How Must the A/C Accumulator Be Installed on the A/C Evaporator Tube to Eliminate the Need for Flushing the A/C System on Chevrolet Camaro?

A/C Accumulator model ac p/n-1760 should be installed between condenser and Evaporator on the a/c Evaporator tube (liquid line) to eliminate the requirement for a/c system flushing. The first step should start with the recovery of a/c refrigerant. Manufacture two 50.8 mm (2 in) spaced marks on the Evaporator tube at a distance of 50 mm (2 in) below both the first line hanger and black foam insulation before removing the tube while making sure no metal burrs enter the liquid line. A line cutter should be used to make cuts at the marked line positions of the liquid line while removing any burrs. Fasten the Evaporator tube bolt until it reaches a torque of 25 n.m which is equivalent to 18 lb ft. The accumulator needs the nuts and ferrules removed together with o-rings but their installation should wait until later. The small termination of each ferrule should be directed toward the tightening nut that gets mounted to the accumulator before inserting both liquid line halves so they rest completely within the accumulator. Secure the relatively horizontal position of the Evaporator tube inside the accumulator while tightening both nuts. The operator must first remove the accumulator from the Evaporator tube before applying clean 525 viscosity refrigerant oil to the o-rings. The o-rings will then be installed onto the liquid line. The accumulator receives the liquid line with its bottom end facing down before tightening the adjacent nuts to 15 n.m (11 lb ft). Complete the installation by putting on the a/c line then dropping the vehicle before evacuating and charging the system.

OEM Chevrolet Camaro A/C Accumulator

Accumulator

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 A/C Accumulators found

View related parts
Chevrolet Camaro Dehydrator Part Number: 92229743
$81.17 MSRP: $152.43
You Save: $71.26 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Receiver & Dehydrato, Air Conditioner Refrigerant; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Receiver & Dehydrato, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2011 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Dehydrator Part Number: 2724700
$30.33 MSRP: $56.96
You Save: $26.63 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Accumulator; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1984-1992 Chevrolet Camaro | Base, Berlinetta, Iroc-Z, LT, RS, RS Heritage Edition, Sport, Z28, Z28 Heritage Edition | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Drier Dessicant Bag Part Number: 84951726
$15.20 MSRP: $27.52
You Save: $12.32 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Receiver & Dehydrato, Air Conditioner Refrigerant; Dehydrator; Receiver & Dehydrato, A/C Refrigerant
- Replaced by: 86551900
- Replaces: 23248772
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2024 Chevrolet Camaro | LS, LT, LT1, SS, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Drier Dessicant Bag Part Number: 84951727
$37.61 MSRP: $77.30
You Save: $39.69 (52%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Receiver & Dehydrato, Air Conditioner Refrigerant; Dehydrator; Plug; Drier; Receiver & Dehydrato, A/C Refrigerant; Desiccant Kit, A/C Refrigerant; Plug, A/C Refrigerant
- Replaced by: 86551901
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2024 Chevrolet Camaro | LS, LT, LT1, SS, Z/28, ZL1 | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Dehydrator Part Number: 1132796
$52.52 MSRP: $101.75
You Save: $49.23 (49%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Accumulator Assembly A/C; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator; Accumulator, A/C Refrigerant
- Replaces: 1132764
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2002 Chevrolet Camaro | Base, Z28, Z28 SS | 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Dehydrator Part Number: 88959211
Product Specifications
- Other Name: Receiver & Dehydrator Assembly, A/C; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Receiver & Dehydrato, A/C Refrigerant
- Replaces: 02724910, 2724910
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995 Chevrolet Camaro | Base, Z28 | 6 Cyl 3.4 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro A/C Hose Part Number: 2724937
Product Specifications
- Other Name: Accumulator; Drier Desiccant Element; A/C Accumulator; Dehydrator; Drier; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997 Chevrolet Camaro | Base, RS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Camaro Dehydrator Part Number: 2724907
Product Specifications
- Other Name: Accumulator Assembly, A/C; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Accumulator, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1996 Chevrolet Camaro | Base, RS | 6 Cyl 3.8 L GAS
View related parts
Chevrolet Camaro Dehydrator Part Number: 2724698
Product Specifications
- Other Name: Receiver & Dehydrator Assembly-A/C; Drier Desiccant Element; A/C Receiver Drier; A/C Accumulator; Drier; Receiver & Dehydrato, A/C Refrigerant
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1996-1997, 1993-1994 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, Z28 | 6 Cyl 3.4 L GAS, 8 Cyl 5.7 L GAS

Chevrolet Camaro A/C Accumulator

Want to cut long-term maintenance and repair costs? Choose OEM A/C Accumulator. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro A/C Accumulator includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Camaro V8 A/C Accumulator is a part of Chevrolet Camaro automobile models that enhances the automobile's ability to perform cooling for the car's interior optimally and with little to no failure. Being widely recognized as one of the most commendable components on the Camaro, the A/C Accumulator is designed to capture abrasive particles and to act as a receptacle for moisture to increase the effectiveness of the car's climate control. This feature is quite valuable because it relates to the general feel and usability of the Camaro and is a major attraction for many Camaro fans. The product fits a wide variety of Camaro models and its use of either a V6 or V8 engine is taken into consideration depending on the model in development. It also prepares a positive impact on the air conditioning system and safety because the passage of AC maintains the system's purity. The A/C Accumulator is intended to catch the attention of the buyers in the automotive market because it is well-constructed and performs optimally in achieving a comfortable climate control system for cars. Also, regarding the design aspect of the A/C Accumulator it has been designed to blend smoothly into the Camaro existing systems in order to enable efficient air conditioning by the car's drivers. Still, the A/C Accumulator continues to create a buzz due to its ability to deliver the optimal reliability and performance to the Camaro and serves as the solid proof of the Chevrolet's strive for excellence in the sphere of automotive industry.

Chevrolet Camaro A/C Accumulator Parts and Q&A

Dehydrator
1132796
Q: How Must the A/C Accumulator Be Installed on the A/C Evaporator Tube to Eliminate the Need for Flushing the A/C System on Chevrolet Camaro?
A:
A/C Accumulator model ac p/n-1760 should be installed between condenser and Evaporator on the a/c Evaporator tube (liquid line) to eliminate the requirement for a/c system flushing. The first step should start with the recovery of a/c refrigerant. Manufacture two 50.8 mm (2 in) spaced marks on the Evaporator tube at a distance of 50 mm (2 in) below both the first line hanger and black foam insulation before removing the tube while making sure no metal burrs enter the liquid line. A line cutter should be used to make cuts at the marked line positions of the liquid line while removing any burrs. Fasten the Evaporator tube bolt until it reaches a torque of 25 n.m which is equivalent to 18 lb ft. The accumulator needs the nuts and ferrules removed together with o-rings but their installation should wait until later. The small termination of each ferrule should be directed toward the tightening nut that gets mounted to the accumulator before inserting both liquid line halves so they rest completely within the accumulator. Secure the relatively horizontal position of the Evaporator tube inside the accumulator while tightening both nuts. The operator must first remove the accumulator from the Evaporator tube before applying clean 525 viscosity refrigerant oil to the o-rings. The o-rings will then be installed onto the liquid line. The accumulator receives the liquid line with its bottom end facing down before tightening the adjacent nuts to 15 n.m (11 lb ft). Complete the installation by putting on the a/c line then dropping the vehicle before evacuating and charging the system.