How to replace or repair a door moldings on Chevrolet Cavalier?

Before starting new body side molding installation protect the mounting surface with adhesive tape and mark alignment points according to installation requirements. The J 25070 (Heat Gun) should apply circular motions of heat at 152 mm (6 in) height from the surface for 30 seconds. A flat plastic tool enables safe removal of body side molding from its position on the panel surface. Duty when replacing body side moldings that all adhesive needs to be completely removed. When dealing with body panels users need a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07501) or an equivalent but plastic panels require cleaning with Varnish Makers and Painters (VMP) naphtha or a 50/50 isopropyl alcohol and water solution and a lint-free cloth. You should apply the same cleaning solution to clean the installation area followed by a complete dry down period. Apply the J 25070 (Heat Gun) to heat the mounting surface to a temperature between 27-41°C (80-105°F) before placing the body side molding at around 29-32°C (85-90°F). Touch only the adhesive-free area then peel away the protective liner from rear body side molding adhesive and align it with pre-made marks before applying consistent pressure for overall bonding. Remove all protective tape from your mounting surface.

OEM Chevrolet Cavalier Door Moldings

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

92 Door Moldings found

View related parts
Chevrolet Cavalier Body Side Molding, Green, Front Passenger Side Part Number: 88892960
$6.75 MSRP: $28.53
You Save: $21.78 (77%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Front Side Door; Door Moldings
- Position: Passenger Side
- Replaces: 22588672, 22606244, 22581395, 22647938, 22595406, 22656114, 22588664, 22595408, 22616018, 22588666, 22588668, 22647942, 22635828, 22588662, 22616020, 22647940
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2002 Chevrolet Cavalier | Base, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cavalier Body Side Molding, Black, Front Part Number: 22592235
$23.54 MSRP: $45.66
You Save: $22.12 (49%)
ADD TO CART
Product Specifications
- Other Name: Molding, Front Side Door; Door Moldings; Molding
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1994 Chevrolet Cavalier | RS, Z24 | 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Interior Molding Part Number: 12522547
$93.41 MSRP: $139.00
You Save: $45.59 (33%)
ADD TO CART
Product Specifications
- Other Name: Molding
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Chevrolet Cavalier | Base, CL, CS, RS, VL | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Body Side Molding, Green, Front Driver Side Part Number: 88892959
$63.56 MSRP: $90.95
You Save: $27.39 (31%)
ADD TO CART
Product Specifications
- Other Name: Molding, Front Side Door; Door Moldings
- Position: Driver Side
- Replaces: 22588671, 22616021, 22595407, 22588667, 22588673, 22623825, 22635829, 22581396, 22616019, 22588663, 22647939, 22606245, 22595409, 22647943, 22588665, 22647941
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2002 Chevrolet Cavalier | Base, RS, Z24 | 4 Cyl 2.2 L BI-FUEL, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cavalier Edge Guard, Black, Passenger Side Part Number: 20451890
$13.11 MSRP: $17.40
You Save: $4.29 (25%)
ADD TO CART
Product Specifications
- Other Name: Molding; Door Moldings; Molding, Door Edge
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Chevrolet Cavalier | Base, CL, CS, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Body Side Molding, Blue; Green; White, Rear Center Part Number: 22652299
$62.05 MSRP: $80.43
You Save: $18.38 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Molding, Rear Side Door Center; Door Moldings; Molding, Rear Side Door
- Position: Rear Center
- Replaces: 22588695, 22656125, 22588693, 22676276, 22606824, 22616057, 22623862, 22588696, 22595418, 22616056, 22636463, 22647963, 22647962, 22588694, 22595417, 22636462, 22588692, 22588697
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Cavalier | LS, LS Sport | 2.2L L4, 2.3L L4, 2.4L L4, 4 Cyl 2.2 L GAS, 4 Cyl 2.3 L GAS, 4 Cyl 2.4 L GAS
View related parts
Chevrolet Cavalier Side Molding, Gray, Driver Side Part Number: 20410811
$19.27 MSRP: $27.57
You Save: $8.30 (31%)
ADD TO CART
Product Specifications
- Other Name: Molding; Molding, Rear Quarter Panel
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Chevrolet Cavalier | Base, CL, CS, RS | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Chevrolet Cavalier Body Side Molding, Passenger Side Part Number: 22539606
Product Specifications
- Other Name: Molding; Door Moldings; Molding, Front Side Door
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1990 Chevrolet Cavalier | Base, VL | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS
View related parts
Chevrolet Cavalier Molding, Black, Passenger Side Part Number: 20606428
Product Specifications
- Other Name: Moulding-Edge Guard Rear Door *Black; Molding, Door Edge
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1990 Chevrolet Cavalier | Base, RS, VL | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Reveal Molding, Black, Driver Side Part Number: 20360315
Product Specifications
- Other Name: Moulding Scalp Front Door Window Frame Rear *Black; Door Moldings
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1993 Chevrolet Cavalier | Base, CL, CS, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Reveal Molding, Black, Driver Side Part Number: 20360309
Product Specifications
- Other Name: Moulding; Door Moldings
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1993 Chevrolet Cavalier | Base, RS, VL | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Body Side Molding Part Number: 12502121
Product Specifications
- Other Name: F-Molding; Door Moldings
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988 Chevrolet Cavalier | Base, VL | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Chevrolet Cavalier Molding, Driver Side Part Number: 20606427
Product Specifications
- Other Name: Molding, Door Edge; Door Moldings
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1986-1990 Chevrolet Cavalier | Base, CL, CS, RS, VL | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Edge Guard, Passenger Side Part Number: 20717290
Product Specifications
- Other Name: Molding, Door Edge; Door Moldings; Molding
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Chevrolet Cavalier | Base, CL, CS, RS | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Chevrolet Cavalier Edge Guard, Black, Driver Side Part Number: 20451891
Product Specifications
- Other Name: Molding; Door Moldings; Molding, Door Edge
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1990 Chevrolet Cavalier | Base, CL, CS, RS, Type-10, VL, Z24 | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS
View related parts
Chevrolet Cavalier Side Molding, Gray Part Number: 20410813
Product Specifications
- Other Name: Molding; Molding, Front Fender And Body Ornamentation
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Chevrolet Cavalier | Base, CL, CS, RS, Type-10, Z24 | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Chevrolet Cavalier Side Molding, Black; Red Part Number: 20475421
Product Specifications
- Other Name: Molding; Molding, Front Fender And Body Ornamentation
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1987 Chevrolet Cavalier | Base, CL, CS, RS, Type-10, Z24 | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Chevrolet Cavalier Reveal Molding, Passenger Side Part Number: 20156852
Product Specifications
- Other Name: Molding; Door Moldings; Rear Cover; Molding, Front Door Window Reveal
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1989 Chevrolet Cavalier | Base, CL, CS, RS, VL | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Chevrolet Cavalier Reveal Molding, Front Passenger Side Part Number: 20690762
Product Specifications
- Other Name: Molding, Front Door Window Reveal; Door Moldings
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1988-1989 Chevrolet Cavalier | RS, Z24 | 4 Cyl 2.0 L GAS, 6 Cyl 2.8 L GAS
View related parts
Chevrolet Cavalier Reveal Molding, Rear Driver Side Part Number: 20360313
Product Specifications
- Other Name: Molding, Rear Side Door Window Reveal; Door Moldings; Upper Molding
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1989-1993 Chevrolet Cavalier | RS, VL | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS

