How to replace the cooling fan and fan shroud on Chevrolet Equinox?

Replacing cooling fan and shroud requires beginning with front fascia removal and coolant drain. You must disconnect the electric connections that operate the fan motors while unclipping the wire harness attached to the fan assembly. To proceed with the condenser Radiator fan module (CRFM) replacement you must remove both panel retainers and then the closeout panel from the condenser. Remove first the crfm mounting bracket bolts then detach the mounting brackets from the Radiator support. Start by disconnecting the antenna cable at the Radiator inlet and removing the clamp and hose from the Radiator and then unclip the transmission cooler lines and disconnect the upper line. The crfm assembly should be lifted up from its lower mounts while the top section gets tipped forward and the bottom section gets moved backward until all fan assembly bolts can be removed for removing the crfm from the Radiator. Install the fan assembly onto the Radiator by guiding it correctly and verify that lower tabs fit into the hooks before tightening fan assembly bolts to 8 nm (71 inch lbs.). After placing the crfm assembly on lower mounts install the Radiator inlet hose by clamping it. Attach the transmission cooler lines onto the fan assembly before linking the upper transmission cooler line to the Radiator. Attach the crfm mounting brackets along with bolts to the Radiator support before securing them to 8 nm (71 inch lbs.). When you install the crfm closeout panel you should also attach its retainers to the condenser while connecting electrical connectors to fan motors and hooking transmission cooler lines and engine wire harness to the fan assembly. The completion of the installation process includes reattaching the front fascia along with filling the cooling system.

OEM Chevrolet Equinox Fan Shroud

Radiator Fan Shroud

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Fan Shrouds found

View related parts
Chevrolet Equinox Fan Shroud Part Number: 89024963
$167.35 MSRP: $263.19
You Save: $95.84 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud Kit, Engine Electrical Coolant Fan; Dual Radiator and Condenser Fan Assembly; Shroud; Shroud Kit, Radiator Fan Shroud
- Replaces: 89022510
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005 Chevrolet Equinox | LS, LT | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Fan Shroud Part Number: 84145767
$262.05 MSRP: $391.71
You Save: $129.66 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud; Dual Radiator and Condenser Fan Assembly; Cooling Fan Assembly
- Replaces: 25952785
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | L, LS, LT, LTZ, Premier | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Equinox Fan Shroud Part Number: 25952783
$336.28 MSRP: $502.67
You Save: $166.39 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud, Radiator Fan Shroud; Dual Radiator and Condenser Fan Assembly; Cooling Fan Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2017 Chevrolet Equinox | LT, LTZ, Premier | 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Fan Shroud Part Number: 19130231
$154.24 MSRP: $230.55
You Save: $76.31 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud Kit, Engine Electrical Coolant Fan; Dual Radiator and Condenser Fan Assembly; Shroud; Shroud Kit, Radiator Fan Shroud
- Replaces: 19129812
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Fan Shroud Part Number: 19130590
$85.44 MSRP: $157.84
You Save: $72.40 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud Kit, Engine Electrical Coolant Fan; Dual Radiator and Condenser Fan Assembly; Shroud; Shroud Kit, Radiator Fan Shroud
- Replaces: 19130519
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Chevrolet Equinox | Sport | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Equinox Fan Shroud Part Number: 19130587
$85.44 MSRP: $157.84
You Save: $72.40 (46%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Shroud Kit, Engine Electrical Coolant Fan; Dual Radiator and Condenser Fan Assembly; Shroud; Shroud Kit, Radiator Fan Shroud
- Replaces: 19130520
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Equinox | LS, LT, LTZ | 6 Cyl 3.4 L GAS
View related parts
Chevrolet Equinox Fan Shroud Part Number: 19130233
Product Specifications
- Other Name: Shroud Kit, Engine Electrical Coolant Fan; Dual Radiator and Condenser Fan Assembly; Shroud; Shroud Kit, Radiator Fan Shroud
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Chevrolet Equinox | Sport | 6 Cyl 3.6 L GAS

Chevrolet Equinox Fan Shroud

Want to cut long-term maintenance and repair costs? Choose OEM Fan Shroud. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Equinox parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Equinox Fan Shroud includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Equinox Fan Shroud is one of the most needed parts that contributes to strong confidence in the reliability of the Chevrolet Equinox's cooling system. By thus, designing the Fan Shroud has the function of properly isolating the cooling fan so that it can most efficiently perform its duty of cooling the engine as this is key in the viability of the vehicle. This Fan Shroud also prevents the debris from getting to the fan blades and, in the process, increases the cooling system's longevity. Since the Chevrolet Equinox has gone through three generations, the Fan Shroud is compatible with different generations and models, which speaks about its adjustment to particular engine layouts and cooling needs. Being design for the Chevrolet Equinox, that combines style and functionality, the Fan Shroud round increases the car's efficiency and safety- two values highly appreciated in the automotive world. Worthy to note also about this particular Chevrolet Equinox Fan Shroud is its hardness that allows it to withstand different driving conditions and it also comes with a correct fitment that will perfectly blend with the design of the vehicle. Besides enhancing the cooling ability of the automobile, this aspect enhances the durability of the Chevrolet Equinox. Chevrolet Equinox has been one of the most favourite cars with the number of units sold being more than 2 millions and the Fan Shroud is a significant prerequisite to the car's reputation for power and safety.

Chevrolet Equinox Fan Shroud Parts and Q&A

Fan Shroud
89024963
Q: How to replace the cooling fan and fan shroud on Chevrolet Equinox?
A:
Replacing cooling fan and shroud requires beginning with front fascia removal and coolant drain. You must disconnect the electric connections that operate the Fan Motors while unclipping the wire harness attached to the fan assembly. To proceed with the condenser Radiator fan module (CRFM) replacement you must remove both panel retainers and then the closeout panel from the condenser. Remove first the crfm mounting bracket bolts then detach the mounting brackets from the Radiator support. Start by disconnecting the antenna cable at the Radiator inlet and removing the clamp and hose from the Radiator and then unclip the transmission cooler lines and disconnect the upper line. The crfm assembly should be lifted up from its lower mounts while the top section gets tipped forward and the bottom section gets moved backward until all fan assembly bolts can be removed for removing the crfm from the Radiator. Install the fan assembly onto the Radiator by guiding it correctly and verify that lower tabs fit into the hooks before tightening fan assembly bolts to 8 nm (71 inch lbs.). After placing the crfm assembly on lower mounts install the Radiator inlet hose by clamping it. Attach the transmission cooler lines onto the fan assembly before linking the upper transmission cooler line to the Radiator. Attach the crfm mounting brackets along with bolts to the Radiator support before securing them to 8 nm (71 inch lbs.). When you install the crfm closeout panel you should also attach its retainers to the condenser while connecting electrical connectors to fan motors and hooking transmission cooler lines and engine wire harness to the fan assembly. The completion of the installation process includes reattaching the front fascia along with filling the cooling system.