OEM Chevrolet Avalanche 2500 Center Console

Chevrolet Avalanche 2500 Center Console Parts and Q&A

• Console Assembly
  88986684
  Q: How to replace the Center Console with the console mounting bracket on Chevrolet Avalanche 2500?

  A:

  Begin the process of console replacement with console mounting bracket installation by first removing both front seats. The vehicle requires a bose(R) amplifier so the radio amp Fuse must be removed from the hood electrical center. As the next step remove both the upper console bezel together with the cup holder. Begin console removal by unscrewing the screws which mount the console to the i/p followed by disconnecting wire connectors so you can extract the console assembly from the vehicle. Extract the rear seat audio control device from the console whenever possible. Start your installation process by attaching any removed rear seat audio controls back to the console. Reattach the console to the vehicle before connecting all wire connectors. Proceed with console installation by sliding into position to secure the retaining screws according to the fastener notice in service precautions. Attach the console using 2 screws, applying 4 n.m (35 lb in) of torque to each screw. Reinstall the cup holder after placing the upper console bezel back into position and then restore the radio amp Fuse only if it had been removed from the system prior to both front seats reinstallation.