Other Name: Mount, Transmission Mounting; Transfer Case Mount
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2006-2009 Chevrolet Express 3500 | Base | 8 Cyl 6.6 L DIESEL
| Page 1 of 2 |Next >
1-20 of 28 Results
Chevrolet Express 3500 Motor And Transmission Mount
Want to cut long-term maintenance and repair costs? Choose OEM Motor And Transmission Mount. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Express 3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Express 3500 Motor And Transmission Mount includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
Chevrolet Express 3500 Motor And Transmission Mount Parts and Q&A
Q: How to replace the Motor and Transmission Mount on a 4L80-E/4L85-E on Chevrolet Express 3500?
A:
You should start the transmission mount replacement process by first elevating and stabilizing the vehicle and using a transmission jack to stabilize the transmission afterward. Start by removing the transmission support followed by the transmission mount bolts for RWD vehicles and then the 4WD vehicle bolts before extracting the transmission mount from the vehicle. Start with the new transmission mount installation following instructions found inside the Service Precautions Fastener Notice. Install the transmission mount mounting bolts for 4WD vehicles and tighten them to 50 Nm (37 ft. lbs.)Finally install RWD mounting bolts and torque them to match the specified level. Reinstall the transmission support and remove the transmission jack after which you should lower the vehicle.
Q: How to service and repair the Motor and Transmission Mount on Chevrolet Express 3500?
A:
First, to service and repair the transmission mount, one supports the Transmission Assembly with a proper transmission stand. Get the bolts and washers out of the rear Engine Mount and lift the transmittance assembly slightly for removal of the rear Engine Mount that should be removed. For installation, install the rear Engine Mount to the transmission while following the fastener notice in service precautions. Install the rear Engine Mount bolts and tighten them to 47 nm (35 ft. Lbs.). Lower the rear of the engine and mount the rear Engine Mount to the nut & washer, then tighten these bolts to a torque specification of 47nm (35 ft. Lbs.). Finally, take off the transmission stand and lower the vehicle.