How to service the tail light on Chevrolet Impala?

Service the tail lamp by first opening the rear compartment and then disconnecting the rear compartment convenience net. First remove the wingnut then pull back the rear compartment trim panel from the tail lamp to expose the tail lamp. After exposing the tail lamp use additional wingnuts to detach it from the rear body panel. Begin by unscrewing the tail lamp socket counterclockwise before removing the bulb from within it. Disconnect the electrical connector from the tail lamp first. The sidemarker lamp socket requires counterclockwise rotation before you can remove its bulb from inside. Installation of the bulbs begins by putting the tail lamp bulb inside its socket first followed by the sidemarker bulb socket. First turn the sidemarker lamp socket clockwise and then screw the tail lamp socket clockwise for installation. The electrical connector powering the tail lamp must be connected next followed by putting back the tail lamp onto the rear body panel with wingnut security. To install the wingnut and convenience net, pull the rear compartment trim panel into position against the tail lamp before securing the wingnut and finishing by locking the convenience net and firmly closing the rear compartment.

How to replace the Tail Light on Chevrolet Impala?

A successful repair of impala tail lamps starts with opening the rear compartment and removing the wingnut to expose the rear compartment trim panel from the tail lamp. To begin, unscrew the wingnuts which attach the tail lamp to the rear body panel and remove the tail lamp from its mounted position. First disconnect the electrical connector from the tail lamp followed by turning the tail lamp socket counterclockwise to remove both socket and bulb from the connector. Following the same procedure extract the bulb by turning the sidemarker lamp socket counterclockwise. To begin the installation process start by putting the bulb into the tail lamp socket before placing it into the sidemarker lamp socket. Follow installation by turning the side marker lamp socket clockwise and then continue by turning the tail lamp socket. Begin by reconnecting the electrical tail lamp connector. Once complete reposition the tail lamp to the rear body panel and secure with wingnuts. End your work by placing the wingnut into position inside the rear compartment area. Close this area afterwards.

OEM Chevrolet Impala Tail Light

Tail Lamp

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Tail Lights found

View related parts
Chevrolet Impala Tail Lamp Assembly, Passenger Side Part Number: 25971598
$162.34 MSRP: $242.72
You Save: $80.38 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 15873297, 25880344, 25853830, 15826709
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Driver Side Part Number: 25971597
$198.02 MSRP: $296.06
You Save: $98.04 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly-Tail; Tail Light Assembly; Back Up Light; Tail Lamps; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 15873298, 25880343, 25853831, 15826710
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2013 Chevrolet Impala | 50th Anniversary Edition, LS, LT, LTZ, Police, SS | 6 Cyl 3.5 L FLEX, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Passenger Side Part Number: 19169009
$125.83
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly, Tail; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 10335608, 10437573, 05978182, 5978182, 10318833
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Rear Driver Side Part Number: 84527172
$247.33 MSRP: $368.21
You Save: $120.88 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp, Rear Stop; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Rear Driver Side
- Replaces: 22964657, 23405238, 23148680, 84247728, 23462382
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Rear Passenger Side Part Number: 84527171
$264.46 MSRP: $393.81
You Save: $129.35 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp, Rear Stop; Tail Light; Lamp, Tail Lamp
- Position: Rear Passenger Side
- Replaces: 22964658, 23405237, 23462381, 84247727, 23148681
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Rear Driver Side Part Number: 84043113
$166.97 MSRP: $248.07
You Save: $81.10 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly-Rear Combination; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Rear Driver Side
- Replaces: 23405235, 20953474
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Rear Passenger Side Part Number: 84043112
$179.82 MSRP: $267.27
You Save: $87.45 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly-Rear Combination; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Rear Passenger Side
- Replaces: 20953475, 23405236
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2020 Chevrolet Impala | Eco, LS, LT, LTZ, Premier | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 4 Cyl 2.5 L FLEX, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L BI-FUEL, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Passenger Side Part Number: 19169011
$73.58 MSRP: $105.29
You Save: $31.71 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly, Tail; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Replaces: 10351922
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Impala | Base, LS, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Driver Side Part Number: 19169010
$78.08 MSRP: $116.21
You Save: $38.13 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly, Tail; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 10351923
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Impala | Base, LS, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Driver Side Part Number: 19169008
$100.66 MSRP: $158.31
You Save: $57.65 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Lamp Assembly, Tail; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Replaces: 05978181, 10335607, 10437572, 5978181, 10318834
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2000-2004 Chevrolet Impala | Base, LS, LS Sport, SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Passenger Side Part Number: 5977448
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Driver Side Part Number: 5977447
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Passenger Side Part Number: 5977354
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS
View related parts
Chevrolet Impala Tail Lamp Assembly, Driver Side Part Number: 5977353
Product Specifications
- Other Name: Lamp Assembly-Tail; Back Up Light; Tail Light; Lamp, Tail Lamp
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994-1996 Chevrolet Impala | SS | 8 Cyl 5.7 L GAS

