How to service and repair the control arm bushing on Chevrolet Malibu?

First remove the lower Control Arm from its position then maintain it inside a vice through secure retention. The threads of j 21474-19 (Nut) need to receive an application of j 23444 a (or an equivalent high pressure lubricant). Begin the tool assembly process with j 21474-19 (Nut) alongside the remover/installer from the j 41397 (Lower Control Arm Bushings Remover/Installer) and the receiver from the j 41397 and j 21474-18. Use j 21474-18 to achieve front bushing removal from the Control Arm before disassembling all tools. The assembly of bushing removal tools includes j 21474-27 along with its j 41211 (Front Control Arm Bushing Kit) remover/installer and j 41211 receiver and j 21474-4. Use j 21474-27 to tighten the receiver while removing the rear bushing from the Control Arm before disassembling all tools. For assembly install the rear bushing into the Control Arm after applying j 23444 a (or equivalent high pressure lubricant) to threads of j 21474-27. Initialize the bushing installation tools with j 21474-27 and the receiver/installer from j 41211 together with the receiver from j 41211 and j 21474-4. When the rear bushing seats within the Control Arm fully tighten j 21474-4 and remove all tools. The front bushing's outer casing receives lubrication before insertion into the Control Arm. Bushings receive installation tools that include j 21474-19 combined with j 41397's remover/installer alongside its receiver and j 21474-18. Use j 21474-19 to tighten it across the front bushing until the Control Arm fully receives the bushing. Then remove both tools. After completion install the lower Control Arm.

How to replace the front lower control arm bushing on Chevrolet Malibu?

The vehicle should be lifted before support while performing this repair. Start by removing both the tire with its wheel and then proceed to remove the lower Control Arm. Next the mechanic removes the lower Control Arm to rear bushing bolt carefully tracking the bushing's original position before removing it from the Control Arm. Install the new bushing onto the lower Control Arm following previously described installation steps. Preapply locktite(TM) 234 or an equivalent product on the bolt threads before installing the lower Control Arm to bushing bolt. Avoid vehicle damage during fastener installation steps. When tightening the rear bushings to Control Arm Bolt maintain a torque of 44 nm (32 lb ft) while holding the inner sleeve of the rear bushing. Lower Control Arm installation follows tire and wheel placement and vehicle lowering.

OEM Chevrolet Malibu Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Control Arm Bushings found

View related parts
Chevrolet Malibu Lower Control Arm Rear Bushing Part Number: 84008847
$43.13 MSRP: $74.07
You Save: $30.94 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing-Front Lower Control Arm Rear; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Lower
- Replaces: 23121594, 20835938, 22854824
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Lower Control Arm Bushing, Front Part Number: 22610297
$3.05 MSRP: $4.83
You Save: $1.78 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Lower Control Arm Rear Bushing; Bushings
- Position: Front Lower
- Replaced by: 22710854
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Rear Bushings Part Number: 13318343
$40.63 MSRP: $63.65
You Save: $23.02 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Control Arm Bushing; Axle Beam Mount; Rear Upper Control Arm Outer Bushing; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Lower Control Arm Bushing, Front Part Number: 22645684
$18.81 MSRP: $37.76
You Save: $18.95 (51%)
ADD TO CART
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Front Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Malibu Control Arm Bracket, Front Lower Part Number: 22997286
$92.94 MSRP: $215.91
You Save: $122.97 (57%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing, Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10379327, 22730777
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2012 Chevrolet Malibu | Hybrid, LS, LT, LTZ | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L FULL HYBRID EV-GAS (FHEV), 4 Cyl 2.4 L GAS, 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Malibu Control Arm Bushing, Rear Part Number: 22927294
$17.82 MSRP: $29.34
You Save: $11.52 (40%)
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Rear Suspension Control Arm; Axle Beam Mount; Trailing Arm Bushing; Front Upper Control Arm Bushing; Bushings; Bushing, Rear Axle Control Arm
- Position: Rear
- Replaces: 13219149
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Control Arm Bushing, Rear Part Number: 13219169
$20.34 MSRP: $33.50
You Save: $13.16 (40%)
ADD TO CART
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Axle Support Bushing; Axle Beam Mount; Lower Control Arm Inner Bushing; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2013-2015 Chevrolet Malibu | Eco, LS, LT, LTZ | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L GAS
View related parts
Chevrolet Malibu Trailing Arm Bushing, Rear Part Number: 22611479
Product Specifications
- Other Name: Bushing, Rear Axle Control Arm; Knuckle Bushing; Trailing Arm Rear Bushing; Bushings
- Position: Rear
- Replaces: 22659343
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2003 Chevrolet Malibu | Base, LS | 4 Cyl 2.4 L GAS, 6 Cyl 3.1 L GAS

