How to Replace the Radiator Fan and Fan Shroud for LZ4 and LZ9 on Chevrolet Malibu?

Draining coolant into a drain pan is the first step for replacing Radiator fan and shroud units on models lz4 and lz9. Semiconductor cooling begins by taking off both headlamps before disassociating the upper transmission oil cooler pipe from the Radiator. The condenser upper tabs require a rope which should then be secured to the upper tie bar. Remove first the upper Radiator support brackets by taking off their bolts before extracting the brackets completely. You should pry the fan shroud tabs upward at the Radiator clips before lifting the vehicle. First remove the retainers and deflector from the lower Radiator air deflectors before taking out the right front fender liner together with right and left Radiator air deflectors and their retainers. Make use of hose clamp pliers (J 38185) to reposition the Radiator outlet hose clamp before removing the outlet hose from the Radiator at its position. Reposition the Radiator outlet hose clamp at the Radiator using hose clamp pliers (J 38185) before removing the lower Radiator support bracket bolts and disconnecting fan wire harness connectors and lower Radiator support brackets. A drain pan should be placed under the transmission oil cooler pipes before proceeding with the removal of the attachment nut from the transmission and both pipes and the clip from the fan shroud. The technician should extract both the lower transmission oil cooler pipe from the Radiator and the transmission oil cooler pipes. Disassemble the fan piece by disconnecting its wire harness connectors. When installing the equipment begin by repositioning the fan shroud assembly followed by transmission oil cooler pipe installation. Reposition the lower transmission oil cooler pipe on the Radiator followed by fan shroud clip installation and both pipes need to be connected to the transmission with an attachment nut torqued to 7 n.m (62 lb in). Position the Radiator air side seals correctly before placing the lower Radiator support brackets and their bolts at 60 n.m (44 lb ft). Relink the fan wire harness connectors alongside the Radiator outlet hose after repositioning the clamp through the use of hose clamp pliers (J 38185). After installing retainers on the left and right Radiator air deflectors it is necessary to secure the right front fender liner and lower Radiator air deflector with its retainers in place. Next lower the vehicle until you can install the fan shroud tabs into the Radiator clips followed by removing the rope from the condenser and upper tie bar. Tighten the bolts of upper Radiator support brackets to 10 n.m but avoid twisting the upper bracket while installation. Put the upper transmission oil cooler pipe in place on the Radiator and afterward reattach the headlamps before filling coolant and checking transmission fluid quantities.

OEM Chevrolet Malibu Radiator fan

Radiator Cooling Fan

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Radiator fans found

View related parts
Chevrolet Malibu Fan Assembly Part Number: 84297686
$266.60 MSRP: $478.19
You Save: $211.59 (45%)
ADD TO CART
Product Specifications
- Other Name: Fan Assembly-Engine Cooler; Radiator Fan Assembly; Fan, Engine Air Cooling(Electrical)
- Replaced by: 86828268
- Replaces: 84020224, 23336313
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2019 Chevrolet Malibu | Hybrid | 4 Cyl 1.8 L FULL HYBRID EV-GAS (FHEV)
View related parts
Chevrolet Malibu Fan Blade, Driver Side Part Number: 20757669
$7.80 MSRP: $14.64
You Save: $6.84 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Malibu | Base, Classic LS, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Fan Assembly Part Number: 86828264
$397.94 MSRP: $720.26
You Save: $322.32 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly-Engine Cooler; Fan Module; Fan, Engine Air Cooling(Electrical)
- Replaces: 84297679, 84000787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2021 Chevrolet Malibu | L, LS, LT, Premier | 4 Cyl 1.5 L GAS, 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Fan Assembly Part Number: 86828263
$315.41 MSRP: $648.16
You Save: $332.75 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly-Engine Cooler; Fan Module; Fan, Engine Air Cooling(Electrical)
- Replaces: 23379854, 84297662, 84000785
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2020 Chevrolet Malibu | L, LS, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Malibu Fan Assembly Part Number: 85109578
$245.12 MSRP: $503.72
You Save: $258.60 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly-Engine Cooler; Fan Module; Fan, Engine Air Cooling(Electrical)
- Replaced by: 42905494
- Replaces: 84523873
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Malibu | L, LS, LT, RS | 4 Cyl 1.5 L GAS
View related parts
Chevrolet Malibu Fan Assembly Part Number: 85109577
$268.74 MSRP: $504.68
You Save: $235.94 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Assembly-Engine Cooler; Fan, Engine Air Cooling(Electrical)
- Replaces: 84523874
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 Chevrolet Malibu | Premier | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Malibu Fan Blade, Passenger Side Part Number: 20970657
$131.97 MSRP: $390.63
You Save: $258.66 (67%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Engine Air Cooling; Dual Radiator and Condenser Assembly; Cooling Fan Assembly; Fan & Motor; Fan, Engine Air Cooling(Electrical)
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Fan Blade, Driver Side Part Number: 20970656
$190.09 MSRP: $390.63
You Save: $200.54 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Engine Air Cooling; Dual Radiator and Condenser Assembly; Cooling Fan Assembly; Fan & Motor; Fan, Engine Air Cooling(Electrical)
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Fan Blade Part Number: 20757670
$45.00 MSRP: $84.50
You Save: $39.50 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2012 Chevrolet Malibu | Classic LS, Classic LT, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Fan Blade, Passenger Side Part Number: 20757668
$6.54 MSRP: $11.69
You Save: $5.15 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Blade Kit, Engine Cooling; Radiator Fan Assembly
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Malibu | Base, Classic LS, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Fan Blade, Green Line Part Number: 15788745
$173.83 MSRP: $357.22
You Save: $183.39 (52%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan, Engine Air Cooling; Dual Radiator and Condenser Assembly; Cooling Fan Assembly; Fan Assembly; Fan Module; Fan, Engine Air Cooling(Electrical)
- Replaces: 15254643, 22713868, 15236647
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2012 Chevrolet Malibu | Base, Classic LS, Hybrid, LS, LT, LTZ, Maxx, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Chevrolet Malibu Fan Blade Part Number: 12362564
$42.34 MSRP: $79.52
You Save: $37.18 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Fan Kit, Engine Air Cooling; Dual Radiator and Condenser Fan Assembly; Radiator Fan Assembly.; Fan Kit, Engine Air Cooling(Electrical)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Fan Blade Part Number: 22719384
Product Specifications
- Other Name: Fan Assembly; Dual Radiator and Condenser Fan Assembly; Dual Radiator Condenser Fan Assembly; Radiator Fan Assembly; Fan Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2010 Chevrolet Malibu | Classic LS, Classic LT, LS, LT, LTZ, Maxx LS, Maxx LT, Maxx LTZ, Maxx SS, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L GAS