| Page 1 of 5 |Next >

1-20 of 92 Results

Chevrolet Cavalier Door Moldings

Want to cut long-term maintenance and repair costs? Choose OEM Door Moldings. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Cavalier parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Cavalier Door Moldings includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Chevrolet Cavalier Door Moldings are unique parts that play a big role in the general outlook as well as functionality of the Chevrolet Cavalier's side doors. These Door Moldings are designed and produced to the highest standards and the most commonly used materials are plastic, stainless steel or chrome, thus guaranteeing that they would adequately protect the sheet metal of vehicles from dings and dents. The Chevrolet Cavalier is an automobile in people's compact car category with multiple series, so these Door Moldings will fit models from 1982 up to 2005 and further. It can be said that their positioning is not just aesthetic because these elements also serve to distribute loads, protect parts of the Chevrolet Cavalier from damage, and increase efficiency during normal operations. Other optional scuff plates like the door edge moldings and the rocker panel moldings helps in the enhancement of the Chevrolet Cavalier Door Moldings to give utmost protection against falling objects and other forms of wear. As is the tradition with many sacrificial components, the Door Moldings are intended to withstand the normal wear and tear of daily use, thereby enhancing the Chevrolet Cavalier's strong image. All in all, the Chevrolet Cavalier Door Moldings are among the prime in the market because of their design, protection offer and compatibility with other models, reflecting Chevrolet's undying mark of progressive improvements in the automobile industry with efficient models to cater for the world's car users.

Chevrolet Cavalier Door Moldings Parts and Q&A

Body Side Molding, Blue; Green; White, Rear Center
22652299
Q: How to replace or repair a door moldings on Chevrolet Cavalier?
A:
Before starting new body side molding installation protect the mounting surface with adhesive tape and mark alignment points according to installation requirements. The J 25070 (Heat Gun) should apply circular motions of heat at 152 mm (6 in) height from the surface for 30 seconds. A flat plastic tool enables safe removal of body side molding from its position on the panel surface. Duty when replacing body side moldings that all adhesive needs to be completely removed. When dealing with body panels users need a 3M(TM) Scotch Brite molding adhesive remover disk (3M(TM) P/N 07501) or an equivalent but plastic panels require cleaning with Varnish Makers and Painters (VMP) naphtha or a 50/50 isopropyl alcohol and water solution and a lint-free cloth. You should apply the same cleaning solution to clean the installation area followed by a complete dry down period. Apply the J 25070 (Heat Gun) to heat the mounting surface to a temperature between 27-41°C (80-105°F) before placing the body side molding at around 29-32°C (85-90°F). Touch only the adhesive-free area then peel away the protective liner from rear body side molding adhesive and align it with pre-made marks before applying consistent pressure for overall bonding. Remove all protective tape from your mounting surface.