How to Remove and Install the Parking Brake Cable on a Buick Enclave?

You need to raise the vehicle for changing the front parking brake cable. The first step involves slackening the locknut on the park brake cable by the equalizer followed by disconnecting the front cable from the rear cable. The J 37043 (Parking Brake Cable Release Tool) enables front cable extraction from its bracket when the locking tabs on the cable conduit are compressed. The removal process starts by taking out the left instrument panel insulator panel with the addition of removing the driver side front carpet retainer and extracting both nuts and the driver footrest. Accessibility to the front park brake cable routing clip requires lifting the driver floor carpet so you can disable the cable attachment to the park brake pedal clevis by removing the clip from the floor stud. Uninstall the conduit cable assembly while depressing the locking tabs on its attachment point. The front new park brake cable assembly must be placed in position with the park brake pedal clevis connected to complete the process while verifying full tab engagement on the conduit. Pass the cable through the floor before seating the grommet while attaching the routing clip to its floor stud. The new driver floor carpet with footrest installation should include torquing the 2 nuts to 10 Nm (89 lb in). The park brake warning indicator switch electrical connector should be reconnected then the driver side front carpet retainer and the left side instrument panel insulator panel must be reinstalled. Complete the front park brake cable installation by connecting it to the bracket through engaged conduit locking tabs before connecting and final adjustment of the park brake.

How to replace the front parking brake cable on Buick Regal?

One should start by lifting and supporting the vehicle before releasing tension from the parking brake equalizer before proceeding. First disconnect the front cable from its connector then remove it from all the guide paths on the equalizer. The installation process requires users to first lower the vehicle while removing the left side closeout/insulator panel together with the lower center pillar panel on the left side and the left side carpet retainers. After reaching the front park brake cable through access underneath the carpet you need to take off the retaining clip before disconnecting the cable from its clevis attachment. Using Tool J 37043 release the retainer which holds the cable on the pedal bracket assembly while you remove the front cable from the vehicle by noting its installation path. The front cable must be placed into the specified opening in the vehicle during installation and then mounted against the park brake pedal bracket before inserting the cable button end into the clevis that requires a retaining clip to secure. Add carpet retainers on the left side and install closely the lower center pillar trim and the left side closeout/insulator panel. Support the automatic transmission vehicle once more before guiding the front park brake cable through its guides to the equalizer. The front park brake cable should be attached to the rear cable through the connector clip before tightening the equalizer nut to eliminate cable slack then lowering the vehicle.

