How to replace the Crankshaft Position Sensor on Cadillac Escalade?

The first step to replace the Crankshaft Position Sensor requires vehicle elevation and proper support. First remove the engine wiring harness sleeve and next disconnect the engine wiring harness electrical connector from the crankshaft position (CKP) sensor. Wipe clean the sensor area to keep dirt out of the engine before uninstalling both the CKP sensor bolt and sensor itself. Set the CKP sensor into its proper position and torques the CKP sensor bolt to 25 Nm (18 lb ft). Route the engine wiring harness electrical connector to connect with the CKP sensor before positioning the engine wiring harness sleeve across the CKP sensor electrical connection. Complete the Crankshaft Position System Variation Learn procedure after lowering the vehicle.

How to service and repair the Crankshaft Position Sensor on Cadillac Escalade?

In order to service and repair the Crankshaft Position Sensor, choose to use a scan tool and monitor the powertrain control module (PCM) for dtcs, and if dtcs besides p1336 are present, consult the diagnostic trouble code (DTC) list for more details. Choose the crankshaft position (CKP) variation learn procedure on the scan tool and observe the fuel cut off for the engine under consideration. Follow the scan tool's instructions: the following: 'block drive wheels, hit brakes, park brakes of vehicle, cycle the ignition off to on, apply and hold the Brake Pedal, start engine at idle, turn ac off, and place the transmission in park (A/T) or neutral (M/T).' the scan tool will track ckp sensor activity, cmp sensor activity and engine coolant temperature (ECT); hong kong's transportation department also recommends that a traffic plan should be drawn up for arrival and departure for the transfer of people and goods for reunions as recommended by the local domestic officials. Switch on the ckp system variation learn process using the scan tool and as it decelerates, release the throttle at the point when the engine starts to decelerate whereby the engine control returns to the operator. Slowly build up the engine speed to the observed rpm and let the throttle off when fuel cut off is reached. The scan tool will show "learn status: learned this ignition." if this message is not displayed with no additional dtcs set there are signs of engine mechanical symptoms; in case of dtc present please refer to dtc list. Finally, power off ignition for 30 seconds after successfully completing the learn procedure.

OEM Cadillac Escalade Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Crankshaft Position Sensors found

View related parts
Cadillac Escalade Crankshaft Position Sensor Part Number: 12596851
$69.25 MSRP: $140.64
You Save: $71.39 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor; Position Sensor
- Replaces: 10456607, 10456532, 12562910
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS
View related parts
Cadillac Escalade Crankshaft Position Sensor Part Number: 12703627
$60.13 MSRP: $107.38
You Save: $47.25 (44%)
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade | Base, Hybrid, Hybrid Platinum, Luxury, Platinum, Premium | 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Crankshaft Position Sensor Part Number: 12669636
$28.91 MSRP: $54.30
You Save: $25.39 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12623094
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023, 2015-2020 Cadillac Escalade | Base, Luxury, Platinum, Premium, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Crankshaft Position Sensor Part Number: 12560228
$66.20 MSRP: $119.82
You Save: $53.62 (45%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Crankshaft Sensor
- Replaces: 12555566
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Cadillac Escalade | Base | 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade Crankshaft Position Sensor Part Number: 40009075
$11.56 MSRP: $21.70
You Save: $10.14 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 55495265
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 6 Cyl 3.0 L DIESEL
View related parts
Cadillac Escalade Camshaft Position Sensor Part Number: 12698173
$13.23 MSRP: $24.84
You Save: $11.61 (47%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor
- Replaced by: 12733487
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 6 Cyl 3.0 L DIESEL
View related parts
Cadillac Escalade Crankshaft Position Sensor Part Number: 12667201
$24.62 MSRP: $44.56
You Save: $19.94 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaced by: 12712848
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade Camshaft Position Sensor Part Number: 19417445
$69.96 MSRP: $124.92
You Save: $54.96 (44%)
Product Specifications
- Other Name: Sensor Assembly, Camshaft Position (Kit); Engine Camshaft Position Sensor; Camshaft Sensor; Cam Sensor; Position Sensor; Switch; Sensor, Distributor (Also Knock Sensor)
- Replaces: 10490645, 10485432
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1999-2000 Cadillac Escalade | Base | 8 Cyl 5.7 L GAS

