How to replace the rear Drive Shaft on Cadillac Escalade?

The first step for propeller shaft replacement includes precise component tagging of the driveline system before disassembly so all parts can return to their original positions during reassembly by following torque specifications. Begin by raising the vehicle. Note down the positioning of the propeller shaft regarding the rear axle pinion yoke and the transmission or Transfer Case. The yoke retainers must be removed then bolts need to be separated from the rear axle pinion yoke. When removing the yoke ears it is essential to avoid using tools between the yoke and Universal Joint because it can lead to injection joints fracture. The process for removing the propeller shaft begins with moving it forward to detach from the rear axle pinion yoke and continues with retraction back toward the transmission or Transfer Case before completing the removal of the shaft from the vehicle. The Slip Yoke splines need inspection for lubrication before installation, use gm p/n 12345879 (Canadian P/N 10953511) or equivalent gm specification 9985830 (RWD w/4-speed Automatic Transmission) as lubricant when required. Reinstall the propeller shaft into the transmission or Transfer Case by matching the reference marks from removal before inserting it to the rear axle pinion yoke where reference marks must be exactly aligned. Drop the vehicle and properly install the yoke retainers while using 25 nm (18 lb ft) torque on the retainers bolts.

How to replace the front drive shaft on Cadillac Escalade?

You should begin propeller shaft replacement by first lifting the vehicle and then removing any Transfer Case shield that exists. Vehicle owners should replace the Transfer Case as per bw 4485-nr3 instructions while users of mp 3023/3024-nqh Transfer Case need to perform the required replacement process. The exposed end of the clamp requires prying with a flat-bladed tool in order to remove it at the Transfer Case. Avoid applying force to the yoke ears and never insert a tool between the Universal Joint and yoke to prevent damaging the injection joints. Make a note of how the front propeller shaft interacts with the drive axle flange before you uninstall all bolts and yoke retainers from the front axle pinion yoke. Keep the bearing caps from dropping. The propeller shaft needs to detach from the front axle pinion yoke and tape should be used to secure the bearing caps in their position. First remove the Transfer Case output shaft boot from its groove and then take off the propeller shaft from the output shaft. To complete the removal, unfasten the boot clamp first and then take out the boot. Before installation check the Transfer Case output shaft splines for adequate lubrication then apply gm p/n 12345879 (Canadian P/N 10953511) or an equivalent to the specified gm specification: 9985830. Place the propeller shaft boot alongside the boot clamp before slipping the propeller shaft splines into the Transfer Case output shaft while keeping the relationship marks properly aligned. Next reinstall the front axle pinion yoke propeller shaft while guarding the reference marks created at removal. Fasten Universal Joint retainers and bolts using torque of 25 nm (18 lb ft). The boot requires snapping onto the Transfer Case output shaft until it reaches the groove before crimping the clamps with j-43218 - clamp pliers - narrow jaw. The Transfer Case shield must follow specific installation procedure while inspecting the Transfer Case fluid level before the vehicle is lowered to the ground.

OEM Cadillac Escalade Drive Shaft

Axle Shaft

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Drive Shafts found

View related parts
Cadillac Escalade Drive Shaft, Front Part Number: 22760960
$394.54 MSRP: $696.20
You Save: $301.66 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Drive Shaft Part Number: 84997910
$408.40 MSRP: $672.76
You Save: $264.36 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller
- Replaced by: 87821415
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Drive Shaft, Front Part Number: 85519802
$285.90 MSRP: $449.74
You Save: $163.84 (37%)
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Shaft, Propeller
- Position: Front
- Replaced by: 85075685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Slip Yoke Part Number: 10390404
$1464.48 MSRP: $1964.46
You Save: $499.98 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Drive Shaft Assembly; Shaft, Propeller
- Replaces: 15075236, 15090206
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Drive Shaft Part Number: 84546235
$1291.54 MSRP: $2010.72
You Save: $719.18 (36%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 23209519, 23469168, 23251188, 23469170, 84083947
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Drive Shaft Part Number: 84997912
$323.62 MSRP: $533.12
You Save: $209.50 (40%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Shaft, Propeller
- Replaced by: 85816901
- Replaces: 84712239
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Drive Shaft Part Number: 23486754
$671.68 MSRP: $900.99
You Save: $229.31 (26%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Drive Shaft, Front Part Number: 22845694
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Shaft, Propeller
- Position: Front
- Replaces: 15902927
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Drive Shaft Part Number: 22845689
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 20912705, 20871266, 25932512, 22828501
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
View related parts
Cadillac Escalade Drive Shaft Part Number: 15814472
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2008 Cadillac Escalade | Base, Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Axle Shaft, Front Part Number: 26056795
Product Specifications
- Other Name: Shaft, Front Wheel Drive; Shaft
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Axle Shaft, Rear Part Number: 26020040
Product Specifications
- Other Name: Shaft, Rear Axle Drive; Axle Shafts
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Drive Shaft Part Number: 23469162
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft
- Replaces: 22760928
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2017 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Drive Shaft Part Number: 22845691
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 20887168, 20887169, 20935680, 25942915
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2013 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Drive Shaft Part Number: 20912715
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15930932, 25915400
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Cadillac Escalade | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Cadillac Escalade Drive Shaft Part Number: 20912701
Product Specifications
- Other Name: Shaft Assembly-Propeller; Driveshaft; Shaft, Propeller
- Replaces: 15930933
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2013 Cadillac Escalade | Hybrid, Hybrid Platinum | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV)
View related parts
Cadillac Escalade Drive Shaft, Front Part Number: 22845693
$277.89 MSRP: $437.25
You Save: $159.36 (37%)
Product Specifications
- Other Name: Shaft Assembly-Front Axle Propeller; Driveshaft; Shaft, Propeller
- Position: Front
- Replaces: 15902926
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