Chevrolet Malibu Radiator fan

Want to cut long-term maintenance and repair costs? Choose OEM Radiator fan. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Malibu parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Malibu Radiator fan includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Radiator Fan in Chevrolet Malibu is functional and crucial as it helps in distribution of air across the radiator with a view of cooling down the temperate of the engine. When the vehicle is stopped, or moving slowly, a fan comes into play to maintain forced convection akin to the normal velocity air movement that would otherwise occur to cool the coolant before it is circulated back to the engine. Chevrolet Malibu models are equipped with both mechanical and electric Radiator Fans. Mechanical fans are usually built in the water pump shaft; they connect through a thermal clutch to save noise and fuel and to disconnect at high rpm. On the other hand electric fans whose power source is a 12V motor work by using coolant temperature and air conditioning requirements to switch on and maintain a constant flow of air as required. To improve the circulation of air around the radiator each kind of fan is encased within a shroud; the major difference is the manner of their function and performance at various driving scenarios.

Chevrolet Malibu Radiator fan Parts and Q&A

Fan Blade, Passenger Side
20757668
Q: How to Replace the Radiator Fan and Fan Shroud for LZ4 and LZ9 on Chevrolet Malibu?
A:
Draining coolant into a drain pan is the first step for replacing Radiator fan and shroud units on models lz4 and lz9. Semiconductor cooling begins by taking off both headlamps before disassociating the upper transmission oil cooler pipe from the Radiator. The condenser upper tabs require a rope which should then be secured to the upper tie bar. Remove first the upper Radiator support brackets by taking off their bolts before extracting the brackets completely. You should pry the fan shroud tabs upward at the Radiator clips before lifting the vehicle. First remove the retainers and deflector from the lower Radiator air deflectors before taking out the right front fender liner together with right and left Radiator air deflectors and their retainers. Make use of hose clamp pliers (J 38185) to reposition the Radiator outlet hose clamp before removing the outlet hose from the Radiator at its position. Reposition the Radiator outlet hose clamp at the Radiator using hose clamp pliers (J 38185) before removing the lower Radiator support bracket bolts and disconnecting fan wire harness connectors and lower Radiator support brackets. A drain pan should be placed under the transmission oil cooler pipes before proceeding with the removal of the attachment nut from the transmission and both pipes and the clip from the fan shroud. The technician should extract both the lower transmission oil cooler pipe from the Radiator and the transmission oil cooler pipes. Disassemble the fan piece by disconnecting its wire harness connectors. When installing the equipment begin by repositioning the fan shroud assembly followed by transmission oil cooler pipe installation. Reposition the lower transmission oil cooler pipe on the Radiator followed by fan shroud clip installation and both pipes need to be connected to the transmission with an attachment nut torqued to 7 n.m (62 lb in). Position the Radiator air side seals correctly before placing the lower Radiator support brackets and their bolts at 60 n.m (44 lb ft). Relink the fan wire harness connectors alongside the Radiator outlet hose after repositioning the clamp through the use of hose clamp pliers (J 38185). After installing retainers on the left and right Radiator air deflectors it is necessary to secure the right front fender liner and lower Radiator air deflector with its retainers in place. Next lower the vehicle until you can install the fan shroud tabs into the Radiator clips followed by removing the rope from the condenser and upper tie bar. Tighten the bolts of upper Radiator support brackets to 10 n.m but avoid twisting the upper bracket while installation. Put the upper transmission oil cooler pipe in place on the Radiator and afterward reattach the headlamps before filling coolant and checking transmission fluid quantities.