What does the service of the engine control module (ECM) typically involve on Chevrolet Colorado?

Ecm service requires either a replacement of the ecm or eeprom programming services. Check that the installed ecm part matches the original requirement before any replacements. The new service ecm should be installed after you confirm the failed ecm. Vehicle owners must perform a cpps learn procedure both when changing the ecm or reprogramming it as well as when they replace or install the clutch pedal position sensor (CPPS) to prevent accidents and damage to the car when the Starter engages the gear. All operations of control module connectors and power connections need to be done under an off state ignition setting to stop damages occurring inside the control module. When working on the control module allow only the case material to contact battery voltage and refrain from touching both pins and soldered components on the circuit board to resist electrostatic damage. Check that all surfaces on control module connectors are clean from debris before testing the gaskets of connectors to stop contaminants from entering the system. Programming the replacement control module is required with necessary information about engine oil life but if programming is not performed the default setting will trigger a complete oil change needed at 5000 km (3,000 mi) from the last change. Through a scan tool check the ecm for its engine oil life percentage before removing the connectors from the ecm while implementing electrostatic discharge avoidance. The first step to remove the ecm requires disconnecting screws holding the mounting brackets. The installation process begins by inserting the ecm into its mounting bracket where tabs should completely fit before connecting ecm harness connectors to the ecm body. A new ecm requires programming after its installation. Perform the clutch pedal position sensor learn procedure when you have a manual transmission vehicle.

OEM Chevrolet Colorado Engine Control Module

Engine Control Computer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Engine Control Modules found

View related parts
Chevrolet Colorado ECM Part Number: 12692067
$278.29 MSRP: $564.16
You Save: $285.87 (51%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu) E92 Service ECM 2-Byte; Engine Control Module
- Replaced by: 12704477
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 Chevrolet Colorado | LT, WT, Z71 | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado PCM Part Number: 12678511
$265.60 MSRP: $538.40
You Save: $272.80 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu); Engine Control Module; ECM; Module, Emission Control System
- Replaces: 12636660, 12607096
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado ECM Part Number: 55512215
$194.82 MSRP: $352.62
You Save: $157.80 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu); Engine Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020 Chevrolet Colorado | LT, Z71, ZR2 | 4 Cyl 2.8 L DIESEL
View related parts
Chevrolet Colorado ECM Part Number: 12700116
$173.70 MSRP: $352.81
You Save: $179.11 (51%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu) E80 Service No Start.; Engine Control Module; Module, Emission Control System
- Replaces: 12669908, 12687467
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 Chevrolet Colorado | Base, LT, WT, Z71 | 4 Cyl 2.5 L GAS
View related parts
Chevrolet Colorado ECM Part Number: 12725663
$257.29 MSRP: $476.02
You Save: $218.73 (46%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu); Module, Emission Control System
- Replaces: 12683348, 12679078, 12659039, 12708794, 12698026, 12687296
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2022 Chevrolet Colorado | LT, WT, Z71, ZR2 | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Colorado ECM Part Number: 12725415
$280.17 MSRP: $526.15
You Save: $245.98 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/O Calibration); Module, Emission Control System
- Replaces: 12718010
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Chevrolet Colorado | LT, Trail Boss, WT, Z71, ZR2 | 4 Cyl 2.7 L GAS
View related parts
Chevrolet Colorado ECM Part Number: 12721353
$183.35 MSRP: $331.86
You Save: $148.51 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/ 2ND Mpu) & (W/O C; Module, Emission Control System
- Replaces: 55512265
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2020-2022 Chevrolet Colorado | LT, WT, Z71, ZR2 | 4 Cyl 2.8 L DIESEL
View related parts
Chevrolet Colorado ECM Part Number: 12721349
$263.03 MSRP: $493.96
You Save: $230.93 (47%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu); Module, Emission Control System
- Replaces: 24000462, 55487860, 55591599
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016 Chevrolet Colorado | LT, WT, Z71 | 4 Cyl 2.8 L DIESEL
View related parts
Chevrolet Colorado ECM Part Number: 12721348
$202.78 MSRP: $375.19
You Save: $172.41 (46%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Engine Control (W/2ND Mpu); Module, Emission Control System
- Replaces: 24000461, 55502052
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2019 Chevrolet Colorado | LT, WT, Z71, ZR2 | 4 Cyl 2.8 L DIESEL
View related parts
Chevrolet Colorado PCM Part Number: 12678513
$333.65 MSRP: $624.14
You Save: $290.49 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Replaces: 12633264
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2012 Chevrolet Colorado | LT | 8 Cyl 5.3 L GAS
View related parts
Chevrolet Colorado PCM Part Number: 19210067
Product Specifications
- Other Name: Module, Emission Control System; Engine Control Module; ECM
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Chevrolet Colorado | LS, LT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
View related parts
Chevrolet Colorado PCM Part Number: 19209820
Product Specifications
- Other Name: Module Assembly, Powertrain Control (Refurbished); ECM; Module, Emission Control System
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2006 Chevrolet Colorado | Base, LS, LT, Sport, Sport LS, WT, Z71, Z71 LS, Z85, Z85 LS | 4 Cyl 2.8 L GAS, 5 Cyl 3.5 L GAS

