Other Name: Relay, Air Suspension And Inflator Unit; Multi Purpose Relay; Relay, Engine Air Cooling; Emission Control System; Voltage And Glow Plug; Rear Window Defogger
Fits the following Cadillac Models:
DeVille | 2000-2005 | Base, DHS, DTS, Protection Series | 8 Cyl 4.6 L GAS
Other Name: Relay, Headlamp/Fog Lamp/Turn Signal; Multi Purpose Relay; Relay: Trans Oil Pump, Eng Air Cooling(Elec), Headlamp Washer/Wiper, Voltage & Glow Plug, Eng Vacuum Pump, Starter Motor
Replaces: 13500119
Fits the following Cadillac Models:
ATS | 2015-2017 | Base, Luxury, Performance, Premium, Premium Luxury, Premium Performance, V | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
XT5 | 2017-2018 | Base, Luxury, Platinum, Premium Luxury | 6 Cyl 3.6 L GAS
Other Name: Relay Assembly-Electrical Door Lock; Multi Purpose Relay; Actuator Relay; Door Electric And Vacuum Locks; End Gate Electrical; Front Seat Lumbar; Body Wiring
Fits the following Cadillac Models:
Seville | 1986-1988 | Base, Elegante, STS | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS
Other Name: Relay Assembly-Anti Theft; Multi Purpose Relay; Relay,Theft Deterrent Or Front/Rear/Side/Intake Object
Fits the following Cadillac Models:
Seville | 1986-1991 | Base, Elegante, STS | 8 Cyl 4.1 L GAS, 8 Cyl 4.5 L GAS, 8 Cyl 4.9 L GAS
| Page 1 of 5 |Next >
1-20 of 93 Results
Cadillac Relay
Choose OEM Relay, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Cadillac's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Cadillac Relay. You can shop at highly competitive prices and protect your budget. All our genuine Cadillac parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.
Q: How to replace the Power Distribution Relay attached to the wire harness on Cadillac CTS?
A:
Users can find the Power Distribution Relay position through the Master Electrical Component List. Following this discovery users must play the relay from its wire harness base. The first step is to remove all fasteners which attach the relay before unfastening any connector position assurance (CPA) devices or secondary locks while being cautious to protect the relay and wire harness connection points if the relay is secured by fasteners or tape. Behind the wire harness connector you should separate the relay. Then connect the new relay to this same connector after which you need to reinstall everything as it was before along with CPA devices and secondary locks before tightening the relay with its original fasteners or tape.
Q: How to replace a relay within the electrical center on Cadillac Escalade?
A:
The first step to replace a relay in the electrical center includes removing the cover before finding the relay while keeping track of the orientation followed by properly securing the electrical center to protect wires and terminals from damage. Place the J 43244 Relay Puller Pliers (J 43244) tool on opposing relay corners prior to slow extraction from the electrical center terminals because pliers or flat-bladed devices may cause electrical center damage. Remove the electrical center cover before installing the new relay in the exact position of the removed ones followed by reinstallation of the electrical center cover.