To replace the upper
Control Arm bushings, firstly, lift the vehicle and secure it on appropriate safety stands while supporting the lower Control Arm. Take off the tire and wheel assembly as well as the upper Control Arm from the vehicle. Use the tool from ball joint remover/installer set (J9519-E) and particularly the tool (J9519-17), and remove the upper Control Arm bushings out from the Control Arm and take the tool out. Replace the wear-inspected bushings in the Control Arm with the new ones to ensure they are at their proper place. Next, install the Control Arm bushings using the tool (J9519-23) and it to the Control Arm and remove. Replace the upper Control Arm to the vehicle and then the tire and wheels assembly. Lastly, take away the safety stands, lower the vehicle, and inspect the wheel alignment.