Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2024 Chevrolet Express 3500 | Base, LS, LT | 4 Cyl 2.8 L DIESEL, 6 Cyl 4.3 L FLEX, 6 Cyl 4.3 L GAS, 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 6.6 L DIESEL, 8 Cyl 6.6 L GAS, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
Other Name: Antenna Assembly-Radio Power; Antenna; Antenna, Power Radio Antenna
Replaces: 15989919
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
1996-2002 Chevrolet Express 3500 | Base, LS | 6 Cyl 4.3 L GAS, 8 Cyl 5.7 L BI-FUEL, 8 Cyl 5.7 L CNG, 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL, 8 Cyl 7.4 L GAS, 8 Cyl 8.1 L GAS
Chevrolet Express 3500 Antenna
Want to cut long-term maintenance and repair costs? Choose OEM Antenna. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Express 3500 parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Express 3500 Antenna includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.
Q: How to replace the power antenna mast on Chevrolet Express 3500?
A:
To change the power Antenna mast step one is to remove the upper Antenna mast mounting nut. Turn the ignition to on and the radio on. Ask a helper to follow the Antenna mast as it extends out from the Antenna assembly, and then tug the Antenna mast from the Antenna assembly and out of the vehicle. To install, stick the Antenna mast to the vehicle first. Put the plastic cable in to the Antenna assembly while the radio is on by putting the serrated side of the cable touching the power anthenna motor while inserting it till you meet some resistance. Turn off the radio and help channeling the plastic cable and mast into the Antenna Base. If the plastic cable is not retracting into the Antenna housing, turn the cable clockwise or counterclockwise modes till it retracts. Lastly, fill the mast section into the Antenna housing with hooks into the upper Antenna mounting nut and tighten to 6 n.m (53 lb in).
Q: How to ensure proper operation of the radio and the power antenna through cleaning on Chevrolet Express 3500?
A:
Regular antenna maintenance requires following this procedure: start with the ignition switch at on, run, acc, or accessory followed by turning on the radio to reach full antenna mast extension. Wet a soft cloth with a grease cleaning solvent of mineral spirits together with rubbing alcohol or tar remover to clean each section of the mast while paying special attention to the joint areas. Once you turn the radio power off you should turn it back on to make the antenna extend and retract before repeating this cleaning routine twice more.