How to replace the Shift Cable for the 2ML70 automatic transmission on Cadillac Escalade?

The process of replacing the 2ml70 automatic transmission range selector lever cable begins by setting the Steering Column shift lever to park position then removing the instrument panel knee bolster followed by driver seat removal together with the body hinge pillar trim panel. The first step involves removing Steering Column insulation and carpet while detaching the cable retainer bracket which secures the cable to the Steering Column. Next, unfasten the cable end from the Steering Column ball stud until both cable tangs depressing points can be accessed to pull out the cable from the Steering Column bracket. Prevent unnecessary cable twisting or bending during this procedure. The next step requires uninstallation of the range selector cable both from the support and from the floor panel's cable grommet. The technician should lift the vehicle while removing clips from the floor panel reinforcement followed by heat shield bolts of the range selector lever cable and then the heat shield. First place the transmission manual shaft lever into mechanical park mode then disconnect the range selector lever cable from the range select lever and take out the cable retainer and the cable from the cable bracket. Top installation requires the transmission manual shaft lever to remain in mechanical park before you attach the range selector lever cable onto its cable bracket using the retainer. First attach the cable end to the range select lever followed by heat shield installation and tightening its bolts to 17 nm (13 lb ft). Reposition the cable floor panel clips after securing them to the reinforcement and lower the vehicle with the shift lever staying in park position. Attaching the cable grommet to the floor panel should follow the range selector cable installation to the support and Steering Column bracket where tangs should fulfill full engagement. Use the retainer to fasten the cable end onto the ball stud of the Steering Column. The last step involves testing the transmission for correct shift operation by adjusting the cable when gear positions cannot be fully achieved. Afterward, install the body hinge pillar trim panel together with driver seat and instrument panel knee bolster while repositioning carpet and insulation.

OEM Cadillac Escalade Shift Cable

Transmission Shift Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

15 Shift Cables found

View related parts
Cadillac Escalade Shift Control Cable Part Number: 20787607
$87.46 MSRP: $148.89
You Save: $61.43 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2009 Cadillac Escalade | Base, Platinum | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable Part Number: 20787606
$46.89 MSRP: $79.81
You Save: $32.92 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Cadillac Escalade | Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable Part Number: 20787609
$47.30 MSRP: $80.53
You Save: $33.23 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
View related parts
Cadillac Escalade Shift Control Cable Part Number: 20787608
$59.43 MSRP: $98.94
You Save: $39.51 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable Part Number: 84507731
$58.53 MSRP: $99.65
You Save: $41.12 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 23258955
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2017 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable Part Number: 84867183
$32.62 MSRP: $53.73
You Save: $21.11 (40%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
- Replaced by: 86532014
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable Part Number: 19177020
$40.91 MSRP: $64.09
You Save: $23.18 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Kit, Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
- Replaces: 15945097
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Cadillac Escalade | Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable Part Number: 84525959
$49.86 MSRP: $74.21
You Save: $24.35 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Replaces: 22893848
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable Part Number: 84507732
$44.94 MSRP: $70.35
You Save: $25.41 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Replaces: 84271572
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable Part Number: 20787612
$52.77 MSRP: $79.62
You Save: $26.85 (34%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2013 Cadillac Escalade | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV)
View related parts
Cadillac Escalade Shift Control Cable Part Number: 19434392
$36.57 MSRP: $62.27
You Save: $25.70 (42%)
ADD TO CART
Product Specifications
- Other Name: Cable Assembly, Automatic Transmission Range Selector Lever; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 84868716, 25995564
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable Part Number: 84525957
$58.53 MSRP: $99.65
You Save: $41.12 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 23258956, 22893849
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Shift Control Cable Part Number: 84507729
$47.74 MSRP: $81.98
You Save: $34.24 (42%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Automatic Transmission Range Selector Lever (At Transmission); Automatic Transmission Shifter Cable; Cable, Transmission Shift Control Cable; Cable, Transmission Control Cable
- Replaces: 23174589
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Parking Brake Cable Part Number: 26082803
Product Specifications
- Other Name: Cable, Automatic Transmission Parking Lock; Cable; Cable, Transmission Control Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Shift Control Cable Part Number: 19207880
Product Specifications
- Other Name: Cable Kit, Automatic Transmission Range Selector Lever; Automatic Transmission Shifter Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009 Cadillac Escalade | Hybrid | 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)

Cadillac Escalade Shift Cable

Want to cut long-term maintenance and repair costs? Choose OEM Shift Cable. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Escalade parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Escalade Shift Cable includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Cadillac Escalade Shift Cable Parts and Q&A

Shift Control Cable
20787609
Q: How to replace the Shift Cable for the 2ML70 automatic transmission on Cadillac Escalade?
A:
The process of replacing the 2ml70 automatic transmission range selector lever cable begins by setting the Steering Column shift lever to park position then removing the instrument panel knee bolster followed by driver seat removal together with the body hinge pillar trim panel. The first step involves removing Steering Column insulation and carpet while detaching the cable retainer bracket which secures the cable to the Steering Column. Next, unfasten the cable end from the Steering Column ball stud until both cable tangs depressing points can be accessed to pull out the cable from the Steering Column bracket. Prevent unnecessary cable twisting or bending during this procedure. The next step requires uninstallation of the range selector cable both from the support and from the floor panel's cable grommet. The technician should lift the vehicle while removing clips from the floor panel reinforcement followed by heat shield bolts of the range selector lever cable and then the heat shield. First place the transmission manual shaft lever into mechanical park mode then disconnect the range selector lever cable from the range select lever and take out the cable retainer and the cable from the cable bracket. Top installation requires the transmission manual shaft lever to remain in mechanical park before you attach the range selector lever cable onto its cable bracket using the retainer. First attach the cable end to the range select lever followed by heat shield installation and tightening its bolts to 17 nm (13 lb ft). Reposition the cable floor panel clips after securing them to the reinforcement and lower the vehicle with the shift lever staying in park position. Attaching the cable grommet to the floor panel should follow the range selector cable installation to the support and Steering Column bracket where tangs should fulfill full engagement. Use the retainer to fasten the cable end onto the ball stud of the Steering Column. The last step involves testing the transmission for correct shift operation by adjusting the cable when gear positions cannot be fully achieved. Afterward, install the body hinge pillar trim panel together with driver seat and instrument panel knee bolster while repositioning carpet and insulation.