How to Service and Repair the Throttle Cable on Buick LeSabre?

The replacement process for the Throttle Cable begins by taking off the left closeout/insulator panel. To install the replacement of the Throttle Cable start by disconnecting it from the accelerator pedal lever. Then use the Throttle Cable cover tangs to compress and feed the cable through the bulkhead. The Throttle Cable requires removal in two locations. Start by removing it first from its retaining clip and then from the right position situated on top of the washer bottle. Separate the Throttle Cable segment first from the Throttle Body lever and then from the Throttle Cable bracket. The installation requires the Throttle Cable to pass through the bulkhead after which install the snap retainer. Guide the Throttle Cable into the slot of the accelerator pedal lever and validate when the cable fits properly with the accelerator pedal lever. The dash panel insulator must be attached to the Throttle Cable followed by pushing the retainer along the cable lever end fitting until it snaps onto the cable's dash fitting flange while resting flush against the dash mat. Open the throttle from wide open to full closed without cable resistance and operate the accelerator pedal to confirm full and complete throttle range by positioning the cable hook within the Throttle Body lever. Reinstall the Throttle Cable to the retaining clip while reattaching the left closeout/insulator panel after securing the Throttle Cable to the Throttle Cable bracket which fits to the right slot on top of the washer bottle.

How to replace the throttle cable on Buick Regal?

Start the throttle cable replacement procedure by removing first the fuel injector sight shield and the left instrument panel sound insulator. The throttle cable must be separated from the pedal while mechanics wire should be attached to its end for easier cable installation work. Pull the throttle cable through the bulkhead after squeezing its tangs and locate the cable between the retaining clip and throttle body lever and throttle cable bracket. Check the cable pathway then remove its mechanics wire. Secure the mechanics wire to the new throttle cable for installation only when the pre-defined routing from removal has been achieved while keeping all exposed parts at minimum 50 mm (2 in) from moving components unless they are fully attached. The bulkhead provides a passage for the cable which must be fastened using the snap retainer. Replace the mechanics wire with the cable which needs to be fastened to the throttle pedal and throttle body lever with throttle cable bracket using its retaining clip. Operation of the throttle pedal must be checked for full throttle functions while confirming fluid pedal movement without any restrictions. After completing the final steps install the left instrument panel sound insulator together with the fuel injector sight shield.

OEM Buick Throttle Cable

Accelerator Throttle Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

56 Throttle Cables found

View related parts
Buick Throttle Cable Part Number: 21992583
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable; Cable, Accelerator Control
- Replaces: 25688966
Fits the following Buick Models:
- Park Avenue | 2000-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Throttle Cable Part Number: 12567430
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable, Accelerator Control
Fits the following Buick Models:
- Century | 2005, 1999-2003 | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
View related parts
Buick Throttle Cable Part Number: 22659533
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable; Cable, Accelerator Control
- Replaces: 22659190, 22652192
Fits the following Buick Models:
- Skylark | 1996-1998 | Custom, Limited, Olympic Gold Edition | 4 Cyl 2.4 L GAS
View related parts
Buick Throttle Cable Part Number: 10332800
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable, Accelerator Control
- Replaces: 12567431
Fits the following Buick Models:
- Century | 2004 | Custom, Limited | 6 Cyl 3.1 L GAS
- Regal | 2000-2004 | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View related parts
Buick Throttle Cable Part Number: 12563915
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable; Cable, Accelerator Control
- Replaces: 12558570
Fits the following Buick Models:
- Rendezvous | 2002-2005 | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Cable Part Number: 22553063
Product Specifications
- Other Name: Cable Assembly-Cruise Control Servo; Cable, Cruise Control
Fits the following Buick Models:
- Skylark | 1992-1993 | Custom, Gran Sport, Limited | 6 Cyl 3.3 L GAS
View related parts
Buick Throttle Cable Part Number: 10220988
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable, Accelerator Control
Fits the following Buick Models:
- Regal | 1993-1995 | Custom, Gran Sport, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Cable Part Number: 22573341
Product Specifications
- Other Name: Cable Assembly-Cruise Control Servo; Cable, Cruise Control
Fits the following Buick Models:
- Skylark | 1993 | Custom, Limited | 4 Cyl 2.3 L GAS
View related parts
Buick Throttle Cable Part Number: 10242757
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable, Accelerator Control
Fits the following Buick Models:
- Century | 1994-1996 | Custom, Limited, Special | 6 Cyl 3.1 L GAS
View related parts
Buick Cable Part Number: 10041793
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable, Accelerator Control
Fits the following Buick Models:
- Skylark | 1988 | Custom, Limited | 4 Cyl 2.5 L GAS
View related parts
Buick Throttle Cable Part Number: 10111518
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable, Accelerator Control
Fits the following Buick Models:
- Century | 1992 | Custom, Limited, Special | 4 Cyl 2.5 L GAS
View related parts
Buick Actuator Cable Part Number: 10174471
Product Specifications
- Other Name: Cable, Accelerator Control; Cable
Fits the following Buick Models:
- Regal | 1991 | Custom, Limited | 6 Cyl 3.1 L GAS
View related parts
Buick Throttle Cable Part Number: 22638837
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable; Cable, Accelerator Control
Fits the following Buick Models:
- Skylark | 1995 | Custom, Gran Sport, Limited | 6 Cyl 3.1 L GAS
View related parts
Buick Throttle Cable Part Number: 10217558
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable, Accelerator Control
Fits the following Buick Models:
- Century | 1993 | Custom, Limited, Special | 6 Cyl 3.3 L GAS
View related parts
Buick Servo Cable Part Number: 25615098
Product Specifications
- Other Name: Cable Assembly-Cruise Control Servo; Cruise Servo Cable; Cable; Cable, Cruise Control
Fits the following Buick Models:
- LeSabre | 1992-1995 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1992-1995 | Base, Ultra | 6 Cyl 3.8 L GAS
- Riviera | 1995 | Base | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Servo Cable Part Number: 25619424
Product Specifications
- Other Name: Cable Assembly-Cruise Control Servo; Cable; Cable, Cruise Control
Fits the following Buick Models:
- LeSabre | 1995 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1995 | Base | 6 Cyl 3.8 L GAS
View related parts
Buick Throttle Cable Part Number: 22652190
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable; Cable, Accelerator Control
Fits the following Buick Models:
- Skylark | 1996 | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS
View related parts
Buick Throttle Cable Part Number: 10079836
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable, Accelerator Control
Fits the following Buick Models:
- Century | 1992 | Custom, Limited, Special | 6 Cyl 3.3 L GAS
View related parts
Buick Throttle Cable Part Number: 25553814
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable, Accelerator Control
Fits the following Buick Models:
- LeSabre | 1992-1994 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 1992-1995 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Throttle Cable Part Number: 12552279
Product Specifications
- Other Name: Cable Assembly-Accelerator Control; Cable, Accelerator Control
Fits the following Buick Models:
- Roadmaster | 1996 | Collector's Edition, Estate Wagon Collector's Edition, Limited Collector's Edition | 8 Cyl 5.7 L GAS