Chevrolet Malibu Control Arm Bushing

Want to cut long-term maintenance and repair costs? Choose OEM Control Arm Bushing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Malibu parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Malibu Control Arm Bushing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Malibu Control Arm Bushing is one of the central pieces of the suspension system of the Chevrolet Malibu, well-known for its quality and speed. This bushing reduces the shocks between the control arm and the vehicle frame thus providing the vehicle with a smooth ride and precise handling capacity. Fitted to many of the Chevrolet Malibu models, the Control Arm Bushing helps increase efficiency, while also improving vehicular safety by allowing the control arms to move freely in accordance with road and steering information. In the Chevrolet Malibu Control Arm Bushing, the types of materials that are used include rubber, polyurethane, and synthetic elastomers, which are carefully chosen to meet the performance and endurance of the vehicle as per the client's usage. In particular, the transformation of body types of the Chevrolet Malibu, where the car switched from rear-wheel drive to front-wheel drive, it can be noted that the Control Arm Bushing for this car is adjustable for both the engine and the transmission. Extra qualities like improvement of the insulation level and the application of the great material science make the Chevrolet Malibu Control Arm Bushing unique in the automotive industry, promising the durability and great characteristics of stearing. Thus, adjusting the wheel alignment and minimizing any extraneous movement, the Control Arm Bushing plays a major role in Malibu's driving characteristics and makes Chevrolet the brand drivers can trust when they are in need of reliable and efficient vehicles.

Chevrolet Malibu Control Arm Bushing Parts and Q&A

Lower Control Arm Bushing, Front
22610297
Q: How to service and repair the control arm bushing on Chevrolet Malibu?
A:
First remove the lower Control Arm from its position then maintain it inside a vice through secure retention. The threads of j 21474-19 (Nut) need to receive an application of j 23444 a (or an equivalent high pressure lubricant). Begin the tool assembly process with j 21474-19 (Nut) alongside the remover/installer from the j 41397 (Lower Control Arm Bushings Remover/Installer) and the receiver from the j 41397 and j 21474-18. Use j 21474-18 to achieve front bushing removal from the Control Arm before disassembling all tools. The assembly of bushing removal tools includes j 21474-27 along with its j 41211 (Front Control Arm Bushing Kit) remover/installer and j 41211 receiver and j 21474-4. Use j 21474-27 to tighten the receiver while removing the rear bushing from the Control Arm before disassembling all tools. For assembly install the rear bushing into the Control Arm after applying j 23444 a (or equivalent high pressure lubricant) to threads of j 21474-27. Initialize the bushing installation tools with j 21474-27 and the receiver/installer from j 41211 together with the receiver from j 41211 and j 21474-4. When the rear bushing seats within the Control Arm fully tighten j 21474-4 and remove all tools. The front bushing's outer casing receives lubrication before insertion into the Control Arm. Bushings receive installation tools that include j 21474-19 combined with j 41397's remover/installer alongside its receiver and j 21474-18. Use j 21474-19 to tighten it across the front bushing until the Control Arm fully receives the bushing. Then remove both tools. After completion install the lower Control Arm.
Control Arm Bracket, Front Lower
22997286
Q: How to replace the front lower control arm bushing on Chevrolet Malibu?
A:
The vehicle should be lifted before support while performing this repair. Start by removing both the tire with its wheel and then proceed to remove the lower Control Arm. Next the mechanic removes the lower Control Arm to rear bushing bolt carefully tracking the bushing's original position before removing it from the Control Arm. Install the new bushing onto the lower Control Arm following previously described installation steps. Preapply locktite(TM) 234 or an equivalent product on the bolt threads before installing the lower Control Arm to bushing bolt. Avoid vehicle damage during fastener installation steps. When tightening the rear bushings to Control Arm Bolt maintain a torque of 44 nm (32 lb ft) while holding the inner sleeve of the rear bushing. Lower Control Arm installation follows tire and wheel placement and vehicle lowering.