How to replace the rack and pinion on Chevrolet Colorado?

If one needs to change the Rack And Pinion on 2004 to 2006 chevrolet colorado, 2004 to 2006 gmc canyon, and 2006 hummer h3, then he or she has to first lift the vehicle and consider enough help from transportation device, next remove both the front tire and wheel assembly. If they are available, remove the engine protection shield and remove the outer Tie Rod End from the Steering Knuckle. Loose drain pan in order to catch fluid and remove your steering Rack And Pinion hose assembly from the Rack And Pinion. Take off the coupler clamp bolt from the intermediate shaft and divide the intermediate shaft from the Rack And Pinion. Next, take out the Rack And Pinion vertical mounting nuts, washers, and bolts. For 4 x 4 trucks, support the front carrier and disconnect the driver's side mounting bracket-to-frame bolts and position the left side of front carriers rearward to remove the Rack And Pinion. After the Rack And Pinion was removed from the engine, removal of the Rack And Pinion horizontal mounting nuts, washers, and bolts was done, followed by the Rack And Pinion right-hand isolator bracket. For 2wd, remove the crossmember before removing the Rack And Pinion from the vehicle. To install it, put the Rack And Pinion back into the car and install the right-hand isolator bracket. Loosely install the Rack And Pinion horizontal mounting nuts, washers, and bolts, making sure it is tightened and the driver's side carrier mounting bracket-to-frame bolts to 152 n.m (112 lb-ft) for 4wd vehicles. Take away the front carrier support first and install the crossmember for the 2wd models. Loosely install the Rack And Pinion vertical mount nuts, washers and bolts, tighten the long bolts to 130 n. M (96 lb f), and the isolator clamp bolts to 100 n.m (74 lb ft). Return the intermediate shaft to its attachment on the Rack And Pinion and bolt on the coupler clamp bolt. Reconnect the Rack And Pinion hose assembly to the Rack And Pinion, and reinstall the engine protection shield if one is installed. Mount the outer Tie Rod End replacing the Steering Knuckle, thereafter re-mount the two front tire and wheel assemblies. Compress the vehicle, bleed the Rack And Pinion system, and check the wheel adjustment.

OEM Chevrolet Colorado Rack And Pinion

Steering Rack And Pinion

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

18 Rack And Pinions found

View related parts
Chevrolet Colorado Steering Gear Part Number: 15951338
$455.60 MSRP: $782.48
You Save: $326.88 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear, Steering; Gear Assembly
- Replaces: 25817575, 15864178, 15921544
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2012 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 25912269
$489.26 MSRP: $949.56
You Save: $460.30 (49%)
ADD TO CART
Product Specifications
- Other Name: Gear, Steering; Gear Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Gear Assembly Part Number: 84168690
$994.33 MSRP: $1940.65
You Save: $946.32 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering
- Replaced by: 84670807
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023, 2015-2016 Chevrolet Colorado | Base, LT, WT, Z71 | 4 Cyl 2.5 L GAS, 4 Cyl 2.7 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Gear Assembly Part Number: 86544643
$969.88 MSRP: $1296.75
You Save: $326.87 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Electric Belt Drive Rack & Pinion Steering; Rack; Gear, Steering
- Replaced by: 85783895
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Chevrolet Colorado | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Colorado Rack Part Number: 86544642
$969.88 MSRP: $1296.75
You Save: $326.87 (26%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly, Electric Belt Drive Rack & Pinion Steering; Gear, Steering
- Replaced by: 85783894
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Chevrolet Colorado | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 84670808
$1089.97 MSRP: $1519.91
You Save: $429.94 (29%)
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaces: 84498587, 84494276, 22963310, 23353848, 84168691, 84411672
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chevrolet Colorado | Base, LT, WT, Z71 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 84670804
$1022.75 MSRP: $1417.82
You Save: $395.07 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaces: 84498591, 84411669, 84128296, 84250202
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017 Chevrolet Colorado | Base, LT, WT, Z71 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Gear Assembly Part Number: 84670803
$1286.21 MSRP: $1658.80
You Save: $372.59 (23%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear, Steering
- Replaces: 84128297, 84411668, 84250201, 84296034, 84498590
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017 Chevrolet Colorado | Base, LT, WT, Z71 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 84670798
$1249.45 MSRP: $1732.12
You Save: $482.67 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaces: 84366284, 84408078, 84494267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2022 Chevrolet Colorado | Base, LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 84670794
$1173.36 MSRP: $1622.26
You Save: $448.90 (28%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaces: 84411664, 84298322, 84498594, 84460094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2022 Chevrolet Colorado | Base, LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 25817574
$492.99 MSRP: $956.80
You Save: $463.81 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Gear, Steering; Gear Assembly
- Replaces: 15921545
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 26095462
Product Specifications
- Other Name: Gear Kit, Steering (Rack & Pinion); Gear Assembly
- Replaced by: 19330469
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 19330468
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Kit, Steering
- Replaces: 19300498, 26095461
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 19330466
Product Specifications
- Other Name: Gear Kit, Steering (Remanufacture); Gear Assembly; Gear Kit, Steering
- Replaces: 19300497, 26095460
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 15951337
Product Specifications
- Other Name: Gear, Steering; Gear Assembly
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 Chevrolet Colorado | LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 15864177
Product Specifications
- Other Name: Gear, Steering; Gear Assembly
- Replaces: 15270454, 15921543, 25817576, 25912267
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006-2008 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 84670810
$1085.44 MSRP: $1950.09
You Save: $864.65 (45%)
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaces: 84295992, 84297659, 84366283, 84408076, 84179366
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017 Chevrolet Colorado | LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado Steering Gear Part Number: 84670795
$1051.72 MSRP: $1349.49
You Save: $297.77 (23%)
Product Specifications
- Other Name: Gear Assembly-Electrical Belt Drive Rack & Pinion Steering; Gear Assembly; Gear, Steering
- Replaces: 84460095, 84411665, 84498595
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2022 Chevrolet Colorado | Base, LT, WT, Z71, ZR2 | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS

Chevrolet Colorado Rack And Pinion

Want to cut long-term maintenance and repair costs? Choose OEM Rack And Pinion. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Colorado parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Colorado Rack And Pinion includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Rack And Pinion in Chevrolet Colorado is one of the components of your car that enables turning movements and change the rotational motion of the steering wheel into the lateral motion of the front wheels. Known for its efficiency and effectiveness in its mechanical functionality is the rack and pinion steering system which comprises of a pinion gear fixed to the steering column and a rack gear which lies within a metal tube and is used to translate the motion of the steering wheel to that of the wheels. Chevrolet Colorado models mostly incorporate power assisted rack and pinion steering systems in that the steering ease is boosted through use of hydraulic pressure. Previous vehicle designs used a manual rack but this modern Colorado designs use a hydraulic system that may have related problems like leakages or damaged gears which may require replacement of the Rack And Pinion assembly. Distinctions related to the shape of the racks can be made, and the utilised helical gears can be straight despite the fact that helical ones are theoretically more efficient but carry higher wear rates. Altogether, the Rack And Pinion is crucial for an appropriate path of a car and is used in Chevrolet Colorado automobiles.

Chevrolet Colorado Rack And Pinion Parts and Q&A

Steering Gear
15951338
Q: How to replace the rack and pinion on Chevrolet Colorado?
A:
If one needs to change the Rack And Pinion on 2004 to 2006 chevrolet colorado, 2004 to 2006 gmc canyon, and 2006 hummer h3, then he or she has to first lift the vehicle and consider enough help from transportation device, next remove both the front tire and wheel assembly. If they are available, remove the engine protection shield and remove the outer Tie Rod End from the Steering Knuckle. Loose drain pan in order to catch fluid and remove your steering Rack And Pinion hose assembly from the Rack And Pinion. Take off the coupler clamp bolt from the intermediate shaft and divide the intermediate shaft from the Rack And Pinion. Next, take out the Rack And Pinion vertical mounting nuts, washers, and bolts. For 4 x 4 trucks, support the front carrier and disconnect the driver's side mounting bracket-to-frame bolts and position the left side of front carriers rearward to remove the Rack And Pinion. After the Rack And Pinion was removed from the engine, removal of the Rack And Pinion horizontal mounting nuts, washers, and bolts was done, followed by the Rack And Pinion right-hand isolator bracket. For 2wd, remove the crossmember before removing the Rack And Pinion from the vehicle. To install it, put the Rack And Pinion back into the car and install the right-hand isolator bracket. Loosely install the Rack And Pinion horizontal mounting nuts, washers, and bolts, making sure it is tightened and the driver's side carrier mounting bracket-to-frame bolts to 152 n.m (112 lb-ft) for 4wd vehicles. Take away the front carrier support first and install the crossmember for the 2wd models. Loosely install the Rack And Pinion vertical mount nuts, washers and bolts, tighten the long bolts to 130 n. M (96 lb f), and the isolator clamp bolts to 100 n.m (74 lb ft). Return the intermediate shaft to its attachment on the Rack And Pinion and bolt on the coupler clamp bolt. Reconnect the Rack And Pinion hose assembly to the Rack And Pinion, and reinstall the engine protection shield if one is installed. Mount the outer Tie Rod End replacing the Steering Knuckle, thereafter re-mount the two front tire and wheel assemblies. Compress the vehicle, bleed the Rack And Pinion system, and check the wheel adjustment.