Chevrolet Impala Tail Light

Want to cut long-term maintenance and repair costs? Choose OEM Tail Light. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Impala parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Impala Tail Light includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Impala Tail Light is a very significant part of the auto that speaks a lot about the vehicle's dependability as well as practical application. Being one of the most important safety features the Tail Light provides the light required at the rear of the Chevrolet Impala so that the drivers from the rear can determine how large the car is and how close it is from them, and also to be able to indications that the car is stopping or turning. In the issue of the Tail Light, the Chevrolet Impala has always been associated with changes and improvements in the type of lights used, including both the conventional incandescent type, as well as the LED and fiber optic types. First, it is necessary to consider compatibility with different models of Impala, also for each Tail Light it is necessary reaching safety standards and include the obligatory rear position lamps and stop lamps. It is noteworthy to mention that besides increasing the performance of the Chevrolet Impala, such concentration does make a lot for increasing road safety. Thus, the Tail Light adds extra options such as Euro or Altezza designs to the Chevrolet Impala stylish vehicle and make it even more unique and functional to mark the owners' personalities. Being an Engineering driven company, Chevrolet has built the Impala Tail Light to be a perfect reflection of the company's engineering prowess and creativity thereby making the tail light to be a master piece that adds value to the car's performance. All through the provision of better lighting for the road, city and highway, the Chevrolet Impala Tail Light contributes fully to safety and performance thereby establishing the Impala full-sized sedan as a trusted car.

Chevrolet Impala Tail Light Parts and Q&A

Tail Lamp Assembly, Driver Side
19169008
Q: How to service the tail light on Chevrolet Impala?
A:
Service the tail lamp by first opening the rear compartment and then disconnecting the rear compartment convenience net. First remove the wingnut then pull back the rear compartment trim panel from the tail lamp to expose the tail lamp. After exposing the tail lamp use additional wingnuts to detach it from the rear body panel. Begin by unscrewing the tail lamp socket counterclockwise before removing the bulb from within it. Disconnect the electrical connector from the tail lamp first. The sidemarker lamp socket requires counterclockwise rotation before you can remove its bulb from inside. Installation of the bulbs begins by putting the tail lamp bulb inside its socket first followed by the sidemarker bulb socket. First turn the sidemarker lamp socket clockwise and then screw the tail lamp socket clockwise for installation. The electrical connector powering the tail lamp must be connected next followed by putting back the tail lamp onto the rear body panel with wingnut security. To install the wingnut and convenience net, pull the rear compartment trim panel into position against the tail lamp before securing the wingnut and finishing by locking the convenience net and firmly closing the rear compartment.
Tail Lamp Assembly, Passenger Side
19169009
Q: How to replace the Tail Light on Chevrolet Impala?
A:
A successful repair of impala tail lamps starts with opening the rear compartment and removing the wingnut to expose the rear compartment trim panel from the tail lamp. To begin, unscrew the wingnuts which attach the tail lamp to the rear body panel and remove the tail lamp from its mounted position. First disconnect the electrical connector from the tail lamp followed by turning the tail lamp socket counterclockwise to remove both socket and bulb from the connector. Following the same procedure extract the bulb by turning the sidemarker lamp socket counterclockwise. To begin the installation process start by putting the bulb into the tail lamp socket before placing it into the sidemarker lamp socket. Follow installation by turning the side marker lamp socket clockwise and then continue by turning the tail lamp socket. Begin by reconnecting the electrical tail lamp connector. Once complete reposition the tail lamp to the rear body panel and secure with wingnuts. End your work by placing the wingnut into position inside the rear compartment area. Close this area afterwards.