Chevrolet Colorado Engine Control Module

Want to cut long-term maintenance and repair costs? Choose OEM Engine Control Module. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Colorado parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Colorado Engine Control Module includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Colorado Engine Control Module or ECM famous part can play a critical role in increasing the dependability as well as the performance of Chevrolet Colorado vehicles. Also responsible for preserving the performance of the car, the Engine Control Module controls the air-fuel mixture and the idle speed through its control of numerous sensors like the oxygen and throttle position sensors. This technology of the advanced ECM supports the efficient combustion process that subsequently means fuel-conserving function besides minimizing emission hazards, both of which are helpful to the vehicle's performance and safety. Apps for various Chevrolet Colorado models, the Engine Control Module has developed with early integrated circuit designs to complex microprocessor-type software to add components such as variable valve timing and other high-performance settings. The ability of the ECM to handle an increasing number of Chevrolets such newer models of Chevrolet Colorado equipped different engines, 2.4L and 3.6L, add credibility to the stated fact that the product is incredibly durable. Also, the Engine Control Module is utilized in improving safety standards as it monitors different engine characteristics and likely failures. The Chevrolet Colorado Engine Control Module specifically boasts a unique feature of being compatible with both the regular and hybrid models in the automotive market, quite possibly due to its integration with the latest ideas in technology. All in all the Chevrolet Colorado and ECM reflect prime in class and commitment from Chevrolet to deliver on performance, efficiency and safety hence the prime pickup truck for the daily driver.

Chevrolet Colorado Engine Control Module Parts and Q&A

PCM
12678511
Q: What does the service of the engine control module (ECM) typically involve on Chevrolet Colorado?
A:
Ecm service requires either a replacement of the ecm or eeprom programming services. Check that the installed ecm part matches the original requirement before any replacements. The new service ecm should be installed after you confirm the failed ecm. Vehicle owners must perform a cpps learn procedure both when changing the ecm or reprogramming it as well as when they replace or install the clutch pedal position sensor (CPPS) to prevent accidents and damage to the car when the Starter engages the gear. All operations of control module connectors and power connections need to be done under an off state ignition setting to stop damages occurring inside the control module. When working on the control module allow only the case material to contact battery voltage and refrain from touching both pins and soldered components on the circuit board to resist electrostatic damage. Check that all surfaces on control module connectors are clean from debris before testing the gaskets of connectors to stop contaminants from entering the system. Programming the replacement control module is required with necessary information about engine oil life but if programming is not performed the default setting will trigger a complete oil change needed at 5000 km (3,000 mi) from the last change. Through a scan tool check the ecm for its engine oil life percentage before removing the connectors from the ecm while implementing electrostatic discharge avoidance. The first step to remove the ecm requires disconnecting screws holding the mounting brackets. The installation process begins by inserting the ecm into its mounting bracket where tabs should completely fit before connecting ecm harness connectors to the ecm body. A new ecm requires programming after its installation. Perform the clutch pedal position sensor learn procedure when you have a manual transmission vehicle.