Removing Starter motor for rpos lze/lz4/lz9 require an initial task to disconnect individual negative
Battery Cable and then the removal of all front lower air deflector panel and torque converter cover. Next, remove the Starter solenoid bat terminal nut, the positive Battery Cable terminal and the engine harness terminal from the Starter, after which you have to take off the Starter motor electrical connector. Turn the Starter bolts and remove the Starter. For addition, align the Starter motor to its engine location, and tighten its Starter bolts to 43 n.m (32 lb ft). Connect the Starter motor electrical connector , the engine harness terminal and positive Battery Cable terminal to the Starter with the positive Battery Cable terminal anti-rotation feature turned to the correct direction. Mount the Starter solenoid bat terminal nut to the Starter motor and fasten it to 10 n.m (89 lb in). Lastly, replace the torque converter covers, the front lower air deflector panel, and reconnect the negative Battery Cable.