaged or bent fan blades receive replacement pieces to restore balance in the system. The inspection of cooling fan blades should be completed at this point before the removal of engine cooling Fan Motor bolts to extract the engine cooling Fan Motor from the Fan Shroud. Position the engine cooling Fan Motor inside the Fan Shroud and fasten it with the engine cooling Fan Motor bolts while torquing them to 6 nm (53 inch lbs.). Put the engine cooling Fan Blade along with its nut into place before securing them to 6 nm (53 inch lbs.). Then install the engine cooling fan heat shield. Set the lower border of the Fan Shroud to connect with the clip below the radiator before adding the cooling Fan Shroud and its bolts which must be tightened to 10 nm (89 inch lbs.). The cooling fan electrical harness requires reattachment to the Fan Shroud clips while connecting the electrical connector to the engine cooling Fan Motor. Position and tighten to 6 nm (53 inch lbs.) the bolt that links the Fan Shroud to the condenser hold down bracket before proceeding with radiator upper support bracket tightening to 10 nm (89 inch lbs.). After finishing reinstall the transmission oil cooler lines at the bottom of the cooling Fan Shroud attachment point and the air cleaner assembly and right and left engine mount struts before reconnecting the negative Battery Cable while ensuring proper system operation through inspection.

OEM Chevrolet Monte Carlo Fan Motor

Cooling Fan Motor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Fan Motors found

View related parts
Chevrolet Monte Carlo Fan Motor Part Number: 89018696
$125.97 MSRP: $258.88
You Save: $132.91 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 89018692
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Fan Motor Part Number: 89018695
$87.49 MSRP: $259.00
You Save: $171.51 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Fan & Motor Part Number: 22137318
$91.86 MSRP: $188.78
You Save: $96.92 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Fan Motor; Motor; Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 22120616, 22081940, 22092353
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Fan Motor, Driver Side Part Number: 22136897
$97.56 MSRP: $183.22
You Save: $85.66 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor; Motor Kit, Engine Air Cooling(Electrical)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Monte Carlo | LS | 6 Cyl 3.1 L GAS
View related parts
Chevrolet Monte Carlo Fan Motor Part Number: 89019111
$108.73 MSRP: $217.44
You Save: $108.71 (50%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 88956881
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | LS, LT, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Fan Motor Part Number: 22136414
$37.46 MSRP: $110.88
You Save: $73.42 (67%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Motor Kit, Engine Coolant Fan; Motor; Motor Kit, Engine Air Cooling(Electrical)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Fan Motor Part Number: 89018690
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Monte Carlo | LS, LT | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS
View related parts
Chevrolet Monte Carlo Fan Motor Part Number: 88890735
$107.26 MSRP: $191.54
You Save: $84.28 (44%)
Product Specifications
- Other Name: Motor Kit, Engine Coolant Fan; Motor; Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 12368631, 12368626, 12368622, 12367229, 22134444, 12368625, 22137037
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Fan Motor Part Number: 89019110
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 88987272
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | LS, LT, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Fan Motor Part Number: 89019109
Product Specifications
- Other Name: Motor Kit, Engine Air Cooling (Electrical); Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 88987271
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Monte Carlo | LS, LT, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Fan Motor Part Number: 88890707
Product Specifications
- Other Name: Motor Kit, Engine Coolant Fan; Motor; Motor Kit, Engine Air Cooling(Electrical)
- Replaces: 12368628, 22137035
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-1999 Chevrolet Monte Carlo | Indianapolis 500 Pace Car, LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Monte Carlo Fan Motor

Want to cut long-term maintenance and repair costs? Choose OEM Fan Motor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Fan Motor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Monte Carlo Fan Motor is very important part that is used in the Chevrolet Monte Carlo cars that are associated with high reliability and performance. This Fan Motor aids in the efficient working of the cooling fan to direct proper airflow to the radiators hence appropriate temperatures for the car engines. Through the years, a number of modifications were made to the Fan Motor of the Chevrolet Monte Carlo through accommodating the modern improvements and innovations in autos, hence increasing the performance and stability of the car. Designed for compatibility with various Monte Carlo models, namely the ones manufactured between 1969 and 2007, the Fan Motor contributes to the improvement of the model's efficiency and safety due to its ability to counter-engine overheating. Chevrolet Monte Carlo is considered to be one of the most luxurious and sport-oriented cars; however, many changes have occurred throughout the generations of cars, and one of the crucial aspects that always mattered is the Fan Motor. Some of the unique model specifications of Chevrolet Monte Carlo Fan Motor are durability and operation efficiency that reveal the performance of the engine. Apart from its role in cooling the engine this component insists the Chevrolet brand on quality and innovation. However, due to the research findings of the Chevrolet Monte Carlo Fan Motor, the automobile market has a special product that will let drivers have the splendid experience of Monte Carlo and at the same time make them worry-free about their automobile engines.

Chevrolet Monte Carlo Fan Motor Parts and Q&A

Fan Motor
89019111
Q: How to replace the Electric Cooling Fan Motor on Chevrolet Monte Carlo?
A:
The first step to replace the electric cooling Fan Motor requires disconnecting the negative Battery Cable for safety purposes. The j 38185 hose clamp pliers help technicians to detach the right and left engine mount struts and also the air cleaner assembly. The first step is to remove the transmission oil cooler lines from their bottom retainer clip at the cooling Fan Shroud and then take out the Fan Shroud bolts. You must first remove the bolt between the Fan Shroud and condenser hold down bracket before taking off the radiator upper brackets with their connecting bolts. Before removing the cooling Fan Shroud together with the heat shield users must disconnect and detach the engine fan electrical connector with its corresponding wiring. After removing the engine cooling Fan Blade nut you must uninstall the blade and check that damaged or bent fan blades receive replacement pieces to restore balance in the system. The inspection of cooling fan blades should be completed at this point before the removal of engine cooling Fan Motor bolts to extract the engine cooling Fan Motor from the Fan Shroud. Position the engine cooling Fan Motor inside the Fan Shroud and fasten it with the engine cooling Fan Motor bolts while torquing them to 6 nm (53 inch lbs.). Put the engine cooling Fan Blade along with its nut into place before securing them to 6 nm (53 inch lbs.). Then install the engine cooling fan heat shield. Set the lower border of the Fan Shroud to connect with the clip below the radiator before adding the cooling Fan Shroud and its bolts which must be tightened to 10 nm (89 inch lbs.). The cooling fan electrical harness requires reattachment to the Fan Shroud clips while connecting the electrical connector to the engine cooling Fan Motor. Position and tighten to 6 nm (53 inch lbs.) the bolt that links the Fan Shroud to the condenser hold down bracket before proceeding with radiator upper support bracket tightening to 10 nm (89 inch lbs.). After finishing reinstall the transmission oil cooler lines at the bottom of the cooling Fan Shroud attachment point and the air cleaner assembly and right and left engine mount struts before reconnecting the negative Battery Cable while ensuring proper system operation through inspection.