How to adjust the Cruise Control Switch and the stop lamp switch on Chevrolet Monte Carlo?

You need to remove the left side insulator panel as your first step for adjusting both cruise control release switch and stop lamp switch. First fully press the Brake Pedal and afterward position the switches into their retainers until they reach full engagement position. Press the Brake Pedal all the way to its stop then keep pulling it backward until you hear no more sounds. The cruise control release switch and the stop lamp switch contacts must activate at pedal movements between 3.5 to 12.5 mm (1/8 to 1/2 in) on the pad's centerline while stop lamp switch contacts trigger at 4.5 mm (3/16 in) beyond the cruise control release switch activation. Put back the left side insulator panel as the final step.

How to replace the cruise control switch on Chevrolet Monte Carlo?

In order to replace the cruise control release switch, position the ignition key in off or lock position, as well as ensure all electrical loads are off. If tools may come into contact with live, electrical terminals, disconnect the negative cable of the battery to avoid personal injury or vehicle damage. Be aware that vehicle is equipped with supplemental inflatable restraint (SIR) system and failure to follow procedure will result in air bag deployment, personal injury or unnecessary repairs. First remove the driver knee bolster panel and then disconnect the electrical connector from the cruise control cruise release switch and a switch out of the retainer in the brake pedal bracket. To install, return cruise control release switch to retainer, reconnect the electrical connector and then adjust the switch, and finally, install the driver side knee bolster panel.

OEM Chevrolet Monte Carlo Cruise Control Switch

Steering Wheel Cruise Control Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Cruise Control Switches found

View related parts
Chevrolet Monte Carlo Cruise Switch, Black, Driver Side Part Number: 15819309
$71.49 MSRP: $106.38
You Save: $34.89 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Cruise Control Selector; Engagement Switch; Set/Resume Switch; Switch
- Position: Driver Side
- Replaces: 15276855
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2007 Chevrolet Monte Carlo | LS, LT, LTZ, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Monte Carlo Switch, Driver Side Part Number: 10354249
Product Specifications
- Other Name: Switch, Cruise Control Selector; Switch, Steering Wheel; Switch, Radio Control
- Position: Driver Side
- Replaces: 12450088
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Switch, Passenger Side Part Number: 10354247
Product Specifications
- Other Name: Switch, Cruise Control Selector; Switch, Steering Wheel; Switch, Radio Control
- Position: Passenger Side
- Replaces: 12450089
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Switch Part Number: 10354246
Product Specifications
- Other Name: Switch, Cruise Control Selector
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Brake Switch Part Number: 22620888
$34.96 MSRP: $52.02
You Save: $17.06 (33%)
Product Specifications
- Other Name: Switch; Brake Light Switch; Clutch Switch; Release Switch; Stoplamp Switch; Cruise Control Selector; Transmission Safety Start/Warning Switch.
- Replaces: 22584374
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chevrolet Monte Carlo | LS, Z34 | 6 Cyl 3.1 L GAS, 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Release Switch Part Number: 10426455
Product Specifications
- Other Name: Switch, Cruise Control; Cruise Switch; Switch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2005 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, LT, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Monte Carlo Switch, Black Part Number: 10354248
Product Specifications
- Other Name: Switch Assembly-Cruise Control *Black; Switch, Cruise Control Selector
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Chevrolet Monte Carlo | LS, LS Competition, LS Sport, SS, SS 35th Anniversary Edition, SS Dale Earnhardt Signature Edition, SS High Sport, SS Pace Car | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS

Chevrolet Monte Carlo Cruise Control Switch

Want to cut long-term maintenance and repair costs? Choose OEM Cruise Control Switch. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Monte Carlo parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Monte Carlo Cruise Control Switch includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Monte Carlo Cruise Control Switch Parts and Q&A

Switch, Passenger Side
10354247
Q: How to adjust the Cruise Control Switch and the stop lamp switch on Chevrolet Monte Carlo?
A:
You need to remove the left side insulator panel as your first step for adjusting both cruise control release switch and stop lamp switch. First fully press the Brake Pedal and afterward position the switches into their retainers until they reach full engagement position. Press the Brake Pedal all the way to its stop then keep pulling it backward until you hear no more sounds. The cruise control release switch and the stop lamp switch contacts must activate at pedal movements between 3.5 to 12.5 mm (1/8 to 1/2 in) on the pad's centerline while stop lamp switch contacts trigger at 4.5 mm (3/16 in) beyond the cruise control release switch activation. Put back the left side insulator panel as the final step.
Switch, Driver Side
10354249
Q: How to replace the cruise control switch on Chevrolet Monte Carlo?
A:
In order to replace the cruise control release switch, position the ignition key in off or lock position, as well as ensure all electrical loads are off. If tools may come into contact with live, electrical terminals, disconnect the negative cable of the battery to avoid personal injury or vehicle damage. Be aware that vehicle is equipped with supplemental inflatable restraint (SIR) system and failure to follow procedure will result in air bag deployment, personal injury or unnecessary repairs. First remove the driver knee bolster panel and then disconnect the electrical connector from the cruise control cruise release switch and a switch out of the retainer in the brake pedal bracket. To install, return cruise control release switch to retainer, reconnect the electrical connector and then adjust the switch, and finally, install the driver side knee bolster panel.