OEM Buick Parking Brake Cable

Emergency Parking Brake Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

120 Parking Brake Cables found

View related parts
Buick Rear Cable Part Number: 23227766
$56.33 MSRP: $109.37
You Save: $53.04 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Parking Brake; Brake Cable; Cable, Parking Brake
- Position: Rear
- Replaces: 13261156, 22821392, 22944243
Fits the following Buick Models:
- LaCrosse | 2014-2016, 2010-2011 | Base, CX, CXL, CXS, Leather, Premium, Sport Touring | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
- Regal | 2011-2017 | Base, CXL, GS, Premium, Sport Touring | 4 Cyl 2.0 L FLEX, 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick Parking Brake Cable, Driver Side Part Number: 15242626
$42.12 MSRP: $57.58
You Save: $15.46 (27%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable; Rear Cable
- Position: Driver Side
- Replaces: 10310911, 10405321
Fits the following Buick Models:
- Century | 2000-2005 | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
- LaCrosse | 2008-2009 | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
- Regal | 2000-2004 | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Front Cable Part Number: 22576902
$12.23 MSRP: $51.98
You Save: $39.75 (77%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
Fits the following Buick Models:
- Skylark | 1992-1994 | Custom, Gran Sport, Limited | 4 Cyl 2.3 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS
View related parts
Buick Front Cable Part Number: 10306508
$18.74 MSRP: $66.02
You Save: $47.28 (72%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Replaces: 10272392
Fits the following Buick Models:
- Regal | 1994-1996 | Custom, Gran Sport, Limited, Olympic Gold Edition | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Rear Cable Part Number: 10398385
$31.62 MSRP: $96.07
You Save: $64.45 (68%)
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
Fits the following Buick Models:
- Terraza | 2005-2006 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS
View related parts
Buick Rear Cable Part Number: 10199204
$22.63 MSRP: $59.89
You Save: $37.26 (63%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
Fits the following Buick Models:
- Regal | 1993 | Custom, Gran Sport, Limited | 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Rear Cable Part Number: 25826511
$142.80 MSRP: $277.16
You Save: $134.36 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Replaces: 25780272
Fits the following Buick Models:
- Enclave | 2008-2017 | Base, CX, CXL, Convenience, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Rear Cable Part Number: 23475049
$176.66 MSRP: $340.69
You Save: $164.03 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
- Replaces: 25780271, 25876316
Fits the following Buick Models:
- Enclave | 2008-2017 | Base, CX, CXL, Convenience, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Intermediate Cable Part Number: 25530397
$22.26 MSRP: $41.42
You Save: $19.16 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable Assembly-Parking Brake Intermediate; Brake Cable; Cable; Cable, Parking Brake
Fits the following Buick Models:
- Electra | 1988-1989 | Limited, Park Avenue, Park Avenue Ultra, T-Type | 6 Cyl 3.8 L GAS
- LeSabre | 1988-1989 | Base, Custom, Limited | 6 Cyl 3.8 L GAS
View related parts
Buick Rear Cable Part Number: 10223644
Product Specifications
- Other Name: Cable; Brake Cable; Cable, Parking Brake
- Position: Rear
Fits the following Buick Models:
- Roadmaster | 1994-1996 | Base, Collector's Edition, Estate Wagon, Estate Wagon Collector's Edition, Limited, Limited Collector's Edition | 8 Cyl 5.7 L GAS
View related parts
Buick Rear Cable Part Number: 15177263
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
Fits the following Buick Models:
- Terraza | 2005-2007 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Front Cable Part Number: 15241414
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
- Replaces: 10305830
Fits the following Buick Models:
- LaCrosse | 2005-2009 | CX, CXL, CXS | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS
View related parts
Buick Front Cable Part Number: 10080805
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable; Cable
- Position: Front
Fits the following Buick Models:
- Century | 1984-1996 | Custom, Estate, Estate Wagon, Limited, Olympia Limited, Special, T-Type | 4 Cyl 2.2 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 6 Cyl 3.0 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.3 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.3 L DIESEL
- Skylark | 1984-1985 | Custom, Limited, T-Type | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS
View related parts
Buick Rear Cable Part Number: 15241415
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
Fits the following Buick Models:
- LaCrosse | 2005-2009 | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick Parking Brake Cable, Passenger Side Part Number: 15297496
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable; Rear Cable
- Position: Passenger Side
- Replaces: 10310910
Fits the following Buick Models:
- Century | 2001-2005 | Custom, Limited, Special Edition | 6 Cyl 3.1 L GAS
- LaCrosse | 2008-2009 | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
- Regal | 2001-2004 | GS, LS | 6 Cyl 3.8 L GAS
View More
View related parts
Buick Front Cable Part Number: 15235099
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Front
Fits the following Buick Models:
- Terraza | 2005-2007 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Rear Cable Part Number: 10080807
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
Fits the following Buick Models:
- Electra | 1984-1987 | Estate Wagon, Limited, Park Avenue | 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
- LeSabre | 1984-1985 | Collector's Edition, Custom, Limited | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L DIESEL
View related parts
Buick Parking Brake Cable Part Number: 25743469
Product Specifications
- Other Name: Cable Assembly-Parking Brake Intermediate; Brake Cable; Intermediate Cable; Cable, Parking Brake
Fits the following Buick Models:
- LeSabre | 2001-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 2001-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Parking Brake Cable Part Number: 25712419
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable; Rear Cable
Fits the following Buick Models:
- LeSabre | 2001-2005 | Custom, Limited | 6 Cyl 3.8 L GAS
- Park Avenue | 2001-2005 | Base, Ultra | 6 Cyl 3.8 L GAS
View related parts
Buick Rear Cable Part Number: 15239166
Product Specifications
- Other Name: Cable, Parking Brake; Brake Cable
- Position: Rear
Fits the following Buick Models:
- Terraza | 2005-2006 | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L GAS

| Page 1 of 6 |Next >

1-20 of 120 Results

Buick Parking Brake Cable

Choose OEM Parking Brake Cable, you're making the optimal decision for superior quality and perfect performance. You can feel confident because each component goes through stringent quality checks. Every part is carefully built to comply with Buick's factory specifications. You'll enjoy a smooth, worry-free installation that fits just right. At ChevyPartsDeal.com, you'll find it easy to get top-quality OEM Buick Parking Brake Cable. You can shop at highly competitive prices and protect your budget. All our genuine Buick parts include a dependable manufacturer's warranty. You'll also appreciate our straightforward return policy and swift delivery services for extra convenience.

