OEM Cadillac Escalade EXT Coolant Reservoir

Cadillac Escalade EXT Coolant Reservoir Parts and Q&A

• Recovery Tank
  15808715
  Q: How to replace the coolant reservoir on Cadillac Escalade EXT?

  A:

  The cooling system requires draining before proceeding with Coolant Reservoir replacement while also removing the air cleaner assembly. To start installation disconnect the low coolant level switch electrical connector and detach the Coolant Reservoir overflow hose. First unclasp the Coolant Reservoir inlet hose clamp before removing the hose while next unclipping the Coolant Reservoir outlet hose clamp before hose removal. The installation process begins by disassembling the Coolant Reservoir by removing its bolt and nut before removing the tank. Place the Coolant Reservoir in position then install its bolt with torque set to 9 nm (80 inch lbs.) followed by installing its nut with the same torque setting. Place the Coolant Reservoir inlet hose and its clamp before installing the Coolant Reservoir outlet hose and its clamp. After installing the low coolant level switch electrical connector users must reattach the Coolant Reservoir overflow hose as the next step while putting the air cleaner assembly back in position.
• Recovery Tank
  19353731
  Q: How to service and repair the coolant reservoir on Cadillac Escalade EXT?

  A:

  Firstly, drain off the cooling system to service and repair the Coolant Reservoir. Second, remove the surge tank inlet hose from the Radiator and move the hose clamp, surge tank inlet hose from the Radiator position. Then, move the surge tank inlet hose clamp back to the surge tank, pull out the surge tank inlet hose from the surge tank. For the installation, install first the surge tank inlet hose to the surge tank and position the surge tank inlet hose clamp to the surge tank. Following that, attach the surge tank inlet hose to the Radiator and place your surge tank inlet hose clamp to the Radiator. Finally, fill the cooling system.