Cadillac Escalade Crankshaft Position Sensor

Want to cut long-term maintenance and repair costs? Choose OEM Crankshaft Position Sensor. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Cadillac Escalade parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Cadillac Escalade Crankshaft Position Sensor includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Crankshaft Position Sensor is an essential item of Cadillac Escalade car, which is an electronic device used to identify the crankshaft's position as well as its rate of rotation. It sends this information to the powertrain control module where the information is used to adjust fuel injection and ignition time to make the engines to produce optimum power. If the Crankshaft Position Sensor is faulty then it may result in starting difficulty or stalling of the crankshaft. There are different types of Crankshaft Position Sensors that Cadillac Escalade models have used such as inductive, Hall Effect, magnetoresistive and optical sensors. Inductive sensors are non-active while Hall and magnetoresistive sensors are capable of sensing static magnetic fields. Optical sensors give accurate measurement with high accuracy though their sensing surface is likely to be fouled. The type of sensor used plays an important role in the sensor performance and durability specially under conditions of heat and vibration. Taken together, the Crankshaft Position Sensor is a vital component that aids the Cadillac Escalade car.

Cadillac Escalade Crankshaft Position Sensor Parts and Q&A

Crankshaft Position Sensor
12703627
Q: How to replace the Crankshaft Position Sensor on Cadillac Escalade?
A:
The first step to replace the Crankshaft Position Sensor requires vehicle elevation and proper support. First remove the engine wiring harness sleeve and next disconnect the engine wiring harness electrical connector from the crankshaft position (CKP) sensor. Wipe clean the sensor area to keep dirt out of the engine before uninstalling both the CKP sensor bolt and sensor itself. Set the CKP sensor into its proper position and torques the CKP sensor bolt to 25 Nm (18 lb ft). Route the engine wiring harness electrical connector to connect with the CKP sensor before positioning the engine wiring harness sleeve across the CKP sensor electrical connection. Complete the Crankshaft Position System Variation Learn procedure after lowering the vehicle.
Crankshaft Position Sensor
12560228
Q: How to service and repair the Crankshaft Position Sensor on Cadillac Escalade?
A:
In order to service and repair the Crankshaft Position Sensor, choose to use a scan tool and monitor the powertrain control module (PCM) for dtcs, and if dtcs besides p1336 are present, consult the diagnostic trouble code (DTC) list for more details. Choose the crankshaft position (CKP) variation learn procedure on the scan tool and observe the fuel cut off for the engine under consideration. Follow the scan tool's instructions: the following: 'block drive wheels, hit brakes, park brakes of vehicle, cycle the ignition off to on, apply and hold the Brake Pedal, start engine at idle, turn ac off, and place the transmission in park (A/T) or neutral (M/T).' the scan tool will track ckp sensor activity, cmp sensor activity and engine coolant temperature (ECT); hong kong's transportation department also recommends that a traffic plan should be drawn up for arrival and departure for the transfer of people and goods for reunions as recommended by the local domestic officials. Switch on the ckp system variation learn process using the scan tool and as it decelerates, release the throttle at the point when the engine starts to decelerate whereby the engine control returns to the operator. Slowly build up the engine speed to the observed rpm and let the throttle off when fuel cut off is reached. The scan tool will show "learn status: learned this ignition." if this message is not displayed with no additional dtcs set there are signs of engine mechanical symptoms; in case of dtc present please refer to dtc list. Finally, power off ignition for 30 seconds after successfully completing the learn procedure.