Buick Parking Brake Cable fixes the wheels in place regardless of the car lying on any slope. Buick was born in 1903 and developed a reputation for rides that are smooth despite damaged roads. The company combined the pioneering engineering of the early era with the current day silent tuning to ensure low cabin noise. Features such as the easy steering and seats make long journeys less eventful. Classic silhouettes were sharpened, but the badge continues to have a wink at a hundred years of road history. In 2022 the brand displayed the Wildcat EV concept, which proves that it will move to electric power without abandoning comfort. Traditional and progressive technology collide, and shoppers have tradition in their breath. The balance is what keeps the loyalty between generations high. All Buicks are launched with a view to city comfort and highway silence. Parking Brake Cable connects the rear brakes to the pedal and turns the force of the foot into a solid mechanical clamp. It is connected to the brake circuit directly and thus the car does not move even when the hydraulic pressure is lost during parking on hilly slopes. Stretch or rust is represented by a longer action of the pedal, a weaker hold, or the warning light that refuses to wink. Have a regular check of the Parking Brake Cable and replace it when it is worn out as a loose line means a situation involving a simple park may become an uncontrolled runaway. Installation involves manufacture routing, maintains bends mild and prevents the appearance of chafe points that can cut through strands with time.

Buick Parking Brake Cable Parts and Q&A

Front Cable
15115045
Q: How to Remove and Install the Parking Brake Cable on a Buick Enclave?
A:
You need to raise the vehicle for changing the front parking brake cable. The first step involves slackening the locknut on the park brake cable by the equalizer followed by disconnecting the front cable from the rear cable. The J 37043 (Parking Brake Cable Release Tool) enables front cable extraction from its bracket when the locking tabs on the cable conduit are compressed. The removal process starts by taking out the left instrument panel insulator panel with the addition of removing the driver side front carpet retainer and extracting both nuts and the driver footrest. Accessibility to the front park brake cable routing clip requires lifting the driver floor carpet so you can disable the cable attachment to the park brake pedal clevis by removing the clip from the floor stud. Uninstall the conduit cable assembly while depressing the locking tabs on its attachment point. The front new park brake cable assembly must be placed in position with the park brake pedal clevis connected to complete the process while verifying full tab engagement on the conduit. Pass the cable through the floor before seating the grommet while attaching the routing clip to its floor stud. The new driver floor carpet with footrest installation should include torquing the 2 nuts to 10 Nm (89 lb in). The park brake warning indicator switch electrical connector should be reconnected then the driver side front carpet retainer and the left side instrument panel insulator panel must be reinstalled. Complete the front park brake cable installation by connecting it to the bracket through engaged conduit locking tabs before connecting and final adjustment of the park brake.
Parking Brake Cable, Driver Side
15242626
Q: How to replace the front parking brake cable on Buick Regal?
A:
One should start by lifting and supporting the vehicle before releasing tension from the parking brake equalizer before proceeding. First disconnect the front cable from its connector then remove it from all the guide paths on the equalizer. The installation process requires users to first lower the vehicle while removing the left side closeout/insulator panel together with the lower center pillar panel on the left side and the left side carpet retainers. After reaching the front park brake cable through access underneath the carpet you need to take off the retaining clip before disconnecting the cable from its clevis attachment. Using Tool J 37043 release the retainer which holds the cable on the pedal bracket assembly while you remove the front cable from the vehicle by noting its installation path. The front cable must be placed into the specified opening in the vehicle during installation and then mounted against the park brake pedal bracket before inserting the cable button end into the clevis that requires a retaining clip to secure. Add carpet retainers on the left side and install closely the lower center pillar trim and the left side closeout/insulator panel. Support the automatic transmission vehicle once more before guiding the front park brake cable through its guides to the equalizer. The front park brake cable should be attached to the rear cable through the connector clip before tightening the equalizer nut to eliminate cable slack then lowering the vehicle.