| Page 1 of 3 |Next >

1-20 of 56 Results

Buick Throttle Cable

Choose OEM Throttle Cable, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Throttle Cable. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Throttle Cable connects your foot to the engine to deliver sharp predictable power. Buick has pursued a smooth quiet ride since 1903 allowing road bumps to be forgotten and cabins to remain calm. The brand combines vintage classiness with modern technology such as the silent tuning enabling the conversations to be heard even at high speed on the highway. The Wildcat EV concept is one of the first steps to an all-electric future displayed by Buick and demonstrated that fashion could move without noise and smell. Drivers will have faith in the name because its vehicles seem to stick to corners and are gentle on uneven surfaces, and its badge is 100 years of practical modifications that place comfort first without the flashy tricks. No flashiness, only gradual sophistication that makes errands effortless and lengthy journeys effortless. Buick continues to believe in true convenience of the real world rather than hype and continues to upgrade to suit the modern lifestyle without compromising the relaxed feel. The Throttle Cable translates pedal action to the throttle plate using a tough braided cable that is not prone to stretch or slop giving the engine immediate air alterations and the driver clear acceleration indications. A contemporary Throttle Cable does not stick because of low friction liners and tight assembly tolerances, and the direct mechanical route is providing feedback electronic controls can often deaden. The cable is still in use today, decades after upgrades and it continues to serve the purpose of providing stable idle, smooth cruising and quick passing of power through the lineup.

Buick Throttle Cable Parts and Q&A

Throttle Cable
25654686
Q: How to Service and Repair the Throttle Cable on Buick LeSabre?
A:
The replacement process for the Throttle Cable begins by taking off the left closeout/insulator panel. To install the replacement of the Throttle Cable start by disconnecting it from the accelerator pedal lever. Then use the Throttle Cable cover tangs to compress and feed the cable through the bulkhead. The Throttle Cable requires removal in two locations. Start by removing it first from its retaining clip and then from the right position situated on top of the washer bottle. Separate the Throttle Cable segment first from the Throttle Body lever and then from the Throttle Cable bracket. The installation requires the Throttle Cable to pass through the bulkhead after which install the snap retainer. Guide the Throttle Cable into the slot of the accelerator pedal lever and validate when the cable fits properly with the accelerator pedal lever. The dash panel insulator must be attached to the Throttle Cable followed by pushing the retainer along the cable lever end fitting until it snaps onto the cable's dash fitting flange while resting flush against the dash mat. Open the throttle from wide open to full closed without cable resistance and operate the accelerator pedal to confirm full and complete throttle range by positioning the cable hook within the Throttle Body lever. Reinstall the Throttle Cable to the retaining clip while reattaching the left closeout/insulator panel after securing the Throttle Cable to the Throttle Cable bracket which fits to the right slot on top of the washer bottle.
Throttle Cable
10332800
Q: How to replace the throttle cable on Buick Regal?
A:
Start the throttle cable replacement procedure by removing first the fuel injector sight shield and the left instrument panel sound insulator. The throttle cable must be separated from the pedal while mechanics wire should be attached to its end for easier cable installation work. Pull the throttle cable through the bulkhead after squeezing its tangs and locate the cable between the retaining clip and throttle body lever and throttle cable bracket. Check the cable pathway then remove its mechanics wire. Secure the mechanics wire to the new throttle cable for installation only when the pre-defined routing from removal has been achieved while keeping all exposed parts at minimum 50 mm (2 in) from moving components unless they are fully attached. The bulkhead provides a passage for the cable which must be fastened using the snap retainer. Replace the mechanics wire with the cable which needs to be fastened to the throttle pedal and throttle body lever with throttle cable bracket using its retaining clip. Operation of the throttle pedal must be checked for full throttle functions while confirming fluid pedal movement without any restrictions. After completing the final steps install the left instrument panel sound insulator together with the fuel injector sight shield.