Cadillac Escalade Drive Shaft

Want to cut long-term maintenance and repair costs? Choose OEM Drive Shaft. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Escalade parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Escalade Drive Shaft includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Cadillac Escalade drive shaft is another assembly that links the transmission system to the rear differential to allow the particular torque manufactured by Cadillac's, gasoline V8 or diesel I6 engines. Usually containing U-joints for the ability to change directions, the Cadillac Escalade's Drive Shaft can be two sectioned with a center support bearing and rubber cushions because of vibrations as is the case of most large vehicles such as SUVs and trucks. Since the Cadillac Escalade's first generation, different Drive Shaft variants have been used, and a one-piece and a two-piece Drive Shaft is used. The two-part Drive Shaft is specially beneficial for the unique capacity to decrease vibrations over great lengths. Should there be problems with the Drive Shaft or with components including U-joints and bearings, drivers may take note of serious, often, throbbing episodes of vibrations and sounds which get to the point that they will require replacement of Cadillac Escalade Drive Shaft collection.

Cadillac Escalade Drive Shaft Parts and Q&A

Drive Shaft
22845689
Q: How to replace the rear Drive Shaft on Cadillac Escalade?
A:
The first step for propeller shaft replacement includes precise component tagging of the driveline system before disassembly so all parts can return to their original positions during reassembly by following torque specifications. Begin by raising the vehicle. Note down the positioning of the propeller shaft regarding the rear axle pinion yoke and the transmission or Transfer Case. The yoke retainers must be removed then bolts need to be separated from the rear axle pinion yoke. When removing the yoke ears it is essential to avoid using tools between the yoke and Universal Joint because it can lead to injection joints fracture. The process for removing the propeller shaft begins with moving it forward to detach from the rear axle pinion yoke and continues with retraction back toward the transmission or Transfer Case before completing the removal of the shaft from the vehicle. The Slip Yoke splines need inspection for lubrication before installation, use gm p/n 12345879 (Canadian P/N 10953511) or equivalent gm specification 9985830 (RWD w/4-speed Automatic Transmission) as lubricant when required. Reinstall the propeller shaft into the transmission or Transfer Case by matching the reference marks from removal before inserting it to the rear axle pinion yoke where reference marks must be exactly aligned. Drop the vehicle and properly install the yoke retainers while using 25 nm (18 lb ft) torque on the retainers bolts.
Drive Shaft, Front
22845693
Q: How to replace the front drive shaft on Cadillac Escalade?
A:
You should begin propeller shaft replacement by first lifting the vehicle and then removing any Transfer Case shield that exists. Vehicle owners should replace the Transfer Case as per bw 4485-nr3 instructions while users of mp 3023/3024-nqh Transfer Case need to perform the required replacement process. The exposed end of the clamp requires prying with a flat-bladed tool in order to remove it at the Transfer Case. Avoid applying force to the yoke ears and never insert a tool between the Universal Joint and yoke to prevent damaging the injection joints. Make a note of how the front propeller shaft interacts with the drive axle flange before you uninstall all bolts and yoke retainers from the front axle pinion yoke. Keep the bearing caps from dropping. The propeller shaft needs to detach from the front axle pinion yoke and tape should be used to secure the bearing caps in their position. First remove the Transfer Case output shaft boot from its groove and then take off the propeller shaft from the output shaft. To complete the removal, unfasten the boot clamp first and then take out the boot. Before installation check the Transfer Case output shaft splines for adequate lubrication then apply gm p/n 12345879 (Canadian P/N 10953511) or an equivalent to the specified gm specification: 9985830. Place the propeller shaft boot alongside the boot clamp before slipping the propeller shaft splines into the Transfer Case output shaft while keeping the relationship marks properly aligned. Next reinstall the front axle pinion yoke propeller shaft while guarding the reference marks created at removal. Fasten Universal Joint retainers and bolts using torque of 25 nm (18 lb ft). The boot requires snapping onto the Transfer Case output shaft until it reaches the groove before crimping the clamps with j-43218 - clamp pliers - narrow jaw. The Transfer Case shield must follow specific installation procedure while inspecting the Transfer Case fluid level before the vehicle is lowered to the ground.